Used Water Goblin for sale (7,588)

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total height: 4,500 mm, total width: 7,200 mm, total length: 8,500 mm, temperature: 35 °C, energy consumption: 300 kWh, Equipment: documentation/manual, For sale are three unused heat pump vacuum evaporators from Blue Water Plants, manufactured in 2020. The units were delivered for concentrate thickening at a biogas plant in southern France, were preserved at the factory, and have never been operated productively. The evaporators can be purchased individually or as a package. Scope of delivery: 1x Main evaporator, distillate output approx. 55 m³/day 2x Evaporator Type 12,000, distillate output each approx. 12 m³/day Total capacity in combination: up to approx. 79 m³/day Operating principle: The evaporators operate under vacuum at a low boiling temperature. An integrated heat pump recovers the evaporation heat, which is why the energy requirement is significantly lower than with conventional thermal evaporation. The wastewater is separated into two streams: a distillate with low residual load and a thickened concentrate with a greatly reduced volume. An integrated acid reaction binds ammonia as an ammonium sulfate solution. This solution can be used as a liquid nitrogen fertilizer. Typical applications: Biogas plants: Treatment of fermentation residue and digestate, recovery of nitrogen as ammonium sulfate fertilizer, reduction of storage and application volume Composting and waste treatment plants: Thickening of leachate from storage areas and composting processes Agriculture: Volume reduction of slurry and storage basin water, nutrient recovery Food and beverage industry: Thickening of organically contaminated process wastewater, for example from dairies, breweries or juice and vegetable processing Concentrate treatment: Further thickening of concentrates from reverse osmosis or membrane filtration with organic and nitrogenous loads Reduce disposal costs: Instead of disposing of the entire wastewater externally, only the thickened concentrate is now disposed of. The distillate can be reused or discharged after further treatment. Not suitable for: The evaporators are designed for organically and ammonium-contaminated wastewater. They are not intended for saline water such as seawater, brine, drilling fluids, reservoir water or heavily chloride-contaminated industrial wastewater. High salt and chloride loads lead to crystallization and scale formation on the heat exchanger surfaces and increase the risk of corrosion. For such applications, RIEFILT offers suitable alternatives on request. Note on distillate quality: Depending on the inflow, the distillate may contain residual levels of ammonium and COD. For discharge or reuse, RIEFILT offers suitable post-treatment via reverse osmosis. Codoyr H Anopfx Aqvshd Peripherals (optional): Acid module 20 m³ (H2SO4), pH reactors, adiabatic cooling tower 47 m³/h Documentation: Process flow diagram incl. tank, pump and dosing list, technical documents and CE conformity declarations. Photos available on request. Conditions: Sale exclusively through RIEFILT GmbH. EXW South France, FCA/DAP on request. Inspection by appointment. Price on request.

Condition: like new (used), Year of construction: 2020, operating hours: 2 h, functionality: unexamined, machine/vehicle number: HY-1000LPH, input voltage: 220 V, total height: 2,000 mm, total width: 1,000 mm, total length: 2,300 mm, energy consumption: 4 kWh, Equipment: documentation/manual, Reverse osmosis unit, purchased in 2020, and only tested once in 2024. Chedpfx Aoz Iqrnsqvod The machine is being sold as is.

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 9558, Used fully functional WJS waterjet cutting machine with KMT SLIV 50 HP pump. Machine is in disassembled condition and can not be inspected. Installation and commissioning will be done by us and is not included in the price. The machine can also be completely overhauled Cedpfx Aqji Hckrovohd ( new control cabinet, new control and new CE. This would mean a surcharge of about 50.000€)

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min Chedsxgua Ajpfx Aqved • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: used, Veolia Water System, Model - Orion 2000 Orion™ is a skid-mounted, multi-technology purified water production system. Offering softening, reverse osmosis and continuous electrodeionization (CEDI) technologies that can be fully or partially hot water sanitized. Ideal for use as a pharmaceutical water system for the generation of purified water. Orion is digitally-enabled to offer the ability to remotely monitor any parameters you want. Csdpfxjz Ic T Rs Aqvjhd

Condition: used, This listing is for the Grant GD120 Water Bath/Circulator The unit is in full working condition and is ready for immediate use The Grant GD120 is a digitally controlled stirred water bath and circulator ideal for laboratory use, offering high precision and flexibility. Here's a breakdown of its features and capabilities: Key Features Immersion Thermostat with Intelligent Control Optimisation (ICO): Enables adaptive PID control for exceptionally stable temperature regulation. Integral Pump: Built-in circulation pump with a maximum flow rate of 17 L/min, allowing both sample immersion and external fluid circulation. User Interface: Equipped with a clear digital display, a rotor plus two-key control, timer function for reaction timing, and visual + audible alarms to notify operators of critical conditions. Cedpjxhfl Eefx Aqvjhd Preset Temperature Control: Supports one adjustable operating setpoint plus three preset temperature options for fast switching. Safety Features: Includes float-switch low liquid protection and an adjustable over-temperature cut-out for sample and user safety. Liquid Type Selection: Automatically adjusts heater power and temperature parameters depending on chosen liquid (e.g., water, oil, glycol mixtures). Temperature Range & Accuracy Plastic Tanks (P-series): From around ambient +5 °C up to ~99 °C. Stainless Steel Tanks (S-series): From –15 °C up to ~120 °C. High Stability: ±0.02 °C for stable temperature control. Technical Specifications & Obsolescence The GD120 series includes multiple tank sizes: plastic tanks (P5, P12, P18) and stainless steel tanks (S5, S12, S18, S26, S38), offering varied capacities for different lab needs. This series is now considered obsolete, though it remains functional and reliable for many applications. Supporting Documentation & Manual Operating Manual: The GD120 is covered by the general purpose stirred thermostatic baths manual (shared with GD100), outlining temperature settings, calibration procedures, safety guidance, and maintenance. Datasheet Summary: Positioned within the broader Grant Optima product range, the GD120 sits between simpler (GD100, up to 100 °C) and higher-spec models (GR150 up to 150 °C, GP200 up to 200 °C)

Condition: refurbished (used), Year of construction: 2006, table length: 3,500 mm, table width: 1,500 mm, Pictures are in current condition - two Z-axes - 1 x 45° Schnedikopf , 1 x 2D - control unit will be renewed Chsdpfx Aqsnab Rzovjd - will be sandblasted and repainted - pump optionally available - available in 12-16 weeks after order Special features: - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: refurbished (used), Year of construction: 1999, - two cutting heads - control unit is renewed - will be sandblasted and repainted - Pump optionally available - available in 12-16 weeks after order Special features Chedpfjnab Siox Aqved - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: refurbished (used), Year of construction: 2000, table length: 1,000 mm, table width: 1,000 mm, operating pressure: 3,800 bar, (Pictures in current state) - prepared for two cutting heads (1x pure water) - Control unit will be renewed Chsdponab Rlofx Aqvsd - will be sandblasted and repainted - Pump optionally available - available after order in 12-16 weeks Special features: - max. two cutting heads per Z-axis - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: good (used), Year of construction: 2002, operating hours: 46,928 h, functionality: fully functional, total width: 1,400 mm, total length: 1,500 mm, total height: 1,400 mm, type of input current: AC, overall weight: 1,800 kg, input voltage: 400 V, Technical specifications of the JCP 45 in detail Chjdpfo Agvb Uox Aqvod Parameter Specification / Value Rated power 45 kW Maximum pressure 4,000 bar (constant working pressure) Flow rate 4.7 l/min (up to 5 l/min at reduced pressure) Pressure ratio 1:13 to 1:16 (oil to water pressure) Maximum oil pressure 300 bar Pressure stages 2 pressure stages / continuously adjustable Electrical connection 3x 400V / 230V, 50Hz Required air pressure min. 6 bar (maximum 7 bar for control) Cooling system Oil-water cooling or alternatively oil-air cooling Noise level approx. 78 dB Dimensions (W x H x D) 1,500 x 1,400 x 1,400 mm Weight 1,800 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm Chsdjxgumcepfx Aqved - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: good (used), functionality: fully functional, Year of construction: 2002, • 4 new EDI cells MK3 are available. • 7 EDI stations, each with 4 EDI cells MK3, will be dismantled. Chodpfx Aswy Uu Ajqvjd

Condition: used, Grundfos Vertical Water Pump Complete with isolator valve Chodsz E Nhvjpfx Aqvod Power isolator switch 1.5 kw 5.7 m3/hr H max 60m

Condition: new, Year of construction: 2025, LG WATER SOLUTIONS LG SW 400 GR REVERSE OSMOSIS MEMBRANES – 36 UNITS Lot of 36 new and unused LG Water Solutions reverse osmosis membrane elements. All units remain sealed and originate from the surplus spare-parts stock of a PET manufacturing plant. TECHNICAL DATA Manufacturer: LG Water Solutions Chodpfx Aqszvlrzovsd Model: LG SW 400 GR Equipment type: Reverse osmosis membrane elements Application: Seawater reverse osmosis (SWRO) Dimensions: 8 × 40 inches Certification: NSF certified Quantity available: 36 units Condition: New, unused and sealed Origin: Surplus spare-parts stock from a PET manufacturing plant

Condition: used, Year of construction: 2014, Lamella clarifier Chamber filter press Chodpo Ah Hkdjfx Aqvod Dirty water pump Mixing tank Control system

Condition: good (used), Year of construction: 2017, operating hours: 12,900 h, functionality: fully functional, machine/vehicle number: 20170777, repeat accuracy: 0.03 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.06 mm, type of input current: three-phase, input voltage: 400 V, operating pressure: 4,000 bar, power of the servo motor: 37,000 W, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 200 mm, total height: 3,500 mm, total length: 6,200 mm, total width: 3,200 mm, water pressure: 4,000 bar, control cabinet height: 1,950 mm, compressed air connection: 7 bar, pump pressure: 4,000 bar, control cabinet width: 800 mm, overall weight: 7,500 kg, product height (max.): 200 mm, input frequency: 50 Hz, power: 37 kW (50.31 HP), Equipment: safety light barrier, Waterjet cutting system Perndorfer type WSS4020, table size 4000/2000 mm, high-pressure pump BFT Ecotron with 37 kW and 4000 bar cutting pressure, 3D cutting head for contour cutting. The machine is used and in good condition, and has recently undergone an overhaul by the manufacturer. The machine can be inspected and tested at any time. Chsdpox H Ny Tefx Aqved

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 75 bar, total height: 2,800 mm, total width: 2,500 mm, total length: 12,000 mm, temperature: 38 °C, operating pressure: 75 bar, energy consumption: 60 kWh, Equipment: documentation/manual, Containerized, two-stage high-pressure reverse osmosis system for landfill leachate, liquid waste, and saline industrial wastewater. The system is designed for a conductivity of up to 35,000 µS/cm and a COD of up to 10,000 mg/l. It is overhauled and tested with brine solution at the factory before delivery. The FAT protocol is included in the scope of supply. PERFORMANCE DATA (Design 35 mS/cm, 20 °C) - Feed: max. 8.33 m³/h or 200 m³/day - Permeate: 5.0 m³/h or 120 m³/day (60% recovery, higher with lower salt load) - Concentrate: 3.33 m³/h or 80 m³/day - Conversion to approx. 10 m³/h permeate possible (upon request) STAGE 1 (WASTEWATER STAGE) - 30 ST+-Spacer-Tube modules with open channel, fouling-tolerant - 795 m² membrane area - 2 frequency-controlled high-pressure pumps, operating pressure 60 to 70 bar, max. 75 bar STAGE 2 (PERMEATE STAGE) - 6 ST+-Modules, 159 m² membrane area - 1 frequency-controlled high-pressure pump, max. 75 bar - Concentrate is returned to stage 1 EQUIPMENT - Automatic double multi-layer filter with backwash - Cartridge filter with differential pressure monitoring - Acid dosing for pH adjustment, antiscalant dosing station 100 l - Dosing stations for alkaline and acidic cleaner, 250 l each - Integrated chemical cleaning (CIP) - Degassing and blower station for the permeate, permeate tank for outdoor installation - Pipelines: low-pressure PVC, high-pressure stainless steel 1.4571 - PLC with panel PC, data logging and remote access - Insulated 40-ft container with separate, segregated switchgear room - Module crane, heating, lighting, ventilation, emergency shower, hand washing basin - Components: Grundfos, GEMÜ, GF Piping Systems, CAT Pumps, EMZ - Documentation (mechanics, electrical, R&I, layout) and operating manual in English APPLICATIONS Landfill leachate, liquid waste treatment, industrial wastewater with high salt and COD load, concentrate reduction before evaporators, rental and emergency applications. OPTIONAL (not included in the scope of supply) Transport, installation, commissioning, training, raw water tank and feed pump, ion exchanger or activated carbon for post-treatment. Chsdpfx Aqj Ahpltsvjd CONDITIONS Purchase or lease-purchase over up to 36 months. Warranty 6 months from commissioning on the overhauled components. Service support (remote monitoring, membrane management, spare parts) as a separate package. Binding statements on permeate quality after submission of your water analysis.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: DC, warranty duration: 24 months, compressed air connection: 2 bar, overall weight: 20 kg, filling weight (max.): 1,000 g, filling weight (min.): 100 g, input voltage: 220 V, pressure: 2 bar, tank capacity: 30 l, New Pneumatic Filling Machine / Filler – Plug & Play For sale: new filling machine suitable for dispensing liquids, pastes, and semi-viscous products, such as: - Disinfectants - Shampoos & lotions - Creams - Honey & jam - Milk & yoghurt - Water & alcohol - Sauces (e.g., pesto) - Etc. Cjdpfsrivwfjx Aqvohd Simple, reliable, and immediately deployable This filling machine operates on compressed air and 220V and is fully plug & play. As a result, the machine is very user-friendly and particularly suitable for filling small to medium-sized batches. A small compressor is sufficient to run the machine; one can be supplied if desired. Flexible filling (100 – 1000 ml) The machine is equipped with a 1000 ml cylinder, allowing for a maximum of 1000 ml to be filled per cycle. - Minimum fill quantity: 100 ml - Any quantity between 100 and 1000 ml can be dispensed in a single stroke - Larger volumes can easily be achieved by multiple cycles Large hopper & expansion options Standard supplied with a 30-liter stainless steel hopper. There is also the option to connect to an IBC container or 200-liter drum, enabling quick and efficient handling of larger filling volumes. Manual or automatic operation The machine offers: - Foot pedal – fill at your own pace - Automatic mode – continuous filling cycle for higher volumes Depending on the product, fill volume, and operator, approximately 15 to 25 units per minute can be filled. Compact & high-quality construction - Weight: approx. 15–20 kg - Easy to place on a table - Fully made of high-grade stainless steel - Robust, industrial build quality More information For questions, feel free to email us; we are happy to assist you with this or other machines. Additionally, we also offer a labeling machine, which is an excellent combination with this filling machine for a complete filling solution. We aim to respond within 24 hours and are available on weekdays from 09:00 to 17:30.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 8,000 kg, first registration: 01/2005, suspension: air, tire size: 245/70R17.5, color: black, Equipment: ABS, = Additional Options and Accessories = - Air suspension = Notes = Pezzaioli 3-level livestock carrier - Water & Ventilation - Lifting roof - Lifting floors Year: 2005 ZFJSBA31U4M002770 3 levels - Livestock Chjdpfx Aqo Aga Tkovjd Lifting floor Lifting roof Loading ramp Water & Ventilation = Further Information = Year of manufacture: 2005 Tire size: 245/70R17.5 Suspension: Air suspension Rear axle 1: Dual tires; Max. axle load: 8000 kg; Tire tread depth left inner: 30%; Tire tread depth left outer: 30%; Tire tread depth right inner: 30%; Tire tread depth right outer: 30% Rear axle 2: Dual tires; Max. axle load: 8000 kg; Tire tread depth left inner: 30%; Tire tread depth left outer: 30%; Tire tread depth right inner: 30%; Tire tread depth right outer: 30% Rear axle 3: Dual tires; Max. axle load: 8000 kg; Tire tread depth left inner: 30%; Tire tread depth left outer: 30%; Tire tread depth right inner: 30%; Tire tread depth right outer: 30% GVWR: 36,000 kg Technical condition: good Optical condition: good

Year of construction: 2020, condition: used, This listing is for the Waters e2695 Alliance HPLC System Chsdjy H Egvopfx Aqvjd The unit is in full working condition and ready for immediate use Designed for high-performance liquid chromatography, the Waters 2489 UV/Vis detector delivers accurate and reliable analysis. Ideal for research and quality control labs, it offers stable wavelength detection and seamless integration with HPLC systems. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Year of construction: 2020, condition: used, This listing is for the Waters e2695 Alliance HPLC System The unit is in full working condition and ready for immediate use Designed for high-performance liquid chromatography, the Waters 2489 UV/Vis detector delivers accurate and reliable analysis. Ideal for research and quality control labs, it offers stable wavelength detection and seamless integration with HPLC systems. Includes Waters e2695 Seperations Module Chjdpey H E Slofx Aqvod Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, Year of construction: 2017, x-travel 2010 mm y-travel 3010 mm z-travel 200 mm Capacity 4000 bar table load 1200 kg/m2 feed 10/5 m/min Table 3000 x 2000 mm control FANUC dimensions of the machine ca. 10,3 x 4,2 x 3,25 m used CNC water cutting machine in gantry style - high pessure pump 4000 bar Chsdpezmitksfx Aqvjd - cutting tool WJS Basic cutting head, abrasiv dosing device - CAD/CAM software IGEMS 2D CAD, 2D CAM and AWJ modul - pressure vessel 200 ltr./ abrasive tower 1 tonne - abrasive controling package - abrasive disposal package - Remote control software - collision protection package - nesting level 1 + 2

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 75 bar, total height: 2,591 mm, total width: 2,438 mm, total length: 2,991 mm, temperature: 38 °C, operating pressure: 75 bar, energy consumption: 30 kWh, DESALINATION PLANT HF-RO: ULTRAFILTRATION AND REVERSE OSMOSIS ON A SKID The HF-RO combines hollow fiber ultrafiltration with seawater reverse osmosis. The ultrafiltration removes sediments, colloids, bacteria, and viruses and feeds the reverse osmosis directly, without an intermediate tank. This allows the system to process raw water that would quickly clog a conventional reverse osmosis system with cartridge filters: nearshore seawater, harbor water, river mouths, and water with highly variable turbidity. PERFORMANCE DATA (Design for 36,000 mg/l, 25 °C) - Inlet flow: 5.0 m³/h - Permeate flow: approx. 2.06 m³/h, approximately 48 m³/day with 24-hour operation - Inlet salinity: 250 to 43,000 mg/l (sea, brackish, and river water) - Inlet temperature: +2 to +33 °C - Inlet turbidity: up to 300 NTU, sediment up to 150 mg/l - Permeate: 150 to 500 mg/l, 300 to 1,000 µS/cm, retention rate 99.6% PROCESS 1. Disc filtration: 2 automatic disc filters 2" in duplex operation, 100 µm, backflushing with filtrate and compressed air during operation 2. Hollow fiber ultrafiltration: 4 modules, outside-in, 0.01 µm (100,000 Dalton), filtrate approx. 0.2 NTU, cyclic backflushing with air, the remaining modules continue to produce 3. Reverse osmosis: low-pulsation axial piston high-pressure pump (4.08 m³/h at 63 bar, motor 8.5 kW), 4 RO modules in GRP pressure pipes, max. 65 bar, automatic pressure and flow control CLEANING - integrated CIP for ultrafiltration and reverse osmosis - cleaning tank 2 x 100 l with 7.5 kW heater - 3 pneumatic dosing pumps for cleaning agents and chlorine - programmed disinfection, long-term preservation, and re-commissioning EQUIPMENT - materials: low-pressure ABS, high-pressure 1.4539 and 1.4410 super duplex, high-pressure pump 1.4462 duplex, tanks PP, frame stainless steel - valves in only two nominal sizes, interchangeable pumps, low variety of spare parts - PLC with 15.6" touch panel, Ethernet interface for remote monitoring - control of a frequency-controlled inlet pump - control cabinet 400 V / 50 Hz, approx. 18 to 20 kW, IP65 DIMENSIONS - main skid approx. 1,400 x 1,200 x 2,020 mm (L x W x H) - RO module stand approx. 600 x 550 x 1,990 mm APPLICATIONS Drinking and utility water for coastal and island supply, resorts and camps, desalination of harbor and river mouth water, process water for industry on the coast, emergency water supply, pilot operation for larger projects. SCOPE OF DELIVERY Main skid with disc filters, ultrafiltration, high-pressure pump, CIP system and control cabinet, RO module stand with 4 modules, internal piping and wiring, documentation (P&I, layout, process description). Not included in the scope of delivery (optional): inlet pump, compressed air supply, container housing, transport, installation, commissioning, training. Chjdpfo Ahqpgox Aqved NOTE We will confirm the binding performance after you provide your water analysis. Inspection and functional testing possible before purchase. Purchase or lease-purchase. English brochure available upon request.

Condition: like new (used), Year of construction: 2026, operating hours: 40 h, functionality: fully functional, pressure: 2,500 bar, year of last overhaul: 2026, We are selling our IBAK MicroGator with a UHP high-pressure water cleaning system for main pipelines DN 200–DN 800. The robot was only used for one project and has not been used since. * Only 4 months old * Used for only 5 working days * No signs of wear – like new * Equipped for Ultra High Pressure (600–2500 bar), compatible with Falch and Hammelmann * Original price: €66,000 Chsdpfjz Aupiox Aqved * Our price: €50,000 (negotiable) The robot is currently located in the Czech Republic. However, after prior arrangement, it can also be made available in the Cham area in Bavaria. Filip Khol rohrsanierung1a.de

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1873778, pressure: 4,000 bar, overall weight: 1,055 kg, Manufacturer: Uhde High Pressure Technologies GmbH Type: HPS 4022 Year of manufacture: 2015 Motor power: 22 kW Stroke length: 182 mm Chjdpfx Aozz Achjqvsd Plunger diameter: 19 mm Maximum flow rate: 2.3 l/min at 4000 bar