Used Water Goblin for sale (7,434)

Condition: used, New: Yes Year of construction: 2020 Hodpfx Akjz S Axps Ujnu

Condition: used, Year of construction: 1994, Three-stage water degassing system for water degassing and CO2 impregnation. The raw water enters the first degassing tank through an injector nozzle. The high flow velocity causes oxygen and nitrogen to be torn out of the water jet and escape from the top of the tank. This process is repeated in the second degassing tank. In the third tank (impregnation tank), after entering through the injector nozzle, the water is mixed with the CO2 pressure in the upper part of the tank, which is under impregnation pressure. Additional title: multi-stage cold deaeration with impregnation Hnedpfx Ajxzqt Iek Uju Base construction: mounted on stainless steel frame Features: 3 containers (each with pressure gauge); 3 centrifugal pumps; control cabinet with control panel; pipes with various fittings

Condition: used, functionality: unexamined, machine/vehicle number: G&L Series SSV, Used Goulds SSV Multi-stage Booster Water Pump Manufacturer: Goulds G&L Model: G&L Series SSV 3500 RPM 1.5 HP 360 PSI Max 230°F Max Complete with original manuals Sold per unit Hnjdpfx Akjx A Ax Se Ueu

Condition: used, Year of construction: 2004, Additional title: water deaeration Capacity: 50 hl/h O2-contents after deaeration: 0,5 ppm Temperature: 16 °C Pressure: 4 bar Power: 1,0 kW Voltage: 380 V Hedpexw R Rxofx Ak Usnu Frequency: 50 Hz Operation / Control: Fully automatic / Steuerung S7 Material: Frame: 1.4301, pipes: 1.4404 Features: Water line (pneumatic flap valves, flow meter, check valve, sampling valve), membrane module (water inlet from below), CO2-line (flap valve, pressure reduction valve, flow meter, manual regulation valve) Vaccum line (Flap valve, vacuum pump (ELMO), manual regulation valve), plate heat exchanger (Thermowave), pressure boosting pump (Hilge, 4,5 bar with 250 hl/h, 7,5 kW motor)

Condition: good (used), Year of construction: 2002, Screw compressor, water-cooled, manufactured by BOGE, type: SO150, year of manufacture: 2002. Hnjdpfjh Hi Insx Ak Uou Final compression pressure: 10 bar, motor power: 110 kW. Includes refrigerant dryer. Dimensions: Length 3.5 m, width 1.5 m, height 1.7 m, weight approximately 3200 kg. Documentation available.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 12 bar, operating pressure: 12 bar, overall weight: 2,000 kg, compressed air connection: 6 bar, Equipment: documentation/manual, RIEFILT Ultrafiltration System UF 25/10 – 25 m³/h High-Performance UF for Industrial, Process & Drinking Water Compact, fully automatic ultrafiltration system for the treatment of river, well, or process water with a capacity of up to approx. 25,000 l/h. The UF 25/10 reliably removes suspended solids, bacteria, microorganisms, and colloids, providing consistently clear filtrate—ideal as a stand-alone treatment unit or as a high-quality pre-treatment stage for RO systems. Typical Applications - Process water treatment in industry and commercial sectors - Filtration of river, surface, and well water - Premium pre-filtration for reverse osmosis systems (extends RO membrane service life) - Drinking water purification for industrial, municipal, or containerized solutions - Recirculation and polishing of industrial and rinse water Wherever secure water quality, high availability, and stable operating costs are required, this system excels. Technical Specifications (Summary) Hnodpfx Akjwnbxdj Uju - System type: RIEFILT UF 25/10 - Capacity: up to approx. 25 m³/h raw water, approx. 23.5 m³/h nominal capacity - Membranes: 10 × PVDF ultrafiltration modules - Operating pressure: approx. 1–3 bar (energy-efficient low-pressure operation) - Temperature range: approx. 0–40 °C - Power consumption: approx. 12.5 kW (base), approx. 15 kW incl. CIP module - Design: Stainless steel skid, industrial-grade piping and tanks - Designed for automated continuous operation, containerized, and modularly expandable System Concept & Operation - Pre-assembled skid system—plug & play, quick integration into existing setups - Automatic backwashing and CIP cleaning for minimal downtime - Freely programmable control, user-friendly operation, and clear process visualization - Low chemical consumption, optimized membrane lifespan, robust industrial construction Benefits for the Operator - High operational reliability: stable filtrate quality even with fluctuating raw water quality - Reduced OPEX: energy-efficient operation, automated cleaning, minimal personnel requirements - Flexible integration: as a stand-alone solution or high-end pre-treatment stage for RO / further processes - Future-proof: ideal for system expansions, container concepts, rental or multi-line solutions If interested, I am happy to provide the detailed technical datasheet, layout drawings, and a customized offer tailored to your application, including pricing and delivery terms. Please contact me directly via Machineseeker for further information, project discussions, or to arrange a viewing.

Condition: used, Additional title: with automatic regeneration Nominal flow: 9800 l/h Pressure working area: 6 bar pressure class: 8,5 bar Operating temperature: 25 °C Ambient temperature: 35 °C Current: 0,35 A Hnodpjw Tbunjfx Ak Usu Voltage: 230 V Frequency: 50 Hz Weight: 390 kg Features: 2 x softening tanks (resin-filled); brine tank; valves and pipes

Condition: used, Vertical hot water tank with internal heating coil for heating with steam. Capacity approx. 30 hl. Additional title: Heatable tank Content approx.: 3000 l Width: 1400 mm Height: 2800 mm Material: stainless steel Position: free standing Base construction: Cylindrical tank on pipe feet Features: 1 tank with heating device, temperature gauge, outlet in the centre of the base, manhole at the top, overflow Hnjdsw Tdx Aepfx Ak Uou

Condition: used, Year of construction: 2014, functionality: fully functional, Water supply unit, Wilo Helix VE 1605 pump. 1 unit Wilo Helix VE 1605 vertical high-pressure centrifugal pump in inline design. Water capacity up to 30 m³/h, delivery pressure up to 86 m/water column (see attached performance curve). Motor 5.5 kW, 3 x 400 V. With electronic pump control with frequency converter for electronic speed regulation. 2 units in stock. Price per unit. Hjdowvh N Eopfx Ak Usnu

Condition: used, axle configuration: 2 axles, first registration: 03/1983, suspension: steel, tire size: 295/80r22,5, wheelbase: 4,600 mm, Year of construction: 1983, Tyre size: 295/80r22,5 Suspension: leaf suspension Axle 1: Double wheels Axle 2: Double wheels Drive: Wheel Empty weight: 5.380 kg Carrying capacity: 14.620 kg GVW: 20.000 kg Hnsdjyku Tljpfx Ak Uju

Condition: good (used), Year of construction: 2007, Single-stage reverse osmosis system. Model: R0 04-1 with EWMK40 2xRVMR1ACM Width: 880 mm Height: 1450 mm Depth: 380 mm Control cabinet dimensions: Width: 500 mm Depth: 250 mm Height: 500 mm Hnodpfxozqtp Ro Ak Uou Total weight: 120 kg Condition: good, second-hand

Condition: used, Water degassing (deareation) system for removing oxygen from drinking water, mainly built in 1995. The system operates using a two-stage cold degassing process involving counter-current stripping with CO₂ and consists of the following components: - 2 degassing vessels connected in series - Vacuum pump with separator - 70 hl holding tank (Gross, 2018) for storing degassed water at up to 4 bar overpressure. - Centrifugal pumps - CO2 dosing via needle valve - Pipe panel, various pipework, valves, fittings, measurement and control technology - Control cabinet with Simatic S5 control system Capacity: 20000 l/h Hjdoy Ti Anepfx Ak Ujnu Gross volume deareation vessels each: 285 l ; overpressure up to 1 bar Gross volume buffer tank: 7060 l ; overpressure up to 4 bar Residual oxygen content appr.: 0,010 - 0,015 mg/l Operation / Control: Simatic S5 Material: stainless steel Position: mounted on stainless steel frame with feet Features: 2 x degassing vessels; pressure tank; centrifugal pumps; vacuum pump with separator; CO₂ dosing (via needle valve); flow, pressure and level measurements; switch cabinet; pipe panel; various pipework, valves and fittings Additional title: cold degassing via CO2-Stripping

Condition: used, Oil-water separator KAESER BEKO, type Öwamat Tank diameter: 600 mm Hnjdpfx Aksy Ty Sao Uju Overall height: 1200 mm With activated carbon filter Space requirement: Ø 700 x 1200 mm Weight: approx. 30 kg In good condition.

Condition: good (used), Oil-water separation system for compressor condensate External dimensions: Hnedpfxjzh Iddo Ak Uju Diameter: 600 mm Height: 1180 mm Weight: approx. 50 kg Condition: good, second-hand

Condition: excellent (used), Offered here is a water cooler generator from the company Lennox. Hjdpeg Uv Ayofx Ak Usnu LENNOX chiller 400 V without condenser for indoor installation two cooling circuits capacity: 153 kW R 407 C low mileage dimensions H x X W x D: 1750 x 1500 x 650 mm For technical data please refer to the nameplate.

You will receive a proper invoice with VAT. The price is incl. VAT.
We have more various interesting things for sale. Please have a look at all our ads.
If you are interested or have any questions, please contact us via the message function!

Condition: used, MF welding machine with water-cooled projection welding head Medium-frequency projection welding head Manufacturer: TECNA (Italy) Model 3670 E CF00 Serial No.: Year of manufacture 2014 Rated welding power 25 kVA Max. welding power 160 kVA Mains connection 400 Volt, 50 Hz - Welding control TE750 or TE760 - Projection welding head for single-sided spot welding - Ideal for repair work in the bodywork area, ensuring the best welding quality - Water-cooled, type 2BHPLN - Mobile transport trolley Weight approx. 155 kg Very good condition - like new Hedpfx Asg U A Uzjk Usnu

Condition: used, GRUNDFOS vertical multistage high-pressure centrifugal pump Pump in like-new condition, but a part of the magnetic coupling has been removed. Type CRN 10-09 MP-FGJ GI-V Year of manufacture: approx. 2012 Flow rate at 7.2 bar: max. 10 m3/h Head: max. 91.8 meters Power supply: 400 volts, 50 Hz Power: 3 kW - Pump design with 9 stages - Made of stainless steel 1.4401 - The like-new pump was used as a source of spare parts, but several new pump chambers are included - A part of the magnetic coupling is missing Suitable for potable water supply, irrigation, and drainage Packaged in the original wooden crate Pump dimensions (L x W x H): 1100 x 250 x 300 mm Hodpfefupadox Ak Uenu Shipping crate dimensions (L x W x H): 1400 x 330 x 340 mm Weight with shipping crate: 85 kg Like new Not a submersible pump or a deep-well pump.

Condition: used, Year of construction: 2026, CW-3000 Water Chiller for CO₂ Laser Engravers and Cutting Plotters The CW-3000 is a compact water cooling system designed for CO₂ laser engravers and cutting plotters, suitable for laser tubes with a power rating of approximately up to 80 W. It maintains a stable coolant temperature, protecting the laser source against overheating and power fluctuations. It is a simple and effective solution for achieving consistent cutting and engraving quality while reducing the risk of production downtime. The unit uses an efficient fan and heat exchanger system, making it lightweight, space-saving, and easy to integrate into existing cooling installations. Why CW-3000 improves process safety and quality Protection of laser components – stable cooling reduces temperature fluctuations inside the laser tube and minimizes the risk of thermal overload of the entire system (tube, power supply, connectors, and water circulation circuit). This ensures safer and more predictable operation. Extended CO₂ laser tube lifespan – maintaining the recommended operating temperature range helps preserve output parameters for longer and delays the need for tube replacement. Improved cutting and engraving quality – stable temperature means stable laser beam power, helping achieve consistent results, cleaner edges, and fewer corrections. Continuous production operation – reduced risk of thermal alarms and cooling-related interruptions ensures a more predictable workflow. Cost-effective operation – simple construction, compact dimensions, and low power consumption make daily operation easier and help reduce maintenance costs. Applications The CW-3000 cooling system is designed for: CO₂ laser plotters and engravers used in light and medium-duty applications where repeatable quality and low operating costs are important. Advertising workshops, prototyping studios, and small production facilities where reliable cooling is required with limited installation space. Recommended operating practices Use clean coolant and regularly check the fluid level; ensure the circulation system remains unobstructed and all connections are leak-free. Provide sufficient airflow around the heat exchanger and cooling fan. Periodically clean the filter and reservoir and check the coolant flow to maintain efficiency and protect system components. Technical specifications Parameter Value Power supply 230 V Hodpji D D Rvefx Ak Uenu Current consumption 0.45 A Cooling capacity 50 W/°C Tank capacity 9 L Connections (inlet / outlet) 10 mm Maximum operating height 10 m Maximum flow rate 10 L/min Weight 9.5 kg Dimensions (L × W × H) 49 × 27 × 38 cm Please note!!! This product is a return item with visible signs of wear and dents. No warranty included.

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Power source serial no.: 9885186 Cooling unit serial no.: 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling Hsdpfxjt Awm Do Ak Uonu - 44,895 operating hours (read) - Operating and maintenance manual included Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Sold without accessories The price refers to a set consisting of 1x power source and 1x water cooler.

Condition: like new (used), Year of construction: 2022, operating hours: 90 h, MAXIEM 1530 Demonstration machine Year of manufacture: 2022 Pump working hours: 90h Equipment: • M30 pump with 30HP (22kW) power; Hsdpetq Emxefx Ak Ujnu • Worktable with a head operating range of 3048mm x 1575mm; • Control computer with Windows 10 and software; • Cutting head integrated with diamond flange; • 300kg abrasive feeder.

Year of construction: 2013, condition: used, Water degassing module. Suitable for integration into existing control systems. Additional title: cold degassing Capacity: 50 hl/h Residual oxygen content: 0,03 mg/l Column volume approx.: 300 l Operating temperature: 95 °C Operation / Control: PLC / visualization by customer Material: Stainless steel 1.4301 Hnodpfx Asvcqqtsk Usu Base construction: Height-adjustable feet Features: Two-chamber column; water pump; panel

Condition: new, Year of construction: 2024, machine/vehicle number: 5.3495.0, Kaeser Oil/water separator Type: Aquamat CF 6 Tested and certified condensate treatment The AQUAMAT treatment system enables the compressor operator to carry out condensate treatment in-house, thereby greatly reducing the amount remaining for disposal. An AQUAMAT can save approximately 90% of the costs associated with arranging for the full volume of condensate to be treated and disposed of by a specialist contractor, therefore the initial investment is very quickly recovered. Technical data Suitable for max. compressor delivery volume 3.8 m³/min (using: Sigma Fluid MOL or S 460; for Kaeser rotary screw compressors in climate zone 2*) Receiver volume 18.6 l Fill volume 11.7 l Condensate inlet connection 2 x G 1/2 Water drainage connection (hose diameter) DN 10 Net weight approx. 5.8 kg Permissible condensate temperature +5 to +60 °C Dimensions (W x D x H) 387 x 254 x 595 mm Specifications subject to change without notice. Hsdpov Ta D Dofx Ak Ujnu Factors such as compressor type and oil type must be taken into consideration when selecting AQUAMAT condensate treatment systems.

Condition: used, Rittal air/water heat exchanger for the climate control of control cabinets and automation technology. Manufacturer: Rittal Series: TopTherm Type: SK 3210100 Device type: Air/water heat exchanger Condition: used Supply voltage: 230 V AC Frequency: 50/60 Hz Phases: 1~ Rated current: 0.44 A at 50 Hz Rated current: 0.50 A at 60 Hz Hsdszdafmepfx Ak Ujnu Power consumption: 0.100 kW at 50 Hz Power consumption: 0.120 kW at 60 Hz Useful cooling capacity: 4.00 kW Measuring point for cooling capacity: L35 / W10 Flow rate of cooling medium: 400 l/h Operating temperature range: 1 °C to 70 °C Cooling medium: Water Maximum cooling medium temperature: 30 °C Operating pressure: 0.1 to 1.0 MPa Operating pressure: 14.5 to 145 psi Protection class: IP55 Weight: 25.5 kg Location: Kusel

Condition: used, Item: D-3309-Grundfos pump Grundfos Centrifugal Pump – Type CP3-60 Used high-quality Grundfos centrifugal pump, made in Denmark. Compact, reliable unit suitable for industrial, food industry, and CIP applications. Technical details: Manufacturer: Grundfos (Denmark) Type: CP3-60 Model: B91-25756 Speed: 2900 rpm (50 Hz) Capacity: approx. 3 m³/h Head: approx. 52 m Power: approx. 1.2–1.4 kW Material: Stainless steel (depending on configuration) Condition: Used, in good working order Applications: Hnjdpoxt Itvofx Ak Uou Ideal for CIP return, clean water, cooling circuits, filtration systems, or other industrial processes that require stable pressure and moderate flow rates. Location: Denmark Price: On request

Condition: used, Stainless Steel Heat Exchanger AGETHERMA Type FT-1.1-910/230/10-RS04-T10-ATWH Air-to-water, Air-to-oil Heat Exchanger Serial No. WT08-1065P-2 Year of Manufacture: 2008 Completely made of stainless steel (presumably 1.4571) Gas/air flow: 900 x 230 mm External connection flange: 1000 x 310 mm Max. permissible pressure: 10 bar Max. permissible temperature: 300 °C Volume: 27 liters Test pressure: 17.9 bar Net weight: 325 kg Manufacturer test date Flange size: Ø DN25 DIN 2635 PN 40 (2 pieces) - Tubes are stainless steel with aluminum fins for improved heat transfer Hnodpsy Dvguofx Ak Uju Available as optional accessories (at extra cost): 3 units heat exchangers with identical technical data and 27 liter capacity (weight per unit: 325 kg) 1 unit heat exchanger with identical technical data and 17 liter capacity (weight: 200 kg) 2x 90° bends with flange connection, made of stainless steel 2x adapters from rectangular flange to round pipe Ø 210 mm, made of stainless steel Price stated per heat exchanger The pictures show all 4 heat exchangers as one unit placed on a pallet. Total weight of all parts approx. 1,400 kg Sale of all heat exchangers as a package: 4,000 EUR