Used Weinig Profimat 23 E for sale (468)

Condition: good (used), Year of construction: 1989, Grinding machine for profiled and straight knives. Very good condition, low hours of use. Hfodpfx Aexuzqdod Dop

Condition: used, Tenoning spindle 1 St Number of milling agregates 4 St. Hfjdsxpi Dujpfx Ad Dsp Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled ----- The machine was factory overhauled by Weinig in 2024. The control system was also upgraded to a Siemens S 7 677 C, with a new membrane panel "Touch". With the following machining units: Crosscut saw ----- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ----- Axially adjustable with crosscut saw Tenon and slotting spindle ----- Motor power 15 kW Spindle diameter 50 mm Spindle speed 2,925 rpm Tool travel radius min. 380, max. 400 mm Tool clamping length 640 mm Axially adjustable CNC axis Axially adjustable travel 580 mm Adjustment speed 100 mm/sec. 1. Profile spindle (up- and down-rotation) ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis 2. Profile spindle ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis Profile milling unit horizontally mounted on top ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 9,000 rpm Pneumatically adjustable to 8 axial and radial positions Profile milling unit vertically mounted on the right side Machine end ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 5,850 rpm Pneumatic adjustment to 8 axial and radial positions Additional accessories ----- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, including a positioned cross-cutting saw integrated into the control system. Studio window device, pivots 60° on both sides Double-part package with automatic separation and transfer Synchronization device with automatic window rebating Rebating carriage for rebating small sash widths Air conditioning unit in the control cabinet PC control NEXUS Automatic turning system Slat conveyor, including conveyor belt for returning the workpieces to the operator (Technical specifications according to the manufacturer - without guarantee).

Condition: excellent (used), Weinig LTB250/3500G belt lifter Length 3500mm Hfsdpfx Adsu Eclre Dep Width 250mm Speed 22m/min

Condition: used, Weinig Unimat 23 E + Uniplan 23 planing line, including a return conveyor. An NC-controlled line for planing and profiling window scantlings, including glazing bead removal or other planing tasks, with automatic workpiece return to the operator. spindles: 4 + 2 working width: 230 mm working height: 120 mm spindle 1: 7.5 kW / 50 mm / 8,000 rpm spindle 2: 11 kW / 50 mm / 8,000 rpm spindle 3: Common motor with spindle 2 / 50 mm / 8,000 rpm Hfedpfxexnlhys Ad Dsp spindle 4: 7.5 kW / 50 mm / 8,000 rpm Spindle 1 Uniplan: 5.5 kW / 50 mm / 7,200 rpm Spindle 2 Uniplan: 5.5 kW / 50 mm / 7,200 rpm feed: 5-24 m/min service: PC Control Nexus NC axes: Unimat 2 & 3, Uniplan 1

Condition: good (used), Feed speed 10-40 m/min Distance: roller fence to sawline 230 mm Hfodpsxhfx Ssfx Ad Djp Distance: feed rollers to sawline 159mm Distance between saws 5mm to 180mm Saw blade dimensions 6050 x 100 x 1.06 mm to max 1,24mm Saw blade speed 35 m/sec Saw wheel diameter 915 mm Saw motor power 2 x 15 kW Feed motor power 1,1 kW with inverter. Saw blade lubrication tank 2 x 6l Voltage 400 volts 50 Hz Weight approx. 6000 kg

Condition: good (used), Year of construction: 2008, Raimann FlexiRip 4200 rip saw - German production, user manual - year of production 2008 - automatic material collection Hfodohzg Agepfx Ad Dep TECHNICAL PARAMETERS: cutting length max. 4200 mm cutting width max. 600 mm cutting height max. 130 mm feed continuously adjustable up to 80 m / min main engine power 11 kW disc diameter max. / min. 600 mm / 400 mm 100 dimensions can be programmed line laser two-stage blade feed touch panel control stub diameter 2 x 160 mm dimensions of the machine (length / width / height) 620/160/220 cm weight 2250 kg

Condition: excellent (used), functionality: fully functional, Heavy-duty Raimann multi-blade saw. Chain bed width 500 mm. Usable clamping length of saw sleeves 570 mm Cutting height 120 mm. Powered top rollers. Electric pressure beam adjustment. Spiked chain. Counter bearing. Stepless hydraulic feed from 0 - 50 m/min. Drive motor 75 kW with pneumatic tensioning station. Hjdoxtwv Hjpfx Ad Djfp 2 saw sleeves. Safety devices. Electrical control cabinet. Etc. Some new parts installed.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Unicontrol 12 Consisting of: Cut-off unit (item A), Tenon and slotted spindle (item C), Transfer belt (Pos. I), profiling spindle (Pos L), profiling spindle (Pos. N), Profile shaving unit vertical right (Pos. P) For the production of individual parts and elements in frame-by-frame or serial production. Consisting of a cross processing unit and a longitudinal processing unit connected to a transfer belt. Working width 40-140mm (See pressure ruler left 40 - 140 mm) Hsdpfoumci Sox Ad Dofp Working height 40-120mm Workpiece length min. approx. 275 mm + 1 x end profile length Long machining: approx. 220 mm + 2 x end profile length Workpiece length max. 3500 mm The part dimensions depend on the machine equipment, production type and tool assignment. A final definition of the part dimensions is only possible after receipt, inspection and approval of the complete and final layout drawings. Cross machining: Table feed Motor power 0.3 kW (0.4 HP) Pre-set feed speed for cutting, profiling and return 3-25 m/min Vario table with (studio window production possible) The clamping length of all tenoning and slotting spindles can be used without a tool blank. Workpiece clamping by means of a clamping bridge. Operated by a clamping cylinder installed under the table. NC-controlled long fence mounted on the slotting table. Studio window device Swivel angle max. +/- 75° The minimum workpiece length for slanted windows depends on the angle and the width of the wood. Possible part dimensions for slanted window production Angle Max. Min. Working width Workpiece length +/-75° 80 mm 800 mm +/-70° 120 mm 490 mm +/-60° 240 mm 360 mm +/-90° 350 mm 185 mm For angles greater than 60° only counter processing Commission not documented 1)NC automatic angle adjustment for machining angled parts Splinter protection by means of overtravel counter Over the entire spindle length of the tenoning and slotting spindle for 90° machining Manually trackable counter-rail for angled part machining 2) Additional counter-rails

Condition: used, Year of construction: 1969, Used machine Year of manufacture: 1969 Hedpfx Adoxavtqe Defp Runs perfectly Max. working width: 170 mm Max. working height: 130 mm 1st shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5th shaft: top Availability: short-term Storage location: Röllbach

Condition: good (used), Year of construction: 1996, functionality: unexamined, shaft diameter: 50 mm, power: 77.5 kW (105.37 HP), High-performance planing and profiling machines / four-sided planer Manufacturer: Weinig Model: Hydromat 30 / H 30 N System originates from a parquet factory Planing width: approx. 220 mm Planing height: approx. 120 mm Spindle arrangement: Hodpexr Hbvofx Ad Dsfp Bottom (joiner), 22 kW Right, 7.5 kW Left, 18 kW Top, 30 kW Spindle diameter: 50 mm Feed speed adjustable, 12 – 120 m/min. Voltage: 380 V, 50 Hz

Condition: excellent (used), Year of construction: 2012, Weinig E3 infeed and A3 outfeed E3 Infeed Scissors lift before crossfeed. Crossfeed table to infeed accelerator. Moulder infeed accelerator. Hodpextwm Esfx Ad Djfp A3 Outfeed Drop leaf. Crossfeed belt conveyor. Scissors lift with pack chains. pack outfeed chains.

Condition: used, Lot of machines for a compact planing mill consisting of: * Weinig Powermat 700 four-side planer, model year 2022 * Spänex SHB 250 briquetting press, model year 2019 * Jrion HFS-170/15-SA rip-cutting circular saw * StraPack RQ-8S bundling machine * Hema UH 800 TR band saw * Spänex filter tower extraction system and Höcker Polytechnik fan The system is still in operation and can be inspected with power on at any time. Available by arrangement from March 2026. Further information upon request. Individual sales possible by arrangement. Hjdpfx Aoxmh U Hjd Dsfp

Condition: excellent (used), functionality: fully functional, Heavy-duty Raimann multi-blade saw. Hfsdpfx Aextwvtjd Dop Chain bed width 500 mm. Usable clamping length of saw sleeves 570 mm Cutting height 120 mm. Powered top rollers. Electric pressure beam adjustment. Spiked chain. Counter bearing. Stepless hydraulic feed from 0 - 50 m/min. Drive motor 75 kW with pneumatic tensioning station. 2 saw sleeves. Safety devices. Electrical control cabinet. Etc. Some new parts installed.

Condition: like new (used), functionality: fully functional, Hydraulic feed to the Weinig Hydromat. Feed speed 8-60m/min Hfedsv Er Ufepfx Ad Dsp

Condition: used, Year of construction: 2004, Planer and moulder Weinig Powermat 2000 PowerLock - Hodpfounbrbox Ad Djfp Technical data Working width 30 - 300 mm Working height 19 - 200 mm First lower tool holder Motor with brake 18.5 KW Speed 8000 rpm Tool flight circle 125 - 180 2nd tool holder First right tool holder Motor with brake 15 KW Tool flight circle 93 - 200 3rd tool holder First left-hand tool holder Motor with brake 15 KW Tool flight circle 93 - 200 mm 4th tool holder First upper tool holder Motor with brake 37 KW Tool flight circle 93 - 200 5th tool holder Second lower tool holder Motor with brake 22 KW PowerLock tool holder Speed 8000 rpm Tool flight circle 93 - 225 Feed system Frequency-controlled feed, infinitely variable 6 - 36 m/min.

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. Hedsxtwmropfx Ad Dofp 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed.

Condition: used, Extension rings, spacer rings with an inner diameter of 40 mm. Image similar Available sets: 5 Price per set: €30.00 + VAT Inner diameter (d): 40 mm Hfsdpfx Adoxmh T Ao Dsp Outer diameter (D): 60 mm Widths each: 25/10/10/8/8/5 mm

Condition: repair required (used), Year of construction: 2010, functionality: not functional, feed rate X-axis: 120 m/min, input frequency: 50 Hz, For sale is a Weinig mechanization system consisting of: Weinig 811, Weinig 820, Weinig 814, Weinig 811, Weinig 806 Hodpfxjv Skayj Ad Defp

Condition: excellent (used), Year of construction: 2010, Weinig Powermat 500 (6 spindle + Universal) CNC position adjustment. 4798 work hours Machine number 114015 (2010) 160mm x 230mm. All 7 spindles Powerlock, 8,000 RPM Bottom 7.5 kW Right 11 kW Left 11 kW Top 15 kW Top 15 kW Bottom 7.5 kW Universal 7.5 kW 5,2kW feed motor 30m/min feed speed. 2m infeeed table. Hfodpoxtwmfsfx Ad Dop CNC positioning on spindles 2,3, 4, 5, and 7. 3 way CNC positioning on the universal spindle. Powercom Plus. Possible to supply with automatic infeed and outfeed if needed. Possible to supply with complete handling solution with stacker if needed.

Condition: used, 10 spacer rings with an inner diameter of 40 mm and a width of 10 mm. Image similar Available sets: 2 Price per set: €35.00 + VAT Inner diameter (d): 40 mm Outer diameter (D): 60 mm width: 10 mm Hfodpjxmh Rhefx Ad Dsp

Condition: used, functionality: fully functional, spindle diameter: 40 mm, Spindle for thickness planer Hsdpfst Uvz Rex Ad Dofp

Condition: good (used), Weinig Hydromat H23 8 spindle Hfsdpfxextwl Ue Ad Dep 50mm spindles 6,000 RPM Bottom 7.5kW jointer ready Right 7.5kW straight jointer ready Left 15kW straight and profile jointer ready Right 11kW profile jointer ready Top 15kW jointer ready Bottom 18.5kw jointer ready Top 11kw straight and profile jointer ready + outboard bearing Bottom 7.5 kw straight and profile jointer ready + outboard bearing 7.5kW feed motor. Automatic lubrication system. Full heavy duty sound enclosure Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder Hsdpfx Adoxtwlzo Defp Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included. Possible to supply with Weinig mechanisation if needed (Year 2012)

Condition: good (used), Feed speed 10-80 m/min Saw wheel diameter 1050 mm Bandsaw width 130mm Saw motor power 2 x 30 kW Hydraulic feed with centering. 7.5kW hydraulic pump Hfjdpfjxtbk Ijx Ad Dop Saw blade lubrication tank 2 x 6l Voltage 400 volts 50 Hz Weight approx. 10,000 kg

Condition: good (used), 6 Head Multi-head Horizontal Bandsaw Saw pulley diameter: 915mm Sawblade width (max): 100mm Standard saw speed 35m/s Hfedpfextbkhox Ad Dop Timber width Max: 305mm – 450mm Maximum opening saw to chain bed: 305mm Feed chains to saw lines 292mm Main motor: 6x 18.5kw Feed speeds (variable): 15 – 60m/min std, 7.5 – 30m/min (optional) Type of feed: internal overhead feed system with driven chains synchronised with chain bed Operators control station including speed control and start stop controls Working height 800mm