Used Welding Dust Extraction for sale (11,403)

Condition: used, suction capacity: 1,600 m³/h, negative pressure: 2,800 Pa, Mobile station welding fume extractor, dust extractor , filter ESTA SRF K-15 FM Fan of 2.2 Kw (three-phase) located on the clean side Extraction arm with a range of 3 m Capacity 1600 m3/h Vacuum pressure 2800 Pa Possibility to connect a second extraction arm( inlet 2 x 140mm) SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It is an excellent solution to the problem of welding fumes and other dust contaminants. Welding or soldering fumes are filtered with a filtration efficiency of 99.9%. The high airflow rate can even pull out large clouds of smoke. Automatic filter cleaning manually activated - after finishing work, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotary nozzle, which significantly extends the life of the cartridge. During welding, the device does not need to be connected to the compressed air network and thus remains mobile. Dcedpfxotpui Io Ab Usf

Condition: used, Extraction system, central extraction system, room air filter system ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of construction approx. 2005 Volume flow approx. 5000 m³/h Extraction connection at filter inlet 1200 x 150 mm Exhaust air connection at filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 Volt, 50 Hz - Control cabinet for wall mounting - Pocket filter - Maintenance flap for filter change - Radial fan on top of the unit Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Weight approx. 2000 kg Dcodpfxoicic Ho Ab Ujf Very good condition

Condition: used, Welding fume extraction unit for wall mounting, KEMPER extraction device Type 85400 Serial number: 279092 Year of manufacture: 1997 Volume flow: 1700 m3/h Static pressure: 2000 Pa Extraction connection: Ø 250 mm Motor power: 1.5 kW Power supply: 400 Volts, 50 Hz Dcjdpfxou S Tfgj Ab Uof - Radial fan - Designed for a mechanical air filter with approx. 99% separation efficiency - Main filter defective (surcharge for new main filter: EUR 195 net) - Articulated extraction arm Ø 150 mm, approx. 2 meters long - Extraction pipe with 3 joints and extraction hood (adapter connection to filter housing missing) - No external control unit, without filter monitoring, without start switch - Air outlet: 250 x 140 mm Required space (L x W x H): 680 x 660 x 1100 mm Weight: approx. 120 kg Good condition Surcharge for new main filter: EUR 195 net

Condition: excellent (used), Year of construction: 2012, Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. The device is equipped with a pre-separator and a mechanical spark trap. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: Donaldson Torit Model: DFPRO 12-CYCLO Year of production - 2012 Donaldson Torit Ultra WEB patron filter cartridges - 12 pcs. Filtration area of 215 m2 18.5 Kw fans. Capacity 11000 m3/h Vacuum 3900 Pa Inlet diameter - 500 mm We also offer on request new filter cartridges tailored according to the purpose of the device. Dimensions: height - 5.00 m length. - 3.50 m Dedpfeiypxijx Ab Uecf width - 1.70 m weight - 2200 kg

Condition: used, Year of construction: 1993, suction capacity: 1,500 m³/h, negative pressure: 3,600 Pa, Dust extractor,welding fume extractor by Herding. Self-cleaning, pneumatic filter for plasma, laser, sandblasting, sodding, grinding plaster, cement, plastic and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. High-quality filter cartridges of HSL type are made of sintered polyethylene with the possibility of cleaning have several times longer service life compared to ordinary cartridges. As standard, the coating is made of PTFE, which in combination with the body material (PE) provides a very high chemical durability. Dsdpfx Abetq Ufvo Ujcf 4 Kw fan Capacity - 1500 m3/h Filtration area - 38 m2 Control cabinet Inlet diameter - 180 mm Mag. no: 0848/2

Condition: used, Year of construction: 2005, power: 5.5 kW (7.48 HP), volume flow: 4,400 m³/h, intake manifold diameter: 250 mm, total height: 2,600 mm, total length: 3,500 mm, total width: 1,600 mm, overall weight: 800 kg, Equipment: CE marking, No. 04523 Mobile extraction unit / mobile dust extractor Schuko Vacomat 250 Used, year of construction 2005 Nominal volume flow 4400 m3/h Minimum volume flow 3533 m3/h Negative pressure 2850 Pa Suction nozzle diameter 250 mm Dodpfjyl Nc Dex Ab Ujcf Motor power 5.5 kW Nominal speed 2880 rpm Automatic or manual operation Approved for installation in workrooms Residual dust content level H3, 0.1 mg/m3 Type B1, Suitable for extracting combustible dusts in zone 22 Filter bags made of antistatic polyester needle felt Pneumatic filter regeneration, automatic or manual Automatic extinguishing device with powder extinguisher GS-tested CE-compliant Including electrical connection cable with 32 A plug Transport dimensions approx. 3500 x 1600 x 2600 mm LWH Weight approx. 800 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2021, overall weight: 200 kg, input voltage: 400 V, total width: 800 mm, total length: 1,350 mm, total height: 1,500 mm, volume flow: 216 m³/h, space requirement height: 1,500 mm, space requirement width: 800 mm, space requirement length: 1,350 mm, filter area: 2 m², negative pressure: 31,500 Pa, power: 3 kW (4.08 HP), transport height: 1,500 mm, transport length: 1,350 mm, transport width: 800 mm, tank capacity: 80 l, No. 04520 Mobile extraction unit / mobile dust extractor ESTA WHISPERSOG 3.0 FM Unused, year of construction 2021, in new condition Industrial vacuum cleaner for cleaning work and machine extraction The WHISPERSOG high vacuum cleaners work more quietly than conventional industrial vacuum cleaners with the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction on machines. By using permanent filter cartridges, operating costs can be significantly reduced compared to disposable filters. The dust produced can be easily disposed of using the patented tipping device. Areas of application: Removal of coarse, fine and free-flowing dust during cleaning work / Direct extraction of machines in continuous operation Motor power 3 kW Electrical connection 400 V Maximum negative pressure 31500 Pa Maximum air volume flow 216 m3/h Extraction nozzle diameter 50 mm Filter surface 2m2 Dust collection container 80 liters Potential-free contact for automatic activation when machine is started Including electrical connection cable with 16 A plug, 10 waste bags and technical documentation Transport dimensions approx. 1350 x 800 x 1500 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Dsdpeylb Ixsfx Ab Ujcf Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Year of construction: 2012, condition: good (used), functionality: fully functional, For sale is a CFT compact filter technic top-mounted dust extraction system, type HKAF 12-30 The system is fully functional and ready for use immediately after connection All documentation for the system available thanks to CFT Digital Contact details can be passed on after purchase. Technical data: Year of construction: 2012 Length: 2476 mm Width: 1277 mm Height: 2330 mm Weight: 600 kg Exhaust air flow rate: 28 m3/min Filter elements: 12 pieces Filter area: 30 m² Filter material PMB 600*500 Shock valves: 4 pieces Rotary cycle control unit: 12 cycles Compressed air parameters: 4.5 bar Loading & or shipping possible for an additional charge Prices plus VAT Dcsdpfx Ajrfcpmeb Ujf Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2003, RIBO BE-AL-F1 dust extraction , water extraction vacuum filter, separator for grinding , polishing , cutting , brushing , deburring , aluminum and metals wet. Extraction made of stainless steel. The vacuum fan is located behind the filter on the clean side, which reduces the risk of explosion initiation to a minimum. Dcodpfstpwrqsx Ab Ujf Ideal filter for extracting and filtering hot and flammable or highly hygroscopic dusts that do not allow the use of traditional cartridge or bag filters, guaranteeing reduced maintenance costs. Recommended for use in mechanical workshops, it is ideal for grinding, brushing and metal polishing departments. Eex 1.85 Kw fan Capacity 1600 m3/h Vacuum of 2500 Pa

Condition: good (used), Mobile station welding fume extractor.dust extractor,filter ESTA SRF K-10 Fan of 1.3 Kw (230V) located on the clean side. Extraction arm with a range of 2 m. Dodelqw Igopfx Ab Uecf Capacity 950 m3/h. Vacuum pressure of 2800 Pa. The SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It is an excellent solution to the problem of welding fumes and other dust pollution. Welding or soldering fumes are filtered with a filtration efficiency of 99.9%. The high airflow rate can even pull out large clouds of smoke. Automatic filter cleaning manually activated - after finishing work, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotary nozzle, which significantly extends the life of the cartridge. During welding, the device does not need to be connected to the compressed air network and thus remains mobile.

Year of construction: 1996, condition: used, Dust extraction,welding fume extractor,self-cleaning filter,cartridge filter for plasma,laser,sandblasting,shotblasting The filter is cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Dcjdpeif Rluofx Ab Uof Brand: STURM Model: 3-7x20/140 DLR P Year of production 1996 Engine power 7.5 Kw Capacity 4200 m3/h Inlet diameter - 200 mm Cartridge filter cartridges - 7 pieces. Filtration area 140 m2 Complete with electrical diagram and partial piping

Condition: used, Year of construction: 2021, overall weight: 200 kg, input voltage: 400 V, total width: 800 mm, total length: 1,300 mm, total height: 1,600 mm, volume flow: 216 m³/h, space requirement height: 1,600 mm, space requirement width: 800 mm, space requirement length: 1,300 mm, filter area: 2 m², negative pressure: 31,500 Pa, power: 3 kW (4.08 HP), transport height: 1,600 mm, transport length: 1,300 mm, transport width: 800 mm, tank capacity: 80 l, No. 04519 Mobile extraction unit / mobile dust extractor ESTA WHISPERSOG 3.0 FM Dsdpeyibg Tjfx Ab Ujcf Unused, year of construction 2021, in new condition Industrial vacuum cleaner for cleaning work and machine extraction The WHISPERSOG high vacuum cleaners work more quietly than conventional industrial vacuum cleaners with the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction on machines. By using permanent filter cartridges, operating costs can be significantly reduced compared to disposable filters. The dust produced can be easily disposed of using the patented tipping device. Areas of application: Removal of coarse, fine and free-flowing dust during cleaning work / Direct extraction of machines in continuous operation Motor power 3 kW Electrical connection 400 V Maximum negative pressure 31500 Pa Maximum air volume flow 216 m3/h Extraction nozzle diameter 50 mm Filter surface 2m2 Dust collection container 80 liters Potential-free contact for automatic activation when machine is started Including electrical connection cable with 16 A plug, 10 waste bags and technical documentation Transport dimensions approx. 1300 x 800 x 1600 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Dedpfxsrhidmj Ab Uocf Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: used, Year of construction: 1988, Welding fume extractor Fabr.ESTA Type:SRF - 2000 Year 1988 Dcodpfju Hlppjx Ab Uof Ready for use.

Condition: excellent (used), Dust extraction Walther NOVA 2000 with 2 extraction arms mobile on rollers 2 pieces available Dedpjivta Njfx Ab Uscf Very good condition ready for use!!!

Condition: excellent (used), Extraction dust removal Nedermann type 663 with 2 suction arms Dcjdpfxeiyyxcs Ab Usf Very good condition, directly from production!!!

Condition: used, Year of construction: 2012, type of input current: three-phase, filter area: 62 m², suction capacity: 2,500 m³/h, negative pressure: 9,000 Pa, Dust extractor, welding fume extractor, self-cleaning pneumatic filter, vacuum dust collector, absorber for plasma, laser, sandblasting, and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. Large filtration area requiring minimal space. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters, it causes minimal pressure loss. Short bursts of compressed air during the filtration process provide effective filter cleaning. Fan power: 7.5 kW Capacity: 2,500 m³/h at a pressure of up to 9,000 Pa Filter cartridges: 11 pcs Filtration surface: 62 m² Djdpjxrpmzsfx Ab Uscf The device is equipped with an automatic system for impregnating cartridge filters. The extractor is designed for special applications where the filtered fumes and dust may be moist and sticky. Adding impregnating agent captures moisture from the fume, protecting the filters from clogging. In this case, the lifespan of the cartridge filters is increased. Stock number: 0981

Condition: ready for operation (used), Euromate MFS UltraFlex Mobile Extraction Unit Mobile Filter Welding Fume Extraction Airflow: approx. 800 – 1,500 m³/h Dsdpfsymlc Nox Ab Uocf Arm length: 4m Pipe diameter: Ø203mm You are welcome to arrange a viewing appointment. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued. A valid VAT ID number is required. Subject to prior sale. Visit our shop and check out our other offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the item description may occur and are subject to change.

Year of construction: 1998, condition: good (used), Sawdust extractor,dust extractor,self-cleaning filter,vacuum ALKO ECO JET Filter cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Ideally suited for all kinds of dry dust in various technological processes. It is possible to replace the filter bags according to the requirements and purpose. Year of manufacture 1998 5.5 Kw fan located on the clean side which reduces the risk of explosion initiation to a minimum Inlet diameter 250 mm Capacity 4320 m3/h Filtration area 29 m2 Vacuum 3700 Pa Extinguishing system "fireman" Air return ATEX flap flap Dodpfx Abeiu Hq Do Ujcf noise damper Extinguishing system *firefighter*. Control cabinet with automation to run 8 machines Technical documentation Dimensions of Extraction: Height - 3.05 m Base width - 2.75 m x 1.00 m

Condition: like new (used), functionality: fully functional, Equipment: type plate available, Dust Hog Duster SG 801-100 dust extraction system in mint condition. The system was only used once for a test run; otherwise, it is unused and in excellent condition. Power: 1.5 kW Flow rate: max. 800 m³/h Pressure: 1,940 Pa Pneumatic filter cleaning Connection diameter: 200 mm Djdpjv Iyybofx Ab Uocf Shipping available for €120. #8095

Condition: excellent (used), Aerosol extraction and filtration Manufacturer: United Air Specialists Type: Mena 2000 Com. 13051 P: 1.5 kW Vmax: nom. 1700 m³/h pg: 1500 Pa Dsdjx Rp Eqepfx Ab Uecf U: 400 V F: 50 Hz I: 3.3 A tmax: 65°C Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: new, Year of construction: 2026, The radial turbine is placed in a negative pressure cabin on the clean air side in special sound-absorbing cabins. The new generation reinforced turbine and large filtration field operate more efficiently and effectively, and also contribute to saving electricity. Advantages The DCV 7500 extractor is another milestone in the production of efficient sawdust and dust extractors, the aim of which is to constantly ensure the same extraction parameters during the entire work cycle. a durable, massive construction guaranteeing quiet and vibration-free operation of the extractor failure-free operation confirmed by production plants dealing with large orders every day takes up little space and yet can extract large amounts of dust and chips a metal suction nozzle with a large diameter of 280 mm ensures excellent air flow a strong and quiet fan guaranteeing high negative pressure efficiency! have a special blade design, which makes them more efficient and effective, and also contributes to saving electricity very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season large filter surface possibility of building a ceiling system and connecting several machines working simultaneously with DCV 7500E extractors quick replacement of foil waste bags designed in such a way as to maintain 99.99% airtightness of the system, low noise and high efficiency are ensured by a metal balanced rotor ensures perfection and cleanliness at the workplace, which directly translates into the quality of your products works perfectly with machines such as: grinders, edge banding machines, panel saws, etc. We guarantee high quality cleaning!!! the polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used It is prohibited to use this extractor in an explosive atmosphere The extractor is used for work in the carpentry industry with sawdust, shavings, dust (it is not adapted to work with wet raw materials, e.g. wet sawdust) Technical parameters CONTINUOUS OPERATION MOTOR POWER S1 5.5 kW / 400 V, 50 Hz SPEED 2900 rpm SUCTION CAPACITY 7500 m3/h SUCTION PORT DIAMETER 280 mm Dsdpfovzqtxjx Ab Uocf SUCTION SPEED 28-32 m/s FILTER SURFACE AREA 18 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 35 DIMENSIONS 1040 x 625 x 2150 mm WEIGHT 306 kg Manufacturer: Cormak

Condition: new, Year of construction: 2025, functionality: fully functional, suction capacity: 1,100 m³/h, Welding Fume Extraction, Dust Extraction, Self-Cleaning, Pneumatic with Vacuum Filter. This unit is designed for the extraction and purification of dry dust generated during welding, grinding, polishing, casting, and cutting of metals and plastics. It features a three-stage filtration system with integrated primary filter element regeneration. Contaminated air passes through a metal pre-filter (spark arrestor), a main filter cartridge, and a discharge filter made from activated carbon-impregnated fleece. The regeneration of the main filter element, which utilizes compressed air to clean the filter cartridge from accumulated contaminants, is equipped with its own 10-liter compressed air tank. The unit is recommended for applications requiring continuous extraction and filtration of airborne pollutants. Extraction arms with a reach of 3 or 4 meters are recommended as accessories. The illustrated EC model is characterized by the following features: - Fan with brushless EC motor and 0.78 kW inverter, sound-insulated - Advanced next-generation EC motor design – ensures energy efficiency, precise speed control, and quiet operation - Reliable induction motor – robust and reliable solution that guarantees high performance and trouble-free operation even under demanding conditions Maximum Capacity: 1,100 m³/h Automatic filter cartridge cleaning Self-supporting extraction arm (L = 3.0 m, d = 160 mm, hood diameter 315 mm) Three filtration stages: • Coarse pre-filter (30% metal content, G2) • Main cartridge filter with 99% separation efficiency for particles ≥ 0.5 µm • Coarse final filter (70% activated carbon, G4) PTFE membrane filter (filter class F9) Coarse dust container below pre-filter Grid and dust container below main filter Welded steel enclosure with powder coating Noise level: 64 dB(A) Dcsdpfx Aonabuzsb Usf Various configurations available to meet customer requirements. Applications: - Welding shops - Metalworking industry - Grinding and polishing stations - Plastics processing and machining This unit is ideal for environments that require constant and effective filtration of dry dust from the air. Made in Poland. The listed price applies to the model shown. Machine warranty: 12 months

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: Radial fan type DG 63 b -Motor: Dietz 0.125 kW 2845 rpm -Volume flow: 6 m³/min / 360 m³/h -Connection: inlet Ø 58 mm -Connection: output Ø 75 mm -Dimensions: 380/250/H360 mm -Weight: 9.2 kg Dedpfx Abot Rbhzo Uocf

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, welding fume filter, welding fume extraction, flue gas extraction fan, extraction filter system -Manufacturer:Oelde, extraction system, extraction filter system, type size 16 -Air flow: 22 m³/min -Engine: 1.85 kW -Speed: 2890 rpm -Individual components/technical data: see photos -Dimensions: 870/480/H1250 mm -Weight: 100 kg Djdperyaliofx Ab Ujcf