Used Welding Fume Extraction Systems for sale (42,079)

Year of construction: 1996, condition: used, Dust extraction,welding fume extractor,self-cleaning filter,cartridge filter for plasma,laser,sandblasting,shotblasting The filter is cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: STURM Njdpfeif Rlusx Afzekt Model: 3-7x20/140 DLR P Year of production 1996 Engine power 7.5 Kw Capacity 4200 m3/h Inlet diameter - 200 mm Cartridge filter cartridges - 7 pieces. Filtration area 140 m2 Complete with electrical diagram and partial piping

Condition: good (used), Year of construction: 2016, operating hours: 3,890 h, filter area: 222 m², suction capacity: 20,000 m³/h, IVAT 20000 m3/h filter ventilation tower Industrial welding hall filtration - numerous technological processes in production plants, mainly carried out in metalworking. Suction from the top and draft-free exhaust from the bottom - exactly to the workplace. The principle of layered filter ventilation, the device does not require the installation of pipelines. Cartridge filter inserts - self-cleaning by means of compressed air pulses during operation. Filter cleaning by means of pressure difference - no loss of compressed air. The principle of layered ventilation: contaminated air is sucked in from the top, filtered and then released at floor level as clean air suitable for breathing without generating drafts, at a speed below 1.2 m/s. Exactly where employees inhale it. And this in a wide range of 270 degrees. The tower operates in accordance with the principle of layered ventilation, recommended by trade unions and considered the best type of air circulation. Brand: IVAT Model: Air FTower-20.000 Year of production 2016 Working hours: 3890 Nkjdpfx Aovrgbtefzst Parameters: 15 kW fan Air flow 20000 m3/h Filter surface 222 m2 6 cartridge inserts Built-in frequency converter. Additional final fine filter with an area of 65 m2 in filtration class F9 gives us higher air purification efficiency and additionally protects the fan in the event of damage to the main filter. Dust drawer with a capacity of 200 l. Very quiet operation 75 dB (A) Purification degree - > 99.9 % Stock no.: 0944

Condition: used, filter area: 60 m², suction capacity: 5,000 m³/h, Dust extraction, welding fume extraction, filter ventilation, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust absorber. PLYMOVENT MDB Multi Dust Bank Cartridge filter inserts cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. The fan is placed behind the filter on the clean side, which reduces the risk of explosion to a minimum. 5.5 kW fan complete with noise silencer Efficiency 5000 m3/h Filtration area 60 m2 Filter inserts 4 pcs. Nodpjwbtczofx Afzjkt Inlet diameter 315 mm The device is in very good technical condition.

Condition: good (used), filter area: 180 m², suction capacity: 9,000 m³/h, Dust extraction, welding fume extraction, filtering, self-cleaning filter, pneumatic, vacuum dust collector, absorber for plasma, laser, sandblasting and all kinds of dry dust. PLYMOVENT MDB / AZUR Cartridge filter cartridges cleaned pneumatically with pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. inlet diameter - 400 mm The fan has a power of 7.5 Kw. Capacity up to 9000 m3/h Filtration area of 180 m2 Dimensions: height - 3.10m width - 2.80m depth - 1.25m fan: Nodpfx Aou A Thlsfzskt 1.00m x 1.00m

Condition: excellent (used), Year of construction: 2012, Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. The device is equipped with a pre-separator and a mechanical spark trap. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: Donaldson Torit Nedoiypxiepfx Afzjkt Model: DFPRO 12-CYCLO Year of production - 2012 Donaldson Torit Ultra WEB patron filter cartridges - 12 pcs. Filtration area of 215 m2 18.5 Kw fans. Capacity 11000 m3/h Vacuum 3900 Pa Inlet diameter - 500 mm We also offer on request new filter cartridges tailored according to the purpose of the device. Dimensions: height - 5.00 m length. - 3.50 m width - 1.70 m weight - 2200 kg

Condition: good (used), Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. Brand: Vaupel - Gram Model : FL 104H High-pressure device. Filter cleaned by compressed air pulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables Nkjdpfx Afen Nw Ntozst extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters : Sound-insulated fan with silencer with 18.5 Kw output Capacity 8000 m3/h Filtration area 104 m2 Included : Filter unit Inverter Lime dispenser Noise suppressor

Year of construction: 1999, condition: good (used), DISA dust extraction, welding fume extraction, self-cleaning cartridge filters, pneumatic filters, vacuum filters for plasma, laser, sandblasting, soda blasting, shot blasting, plastics and catalysts, mineral processes and all kinds of dry dust. The filter is cleaned pneumatically with compressed air impulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Highly durable filter cartridges resistant to moisture. Aluminized, antistatic, operating temperature up to 135 degrees celsius. Njdshqd Tvjpfx Afzekt Fan power 11 Kw Efficiency up to 8000 m3/h. Vacuum up to 4300 Pa Filtration surface 128 m2

Condition: good (used), Mobile station welding fume extractor.dust extractor,filter ESTA SRF K-10 Nedpfx Aolqw Igjfzokt Fan of 1.3 Kw (230V) located on the clean side. Extraction arm with a range of 2 m. Capacity 950 m3/h. Vacuum pressure of 2800 Pa. The SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It is an excellent solution to the problem of welding fumes and other dust pollution. Welding or soldering fumes are filtered with a filtration efficiency of 99.9%. The high airflow rate can even pull out large clouds of smoke. Automatic filter cleaning manually activated - after finishing work, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotary nozzle, which significantly extends the life of the cartridge. During welding, the device does not need to be connected to the compressed air network and thus remains mobile.

Condition: good (used), Year of construction: 2017, suction capacity: 16,600 m³/h, negative pressure: 5,600 Pa, Dust extraction, welding fume extraction, patron filter self-cleaning, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, which makes the device highly efficient. Fan on the clean side which reduces the risk of explosion to a minimum. Brand: Donaldson Torit DCE Model: DFO4-24 Year of production - 2017 Nedpfx Afsttah Ujzekt Cartridge filter cartridges, oval - DFO ULTRA-WEB FR - 24 pieces Filtration area of 430 m2 45 Kw fan. Fan model : ART 631 N4T Built-in frequency converter and RITTAL SK 3305540 control cabinet air conditioner. Capacity 16600 m3/h Inlet diameter - 1 x 350mm , 2 x 300 mm Dust emptying cell sluice. Comes with a silencer and technical and electrical documentation. Also on offer on request new filter cartridges tailored according to the purpose of the device.

Condition: used, suction capacity: 1,600 m³/h, negative pressure: 2,800 Pa, Mobile station welding fume extractor, dust extractor , filter ESTA SRF K-15 FM Fan of 2.2 Kw (three-phase) located on the clean side Extraction arm with a range of 3 m Capacity 1600 m3/h Vacuum pressure 2800 Pa Nodpjtpui Ijfx Afzokt Possibility to connect a second extraction arm( inlet 2 x 140mm) SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It is an excellent solution to the problem of welding fumes and other dust contaminants. Welding or soldering fumes are filtered with a filtration efficiency of 99.9%. The high airflow rate can even pull out large clouds of smoke. Automatic filter cleaning manually activated - after finishing work, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotary nozzle, which significantly extends the life of the cartridge. During welding, the device does not need to be connected to the compressed air network and thus remains mobile.

Condition: not inspected (used), Welding fume extraction,dust extraction,self-cleaning filter,pneumatic,vacuum. Nkedpfx Ajip Nktofzst For welding,grinding,sandblasting and all kinds of dry dust. Cartridge filter cartridges. The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. Fan of 3,2 Kw Efficiency 1600 m3/h

Condition: good (used), Year of construction: 1998, filter area: 84 m², suction capacity: 2,000 m³/h, Dust extraction, welding fume extraction, cartridge filter self-cleaning, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting and all kinds of dry dust. Nodpfxjttkgxo Afzjkt The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. Fan on the clean side, which reduces the risk of explosion to a minimum. Built-in 4 Kw fan Capacity of 2000 m3/h Filtration area 84 m2 Cartridge filter cartridges - 4 pieces. Inlet diameter 200 mm Length - 1.80 m width - 1.10 m height - 1.80 m

Condition: used, Year of construction: 1999, suction capacity: 5,600 m³/h, negative pressure: 3,000 Pa, Dust extraction, welding fume extraction, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust. Filter cleaned pneumatically with compressed air pulses during operation, which results in high efficiency of the device. Sinbran filter cartridges. SINBRAN filter cartridges are environmentally friendly and therefore suitable for use in the pharmaceutical and food industries. They are suitable for separating aerosols of organic materials, such as those created during laser cutting operations. SINBRAN filter cartridges combine the advantages of membrane filters with the advantages of rigid body filters: Large filter surface requiring minimal space. High mechanical load capacity, very long life cycle, Nsdpfx Afevxtkzszjkt low pressure drop and high filtration efficiency is a new approach to dust removal that achieves impressive filtration results, even in particularly difficult applications. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters it causes minimal pressure loss. Short compressed air pulses during the filtration process ensure effective filter cleaning. 7.5 Kw fan Efficiency 5600 m3/h Sinbran filter inserts 12 pcs. Negative pressure 3000 Pa

Condition: excellent (used), Year of construction: 2019, operating hours: 2,595 h, filter area: 302 m², suction capacity: 13,250 m³/h, negative pressure: 7,230 Pa, The Gold Series industrial dust collector is a leading dust and fume extraction system for welding, grinding, thermal cutting, shot blasting, sandblasting, and glass bead blasting. Ideal for retaining toxic and flammable dust and fumes. The vertically mounted cartridge filters in the Gold Series dust collector use the patented HemiPleat technology, which keeps them cleaner and lasts longer than conventional pleated filters. Vertical operation of the filter elements allows for their effective cleaning with a compressed air pulse. Filter cartridges with different properties provide the best cleaning efficiency for different types of dust, including fine, fibrous and heavy dust loads. The filter is pneumatically cleaned with compressed air pulses during operation, which ensures high efficiency of the device. Nkjdpfjvu Tpcjx Afzst Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: Camfil Model: Gold Series GS10 Year of production - 2019 Worked hours - 2595 h New HemiPleat eXtreme Flame Retardant cartridge filter cartridges - 10 pcs. Filtration area 302 m2 37 Kw fan. Efficiency 13250 m3/h Negative pressure 7230 Pa Inlet diameter - 500 mm Equipped with HEPA H14 Absolute VGXL fine filters and a noise silencer. The device worked on grinding stainless steel. The device is in very good condition (like new), it worked inside the room.

Condition: good (used), suction capacity: 3,300 m³/h, negative pressure: 2,000 Pa, Dust extraction, welding fume extractor, self-cleaning filter, cartridge filter for plasma, laser, sandblasting, shotblasting The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Nkedpsunh Uvofx Afzet Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: DUST HOG / UAS Model: SBS-4-2 SD Engine power 4 Kw Fan in sound-absorbing housing Capacity 3300 m3/h Vacuum - 2000 Pa Filtration area - 112m2 Inlet diameter - 300 mm Cartridge filter cartridges - 4 pieces. Height - 3.90 m depth - 1.70m width - 1.25m

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Kemper CleanAirTower - CleanAirTower room air purification Energy-efficient room ventilation based on the displacement ventilation principle for welding fumes in production halls Application area: - For production and storage halls with high dust loads - Workshops where local extraction is not possible - As a supplement to local extraction systems - Environments with changing sources of dust/fume Benefits/Features: - Effective energy capture through Pinball method and Tornado principle - Low risk from foreign objects - Reduced heating costs due to air recirculation and distribution - Long filter service life through optimized airflow - High safety due to dust disposal without contamination - Cost-effective installation, also retrofittable, as no ducting is required - New head element retrofittable to existing systems - Safe transport and easy installation via crane lugs - KEMPER-Cloud connection via mobile network Technical data: * max. volumetric flow: 6,000 m³/h Nodpfx Aowthbvsfzokt * filter area: 60 m² * motor power: 5.5 kW * supply voltage: 3 x 400 V, 50 Hz * control voltage: 24 V DC * rated current: 11.0 A * sound pressure level: 72 dB(A) * compressed air connection: 5 - 6 bar * dimensions (W x H): 1,172 x 3,622 mm * weight: approx. 666 kg

Condition: good (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 190600036, ProfiMaster is a robust-quality filter unit designed for occasional to frequent use during welding with low to medium levels of welding fumes. The disposable filters of the extraction unit have a large capacity and can be replaced with particular ease. The rotatable and swivel extraction hood allows for a 360-degree working radius, minimizing repositioning during welding. - Hose configuration with 4 m arm - Includes start-stop automatic Nkjdpfx Afowxccfszjt The unit was purchased in 2019 and, due to operational circumstances, has not been used since spring 2023.

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0001, Offer 24587 Technical data: - Electrostatic filter with control light Nkjdpfx Afjwn Egrjzet - Exhausted and cleaned air is recirculated to the work area - Wall-mounted version with two jointed extraction arms - Jointed arm length approx. 9000 mm - Air volume flow approx. 4700 m³/h - Active filter surface 9.2 m² - Drive - Fan 400 V / 0.75 kW - Space requirement approx. W 700 x H 1600 x D 550 mm - Weight approx. 120 kg

Condition: ready for operation (used), A PlymoVent welding fume extraction system is available. Compressed air tank volume: 11l, compressed air quality: class 6, operating pressure: 4bar-5bar, compressed air consumption per pulse: 40nl-50nl. Documentation available. On-site inspection is possible. Nodpfx Afjvgfftozekt

Condition: excellent (used), Year of construction: 2019, operating hours: 9,058 h, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, filter area: 106 m², suction capacity: 7,000 m³/h, Dust extraction unit, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum system suitable for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 6 Year of manufacture: 2019 The unit has 9,000 operating hours. Filtration area: 106 m² Fan power: 7.5 kW Capacity: 7,000 m³/h Inlet diameter: 315 mm Dimensions: Height: 3.38 m Width: 2.10 m x 1.15 m Stock number: 1105 Njdpfxsydcyge Afzjkt

Condition: used, Year of construction: 2013, type of input current: three-phase, filter area: 53.1 m², suction capacity: 3,000 m³/h, Welding fume extraction, dust extraction, self-cleaning, pneumatic, negative pressure filter by Donaldson Torit. Suitable for welding, grinding, sandblasting, and all types of dry dusts. Cartridge filter elements. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high device efficiency. Nsdpfsx Hfiwjx Afzokt Brand: Donaldson Torit DCE Model: DFO 3-3 Fan power: 5.5 kW Capacity: 3000 m3/h Filtration surface: 53.1 m2 Inlet diameter – 2 x 150 mm Year of manufacture – 2013 Dimensions: Width – 1.65 m x 0.90 m Height – 3.25 m Stock no.: 1088

Condition: used, filter area: 40 m², suction capacity: 4,000 m³/h, Dust extractor, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum-based, suitable for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. Nedpfoxz Dy Uox Afzskt

Condition: used, Year of construction: 2012, operating hours: 3,745 h, type of input current: three-phase, filter area: 20 m², suction capacity: 4,600 m³/h, negative pressure: 2,800 Pa, Dust extraction unit, welding fume extractor, pneumatic vacuum filter unit and absorber by ULMATEC, designed for plasma cutting, laser cutting, sandblasting, welding dust and fumes, as well as all types of dry dust. Cartridge filter elements cleaned by compressed air. The fan is positioned behind the filter on the clean-air side, minimizing the risk of explosion. Model: IEP 20-2-2 Nkodpfjxz Dr Rsx Afzjt Fan power: 2.2 kW Max airflow: 4600 m³/h Max vacuum: 2800 Pa Number of filter cartridges: 2 Filtration area: 20 m² Inlet diameter: 180 mm Year of manufacture: 2012 Operating hours: 3745 h Inventory number: 1083

Condition: used, Year of construction: 2005, type of input current: three-phase, filter area: 286.8 m², suction capacity: 12,000 m³/h, Dust extraction, welding fume extractor, self-cleaning pneumatic vacuum filter for continuous operation from the renowned brand Donaldson Torit. Suitable for plasma, laser cutting, sandblasting, soda blasting, welding, and all types of dry dust. The fan is located after the filter on the clean side, significantly reducing explosion risk. Ultra Web filter cartridges are pneumatically cleaned with compressed air impulses during operation for high device efficiency. Fan power: 15 kW Capacity: 12,000 m3/h Connection diameter: 315 mm Filter cartridges: 12 pcs. Filter surface area: 286.8 m2 Year of manufacture: 2005 Nkedpfx Asxxkzmsfzet Equipped with 'SparkTrap' spark arrestor system. Stock number: 1044

Condition: used, Year of construction: 2003, filter area: 143 m², suction capacity: 6,000 m³/h, Dust extraction, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum extraction for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high efficiency of the unit. The fan is located on the clean side, reducing the risk of explosion to a minimum. Brand: Donaldson Torit DCE Model: DF+6-Cyclo Year of production: 2003 Filter cartridges – 6 pcs. Filtration surface area: 143 m² Fan power: 7.5 kW Capacity: 6000 m³/h Inlet diameter: 300mm/250mm We also offer, on order, new filter cartridges tailored according to the device's application. Dimensions: Height – 3.05 m Width – 1.85 m x 2.35 m Stock number: 0989 Nkodpow I Av Nofx Afzjt