Used Welding Fume Extraction Systems for sale (45,223)

Condition: excellent (used), Year of construction: 2017, No. 1 rectangular filter station with a mechanical shaker cleaning system, operating under positive pressure, with the following dimensions: Width: 3,400 mm Length: 6,600 mm Height: 7,500 mm Filtering surface: 396 m2 Manufactured from galvanized steel sheet, complete with: - No. 160 polyester satin filter bags, 350 g/m², Ø250 × 3,000 mm, open at both ends; Ndsdpfx Amsz Hz Htetoc - No. 320 galvanized quick-release clamps, Ø250 mm; - No. 2 filter support frames; - No. 1 electric motor, 2.2 kW – 6 pole; - No. 1 external filter housing enclosure; - No. 1 access door to the filter compartment; - No. 1 vertical access ladder to the filter compartment; - No. 2 clean-air discharge stacks complete with air sampling connections; - No. 6 braced support legs; - No. 1 dust collection hopper complete with inspection hatch; - No. 1 screw conveyor, complete with 2.2 kW – 4-pole gear motor, steel shaft and flight, bearings, and supports; - No. 1 rotary airlock valve, complete with 1.5 kW – 4-pole gear motor, steel shaft, and rubber blades; - No. 1 high-level indicator; - No. 2 transparent PVC inspection windows; - No. 1 Ø200 mm tee connection complete with anti-clogging micron vent; - New galvanized bolts, nuts, and sealing gaskets for future reassembly.

Condition: ready for operation (used), Year of construction: 2016, Felder clean air extraction unit | Dust extraction system RL 200 | Ø 200 mm Maximum flow rate: 4000 m³/h Nominal flow rate: 20 m/sec, 2300 m³/h Valve pressure: 2380 Pa Filter area: 20 m² Extraction connection diameter: 200 mm Residual dust content: < 0.1 mg/m³ Felder Briquetting Press FBP 50 Briquette diameter: 50 mm Nedpfx Amewa Rlkjtodc Throughput: 30–50 kg/h Motor power: 4 kW Dimensions (L x W): 1750 x 1270 mm Weight: 950 kg Hydraulic oil capacity: 125 liters Year of manufacture: 2016 Condition: Ready for use Price: €15,500 The system has already been dismantled and is stored in the Raasdorf warehouse.

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr231316, Technical Data – Used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2012 Extraction capacity approx. 500 m³/h Motor output approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W x D x H) Filter stages 1. Pre-filter F5 2. Centrifugal separator 3. Post-filter F5 (optional: HEPA H13) Filtration efficiency 99 % at ≥ 1–2 µm (F9), optional HEPA 99.95 % at ≥ 0.1 µm Noise level approx. 65 dB (model WS2 similar) Accessories & Features • Compact design for installation directly on or next to CNC machines Ndedpfx Aoz E N Tlomtec • Stand for extraction • Three-stage filtration for efficient oil and coolant mist separation • Cartridge filter optionally upgradable with HEPA kit • Easy maintenance, low-noise operation, and durable filter elements Technical data and information subject to change and error. Prior sale reserved!

Condition: used, functionality: unexamined, Ultrasonic welding system, Ecoline 20L model - Ultrasonic generator K5 2000W/20kHz - Shipping available for an additional charge. Njdjzlchlopfx Amtodc

Condition: like new (used), functionality: fully functional, Exhibition machine Njdpfx Aozrnqlsmtedc For sale is our Felder RL-125 clean air extraction unit from our showroom, with a maximum air flow rate of 1900 m³/h. The extraction unit is in like-new condition and has been inspected and refurbished by our qualified personnel. Technical data: - Clean air extraction unit RL-125 - Extraction connection 125 mm - Manual filter cleaning - Max. air flow rate 1,900 m³/h - Chip container with a capacity of 200 liters - 3 kW (4 hp) motor / 400 volts - H3 certified! The clean air unit is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-D1618

Condition: excellent (used), Height 480 cm Width 120 cm Nodpfxsw A Huao Amtedc

Condition: used, Dimensions (L x W x H): 1180 x 650 x 1980 mm Airflow rate: 565 m³/h Associated negative pressure: 2100 Pa Nodpfozn Uk Rsx Amtedc Filter area: 4.1 m² Chip volume: 135 l Weight: 116 kg

Condition: excellent (used), Year of construction: 2024, For sale is a Felder RL-160 clean air extraction unit with a maximum airflow rate of 3200 m³/h. The extraction unit is in very good condition and has been inspected and refurbished by our qualified technicians. (Fully functional) Technical specifications: Nsdpfxozy U Tis Amtodc - Max. airflow rate 3200 m³/h - Filter area 10 m² - Extraction connection diameter 160 mm - Manual filter cleaning - H3 dust-tested - Year of manufacture 2024 - Machine no. 31.11.049.24 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Clean air unit, extraction unit, extraction, clean air, RL Reference: R-A0117

Condition: excellent (used), Year of construction: 2011, Clean air filter with rotary valve airlock Integrated pre-separator Negative pressure monitoring Fire extinguishing system with powder fire extinguisher PLC control Machine recognition and damper control for 8 machines/dampers Filter material with BIA test, category “M” Chip disposal via rotary valve airlock Maintenance opening for raw gas area Motor power: 9.2 kW / 3-phase / 400 V / 50 Hz Intake nozzle: DN 300 mm Nominal volume flow: 4810 m3/h Maximum volume flow: 6000 m3/h Negative pressure at Vn: 2100 Pa Ndodpfx Ame Adrxbstec Filter area: 40 m2 Residual dust content: < 0.1 mg/m2 - H3 Sound pressure level: 81 dB(A) Compressed air consumption: 60 Nl/pulse Compressed air connection: 6 bar Dimensions L x W x H = 3015 x 970 x 2,280 Weight: 802 kg Note regarding used machines: • Errors and omissions in technical specifications and prior sale are reserved. • Stated prices are ex works, excluding loading! • The machine has been cleaned and functionally tested. • All machines are sold as is, without any warranty. The buyer is free to inspect the machines at the location. • Special agreements are only possible in writing. (We only answer inquiries if you provide your address and telephone number!)

Condition: good (used), Year of construction: 2017, machine/vehicle number: 17002702, Offer 25276 Extraction Filter System / Stationary Filter Unit with Wet Separator Ndodpfx Ajx Upd Uomtjc Technical Data: - suitable for moist, sticky dusts, metallic grinding - with heavy spark generation - single and multi-station extraction - volumetric flow approx. 5,150 m³/h - water capacity 390 l - drive power 400 V / 7.5 kW - required space W 1250 x H 3650 x D 1100 mm - weight approx. 550 kg

Condition: as good as new (ex-display), Code: N0060 Nedpfx Amozqr Ewetsdc Brand: FELDER - AUSTRIA Model: RL 160 - CE Standard Mobile industrial clean-air dust collector – CE Standard Max air flow rate 3200 m³/h Nominal air flow rate 20 m/s 1450 m³/h Nominal vacuum 20 m/s 2400 Pa Suction connection diameter 160 mm Cartridge filter Sound pressure level 70 dB Chip collection capacity 2 x 200 l Powder fire extinguisher Overall dimensions mm 1765 x 898 x 2065 h

Condition: used, functionality: fully functional, overall weight: 7,500 kg, total length: 14,470 mm, total width: 3,500 mm, total height: 1,509 mm, We offer this used CSM automatic tube welding system, manufactured in 2014. Our general terms and conditions apply. Payment in advance required. Nodpfxsz Hk Ero Amtjdc Shipping costs not included. If you have any questions or require further information, please send us a message or call us. Recommended tube diameters: 5 - 15 mm Wall thicknesses: 0.40 - 1.00 mm Using the profiling unit, a stainless steel strip from a coil is formed into a tube by passing through seven profiling stations. The continuously profiled tube is welded in the welding chamber (TIG) in a continuous process. The torch tracking system can detect and automatically correct changes in the position of the material joint relative to the arc during the welding process. A measuring wheel mounted on the continuously moving tube continuously measures its speed and records the length. A double straightening device eliminates any residual curvature of the tube during the continuous process. A flex unit continuously cuts the tube and places it on the sorting rail for tubes that meet or do not meet the quality requirements. Two deburring stations deburr the tube ends, and an automatic length measurement system measures each tube before it is placed in the box. The tube welding system is fully functional and can be inspected while in operation.

Condition: excellent (used), 4 kW motor 4 bags Length 3.1 m Width 1m Njdpfx Aoumk D Djmtsdc Height 3.1 m

Condition: good (used), Code: 0306 Brand: VM Model: 2/18 Suction system with 18 sleeves and 2 collection bags for carpentry workshops, furniture factories, sawmills, woodworking shops and various Technical data: N° 18 filtering sleeves N° 2 collection bags Motor Hp 7,5 Electrical panel Njdpfxsymfiio Amtodc Overall dimensions: mm 2800 x 1200 x 3200 h

Year of construction: 1988, condition: ready for operation (used), A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range: 250mm-1600mm, mesh length range: 600mm-2900mm, min. cross wire pitch: 15mm, min. longitudinal wire pitch: 25mm, increments of longitudinal wire pitch: 5mm, wire diameter range: 3mm-8mm, number of longitudinal wires: 20, number of welding presses: 12, rated power at 50%: 6x130kVA. On-site inspection is possible. Ndsdswfg Ewepfx Amtjc

Condition: used, A mobile extraction unit with a large filter area and a set of hoses for a small workshop. Technical data: Nsdpfx Ameztvwcstjdc - Extraction nozzle diameter: 160 mm - Motor power: 1.5 kW - Dimensions: 1,220 x 650 x 3,270 mm

Condition: used, ESTA Spänesog-SB 8151 Chip Extractor High-performance industrial extraction system from the quality manufacturer ESTA, model Spänesog-SB 8151. This system is ideally suited for workshops to extract chips and dust (e.g., during metal or wood processing). Technical data of the device Manufacturer: ESTA Apparatebau GmbH & Co. KG Model / Type: Spänesog-SB 8151 Voltage (Volts): 400 V Power (kW): 2.2 kW Current (Amps): 4.6 A Nodpfx Aeznibwomtsdc Frequency (Hz): 50 Hz Protection class: IP 54 (dust and splash-proof) You can find more new and used items in our shop! International shipping costs available upon request!

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 029.700, Painting/drying booth from Luft- und Trockentechnik GmbH, type KSP 6-BT, manufactured in 1992. Nsdpfxoz D Evys Amtsdc The system is suitable for painting and drying workpieces and features an integrated exhaust/extraction system. Technical data: Manufacturer: Luft- und Trockentechnik GmbH Type: KSP 6-BT Year of manufacture: 1992 Manufacturer's number: 029.700 Usable volume: approx. 72 m³ Total volume: approx. 81 m³ Minimum exhaust air volume flow: 1,440 m³/h Maximum permissible oven temperature: 90 °C Maximum solvent quantity: 4,302 g/oven load The painting booth has dimensions of 6 x 4 meters. The system includes an exhaust duct with extraction via the roof. In addition, a suspension/transport system is located in the ceiling area, to which workpieces or painting racks can be attached and moved through the work area. Dismantling will be carried out by the buyer.

Condition: new, 3 waste bags Ndodpfx Amezqa Tiotsc capacity 8000 m3/h motor power 7.5 kW bag shaking mechanism air return channel power supply 380V

Condition: new, Available from stock in various versions! Suitable, for example, for machines from Emmegi, Elumatec, Pressta-Eisele, Mecal, Fom, etc. For installation on aluminium circular saws, ideally suited for double mitre saws and automatic sawing systems. Power output 2.2 or 3.0 kW, with or without remote start feature. 160 litre removable container. 2 extraction ports. Mobile, with 2 lockable rollers. Hoses, connectors, and reducers available to suit your requirements. Njdpjwczfasfx Amtodc

Condition: used, Chemagen chemagic Magnetic Separation Module I The chemagic Magnetic Separation Module I (chemagic MSM I) automates the isolation of nucleic acids within one hour. Viral RNA from 96 nasal swab samples can be isolated simultaneously. The Chemagen MSM-1 is an automated system for high-throughput isolation of nucleic acids (DNA/RNA). It utilizes a patented magnetic bead technology, in which magnetizable metal rods are immersed in the process solutions to efficiently collect and re-suspend the bound particles. Technical Features & Capacity Throughput: The system has a modular design and can process 12, 24, or 96 samples simultaneously, depending on the rod head used. Sample Volume: It offers high flexibility for volumes from 10 µl to 10 ml. Processing Time: 96 samples (small volumes): approx. 15–60 min. 24 samples (medium volumes): approx. 35–60 min. 12 samples (large volumes): approx. 45–60 min. Technology: The particles are re-suspended by rotating the metal rods at up to 2,000 rpm, which enables high yield and purity without cross-contamination. System Components & Extensions Automation: The MSM-1 can be integrated into standard liquid handling units and often features a 6-axis industrial robot for fully automated sample tracking. Software: The system is controlled via the chemagic QA software, which is LIMS-compatible. Applications The device is primarily used in research and diagnostics, including: Biobanking and human genetics HLA typing Detection of viruses and bacteria Extraction from various materials such as whole blood, saliva, serum, or plasma Nodpfeyk Uu Njx Amtsdc System Components Actuators: High-precision linear axes for vertical movement and a rotary axis for mixing Electromagnet: Central unit for controlling the magnetic attraction to the metal rods Interfaces: Integrated PC with screen, keyboard, and barcode scanner for sample tracking Software: chemagic QA software (LIMS-compatible, logging, user management) Special Features Cross-Contamination Protection: The use of disposable protective sleeves (tip combs) for the metal rods prevents contact between samples. Automation: Can be combined with the chemagic Dispenser for automated buffer filling or integrated into liquid handling robots (e.g., Hamilton, Tecan). Rod Heads: 96 Sampling Volume: 10 - 400 μL Number of Samples: 1 to 96 samples TFT monitor, keyboard, and mouse Year of manufacture: 2007 Dimensions & Structure Base machine (W/D/H): approx. 600 x 640 x 950 mm. Carrier axis (W/D/H): 1940 x 170 x 200 mm (in the fully expanded configuration with rail system). Total space requirement: A fully configured system can occupy up to 2000 x 740 x 800 mm (L/W/H). You can find more new and used items in our shop! International shipping costs on request!

Condition: excellent (used), Professional 3M Speedglas welding set with Adflo powered air-purifying respirator (PAPR) system. Used equipment, fully functional, in good technical condition. Ideal for professional MIG/MAG, TIG, and shielded metal arc welding (SMAW) applications. ⚠️ Price is for 1 set (1 SET). The set includes: 3M Speedglas auto-darkening welding helmet, 3M Adflo PAPR system, waist belt, air hose, charger, Nsdpfx Asz Sm Dqsmtjdc Speedglas carrying bag, battery. Condition: used equipment, normal signs of use, visible in the photos, visor darkens properly, PAPR system starts and operates, complete set as shown in the photos. Applications: MIG/MAG welding, TIG welding, SMAW welding, industry, workshop, manufacturing, metalworking. Why it’s a good choice: reputable 3M Speedglas brand, very high level of comfort, respiratory protection thanks to the Adflo system, convenient carrying bag, professional, premium-class equipment. Shipping by courier or personal pickup is possible.

Condition: used, Scanlab PowerScanII 50i Aperture 50 mm Angle encoder, galvanometer scanner, analog position detector Optics, wavelength ranges (standard): 9400 nm, 10600 nm Max. laser power: 2500 W @ 9400 nm, 10600 nm Typical deflection angle: ±0.35 rad (optical) Dynamics, number of installed tunings: 1 Typical tuning: Fast-Vector-Tuning Settling time: < 0.45 ms Positioning speed (f = 160 mm): 20 rad/s Step response (100% full scale) 1% full scale: 1.0 ms 10% full scale: 4.5 ms Accuracy Nsdpfx Amszikcfotodc Repeatability (RMS): < 4 µrad Position resolution (max.)*: 18 bits for XY, 16 bits for Z * Non-linearity: < 2.1 mrad / 44° 8-hour drift (after 30 min) Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner Digital controller card Control interface (alternatives): digital SL2-100 Extended diagnostics: yes (iDRIVE) Supply voltage (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan axes: 3-axis system with integrated varioSCAN Housing versions: scan head Connector positions: relative to beam exit Weight without lens (standard housing): 35 kg Size (L x W x H) (standard housing) (433 x 268 x 266) mm³ (with varioSCAN) Beam offset: 72.72 mm Other features Water cooling: yes Air cooling: yes Other specifications Operating temperature: 25 °C ± 10 °C Deviation of deflection angle: < 5 mrad Deviation from zero position: < 5 mrad Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Shipping & Collection: Secure shipping on a pallet (by arrangement) or collection on site is possible. We will be happy to answer any further questions you may have by telephone.

Condition: used,

Condition: ready for operation (used), Extraction system consisting of a filter unit, rotary valve airlock, and a fan. Filter data: Filter base area approx. 2000 x 2000 mm Filter unit height approx. 5000 mm Ndodpoz Dtmyofx Amtoc Filters partially defective Return air duct Pipes from the filter to the fan Accessories: Rotary valve airlock approx. 1800 mm Fan: Output unknown (previously used to extract dust from a four-sided planer) Price ex works for self-dismantling Further technical data available upon request All information without guarantee