Used Wig Welder for sale (307)

Condition: used, machine/vehicle number: 12304, functionality: fully functional, actuation type: electric, Equipment: rotational speed infinitely variable, For sale is a high-quality and robust industrial bandsaw, manufacturer THIEL SEGURA 117. The machine is produced by Gebrüder THIEL GmbH, Sand near Kassel, and impresses with its solid construction and classic German industrial quality. Technical data (according to nameplate): Model: THIEL SEGURA 117 Machine ID: 12304 Machine Specifications Wheel diameter: 300 mm Throat: 450–500 mm Max. workpiece height: 220 mm Table size: 600 × 600 mm Tilting table: yes, partially in 2 directions Saw blade length: 3350 mm Saw blade width: approx. 10 mm Blade speed: 15 – 125 m/min or 125 – 1000 m/min partially infinitely variable Weight: Dkjdpfx Asy Sf Udek Aow approx. 700 kg Dimensions: approx. 1.0 × 0.7 × 1.8 m Equipment: -integrated bandsaw blade welder (IDEAL BS00) -grinding stone for deburring the weld seam -infinite speed control All technical data without guarantee.

Condition: good (used), Format: 500x500 mm Dkjdpfxsgt Upls Ak Ajw

Condition: good (used), Format: 500x500 mm Dkodpfx Aogt Un Sek Aew

Condition: good (used), Format 500 x 500 mm. Dksdpfxegt Unks Ak Aew

Condition: excellent (used), 2 units per side, 5.5 kW motors 40 mm spindles Maximum working length: 250 cm Maximum working height: 180 mm Overall dimensions: 230 cm width 450 cm length Dsdpo Aful Tefx Ak Aokw 190 cm height

Condition: excellent (used), CONTEC-COMPRESSORS CEBORA 3840 TS WITH SYNERGIC WIRE FEED CONTROL, MAXIMUM WELDING CURRENT 380A, Dsdpfx Aksd Hr Nlo Aekw COOLING SYSTEM, 4-ROLLER WIRE FEEDER, 2-STROKE, 4-STROKE, FULL WIRING HARNESS. EQUIPMENT IN FULLY OPERATIONAL CONDITION. CONTEC-COMPRESSORS

Condition: used, Machine description Used continuous finishing line for steel flat bar and strip, second-hand and for sale complete with 15 in-line stations. Entry section: DIMECO decoiler with expanding mandrel, roller straightener, welder, drive unit and loop table. Surface preparation: FISHER inline shot blasting machine with dust collector and suspended brush-shear. Sizing section: cold, dry 2-high rolling stand, continuous tension straightener and Zumbach USYS laser gauge. Exit section: pneumatic shear, cut-to-length shear, bar run-out conveyor and product-specific coil recoiler. Schneider Electric Magelis operator panel with bar and coil modes. Capacities, year of manufacture and installed power: not specified. Applications This descaling, cold rolling and sizing line converts hot-rolled strip or flat bar coils into shot-blasted, cold-rolled, straightened and gauged products, delivered as cut-to-length bars or coils. Typical buyers include steel mills, flat wire and strip producers, spring and blade manufacturers, stamping plants and flat product finishing centres. Key features / Advantages Complete finishing line from decoiling to packaging, with mechanical shot blast descaling instead of acid pickling. Components from active manufacturers (DIMECO, Zumbach, Schneider Electric) make spare parts easier to source. Bar or coil output on the same line. A second line of identical configuration is also for sale, and both can be purchased as a matched pair. Sold as-is, dismantling by the buyer, available now from All Metal, specialist in used industrial machinery. Configuration: 15 posts online Unwinder: DIMECO, expanding chuck Surface preparation: fisher nip fryer? Rolling: dry cold rolling cage (duo) Straightening: roller straightener + continuous tension straightener Measurement: laser Zumbach USYS Cut: pneumatic shear + shear for length cutting Dkodpez N Ahxofx Ak Asw Exit: bar rail conveyor + dedicated product winder Production modes: barrel / crown Order: Schneider Electric Magelis HMI Processed products: plates and steel straps Sale: as is, dismantling at the buyer's expense

Condition: new, Year of construction: 2020, functionality: fully functional, type of cooling: water, laser power: 350 W, Equipment: documentation/manual, type plate available, New AC/DC Pulse welder with CWF wire feeder, previously on display in the showroom. Dksdpozu Tv Eefx Ak Asw

Condition: good (used), Good working condition. Please check out our other listings as well. Dkodjn Uv Ulspfx Ak Asw

Condition: good (used), machine/vehicle number: 202 0239, range of control current flow: 25 - 190 A range of control alternating flow: 25 - 190 A Djdocvbu Ropfx Ak Askw current flow 60% ED: 190 A current flow 100% ED: 160 A alternating flow 60% ED: 170 A alternating flow 100%ED: 160 A space needed: 1200 x 600 x 800 mm weight: 300 kg

Year of construction: 2010, condition: good (used), functionality: fully functional, The Branson ultrasonic welder is used for joining plastic parts without the use of joining material. Frequency 20 kHz, power 1000-2000W, voltage 230 V AC, stroke 100 mm LxWxH: 400 x 500 x 1200 mm Dkjdpfx Akevt Sc Eo Aow

Condition: good (used), Year of construction: 2013, 1 used robotic welding system Manufacturer: Yaskawa/Motoman Year of manufacture: 2013 With 2 robots (load capacity: 1 x 165 kg, 1 x 50 kg) Each with 1 x WIG AC and DC welding system from EWM, 1 x spot welding tongs from Dalex, and 2 swiveling fixture systems Year of manufacture: 2013 Suitable for welding housings made of steel, stainless steel or aluminum Technical specifications Robotic welding system – Specifications / Equipment Robotic welding system Dimensions W x D x H: 16,000 x 6,000 x 2,500 mm - Control system S7 for fixture Double welding cell with 2 maintenance doors and 2 loading stations - Opaque enclosure Robots / Positioners 2 Motoman 6-axis welding robots 1 x 50 kg version 1 x 165 kg version - Extended design 2 x bases 1 x control unit with operator panel DX - Master - Slave 1 x floor-mounted chassis with 2 parking stations 2 stations - rotary tables with integrated pneumatics for "clamp on" function Centrally programmable in sync via 1 robot control unit Media feedthrough for compressed air and electrical signals in the positioner Design and manufacture of a base frame for part support Welding and clamping table S 4 3,000 x 1,500 mm with tool set 2 Digital I/O card for welding equipment EWM WIG welding system Tetrix 422 DC - RC Article no.: 520000050019 For automated and robotic applications Inverter DC welding unit Standard interfaces for automation (Start/Stop, pilot voltage, current flow), optional interfaces TETRIX RINTX11, industrial bus interface TETRIX BUSINTX11, documentation interface PCINT X10 (+ software Q-DOC 9000), and monitoring and documentation system WELDQAS Controllable parameters with interfaces: 256 jobs (welding tasks) with 16 programs each in program mode, as well as wire speed, correction of arc length and arc dynamics via pilot voltages, etc. Connection options: Remote control, optional interfaces for automation, documentation and PC connection Output 5 - 420 amps 420 amps 60% duty cycle - 40 °C 360 amps 100% duty cycle - 40 °C Power supply 400 volts (-25% / +20%) Dimensions 654 x 576 x 374 mm Additional cost for AC/DC version – 1 unit EWM WIG cold wire feeder Tetrix Drive ROB Article no.: 520000040018 Quantity: 2 units Lightweight, compact wire feeder for mounting on a robot or fixture Dedpfsz Aac Usx Ak Askw 4-roller drive Connection for water cooling Control with digital incremental encoder Push-pull capable Separate button for wire retraction, gas test and wire threading Parameter setting and storage centrally via welding system control unit Wire speed 0.1 to 5 m/min Wire feed steps 0.01 m/min Weight 6.5 kg Dimensions 345 x 230 x 250 mm Left-opening design ABITIG WH torch system Alternating neck technology Push-pull drive for precise wire feed Water-cooled Output 400 amps Torch holder and changing station with pneumatic locking Design and manufacture of a part support for aluminum rear panel Resistance welding equipment / other components Resistance welding equipment for robot, consisting of - Medium frequency inverter power source - Transformer with 250 kVA rated power - X-welding tongs High-performance water chiller Design and engineering Documentation such as machine design and parts lists in a simple form in German CE declaration Welding fume extraction system with piping

Condition: used, MIG MAG welding machine, gas-shielded welding unit, CLOOS type GLC 357 N MIG MAG welding power source Manufacturer's number: 576, Year of manufacture: approx. 1985 Rated power: 350 Amps Dkedpfx Aehubg Tjk Aow Power: 350 Amps - 80% duty cycle 310 Amps - 100% duty cycle Adjustment range: stepless Connecting hose package: 4.5 meters Mains connection: 380 Volts, 50 Hz, 32 Amp plug - 2-cycle and 4-cycle welding system - external wire feeder, type CK 72 ZK, with 2-roller drive and 4.5-meter hose package - 3-meter hose package with central connection and CLOOS hand torch - water-cooled - pressure gauge for gas cylinder - welding machine equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 260 kg Device tested - function is working properly.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 730 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 24 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 3,000 W, laser wavelength: 1,080 nm, Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine AIRTECH 3 kW – Top Technology for Efficient Sheet Metal Welding Discover the smart and powerful solution for precise laser welding: the Airtech handheld laser welding system with 3,000 watts of power! Ideally suited for demanding sheet metal fabrication – efficient, safe, and highly flexible in use. Highlights and Features: - Power: 3,000 watts for top welding quality and speed - Laser wavelength: 1080 nm, continuous operation with modulation frequency up to 20 kHz - Handheld laser welding head – optimally positioned for comfortable operation Dksdpfjwzv D Iox Ak Aow - Robust housing, intelligent internal layout for maximum service life - Touchscreen display for easy operation - Optional automatic multifunction wire feeder - Safety features: three-color alarm, safety interlocks, misuse protection mechanism - Cooling via separate water circuit with 13-liter tank capacity - CE-certified components according to European standards Your Advantages - Safe operation thanks to extensive protection mechanisms and alarm systems - Flexible applications including automatic wire feeding and robotic integration - Low operating costs and easy maintenance through well-designed technology and durable components For more information or a consultation, the Airtech team is happy to assist you!

Condition: excellent (used), Angle welding machine Make: Meurer Model: CM/W3 Dkodpfex Tpf Njx Ak Asw Year of manufacture: 2002 Welding frame: 460 x 700 mm 220 volts Length: 1950 mm Depth: 770 mm Packing table height: 870 mm

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* Dedpfjxrb Tgex Ak Aekw * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: used, OTO MILLS Strip Joiner 100% automatic butt-welding unit GG566 - Complete automatic joining and welding process Dksdpfxoymatvs Ak Ajw - Strip exit table with encoder - Motorized strip exit Pinch-roll OTO Mills 100% automatic butt-welding unit: GG566

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 30,000 l, Equipment: documentation/manual, BRINOX 30,000 L WWAS / Solution Tank – 316L – PED – FAT – Complete GMP Documentation – incl. Saddle Supports – 2020 – Like New Manufacturer: BRINOX d.o.o. Tag No.: LV6456-BH1001 Serial No.: 1003464 Year of Manufacture: 2020 Condition: Like new / unused Location: Europe LV6456-BH1001 Package 66 TECHNICAL DATA Product type: WWAS / solution tank / pharmaceutical process vessel Working volume: 30,000 liters Total volume: 33,213 liters Product contact material: Stainless steel 1.4404 (AISI 316L) Surface finish: Chemically pickled, passivated and cleaned Surface roughness: Ra < 1.6 µm Standards and guidelines: • PED 2014/68/EU compliant • CE marking available • GMP-compliant pharmaceutical design Pressure data: Min.: –0.14 bar(g) Max.: +0.5 bar(g) Test pressure: 0.72 bar(g) Temperature range: –20°C to +50°C Hydrostatic pressure test performed. FAT – Factory Acceptance Test Fully documented FAT carried out including: • Dimensional, visual, and identification inspection • Weld seam testing and NDT • Pressure test according to PED • Testing of all connections • Documentation and quality inspection FAT successfully completed. FAT report available. DESIGN / CONSTRUCTION • Horizontal pharmaceutical process vessel • Stainless steel 316L, pharmaceutical grade • Interior surface pickled and passivated • Hygienic, GMP-compliant construction Connections include: • Manway DN500 • Inlet DN100 • Outlet DN50 • Measuring, safety, and process connections Mechanical configuration: • Original BRINOX stainless steel saddle supports included • Heavy-duty design • Lifting points for crane handling present CONDITION • Absolutely as new • Never installed or used in production • Never filled with product • No corrosion or signs of use • Original industrial packaging available • Immediately available Saddle supports are also as new and included in delivery. Dkedpfx Asykngfsk Aew DOCUMENTATION – fully available (GMP-compliant) Extensive manufacturer and project documentation including: • EU Declaration of Conformity and CE documentation • PED certificates • Material certificates EN 10204 – 3.1 • Welding documents (WPS/WPQR, welder lists) • NDT inspection reports • FAT protocol and pressure test report • Roughness and surface protocols • Calibration certificates • Part drawings and parts lists • Operation and maintenance manuals Documentation fully available in digital form. TRANSPORT AND PACKAGING • Professional export packaging provided • Original industrial packaging • Crane handling possible without issues • Worldwide shipping possible SUITABLE FOR • Pharmaceutical industry • Biotechnology • WWAS, WFI, and PW systems • Sterile process solutions • GMP production plants SPECIAL FEATURE Project surplus from an international pharmaceutical new-build project with complete FAT, PED compliance, and GMP documentation. Large-capacity BRINOX 30,000 L pharma process vessel in as-new installation quality, incl. saddle supports – immediately available.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, type of cooling: water, CoWelder with Universal Robots UR10 – Migatronic Pi 350 AC/DC We are offering for sale a CoWelder robotic welding system with Universal Robots UR10, complete with Migatronic welding equipment. The system was purchased in 2021 and has been used in production, but only to a limited extent. It is in good condition and available for immediate sale. Equipment included: CoWelder robotic welding system Universal Robots UR10 collaborative robot Migatronic Pi 350 AC/DC welding power source Cold Wire Feeder (CWF) Water-cooled welding torch Dsdpfx Asz D Uufek Askw The system is suitable for automated and repetitive welding applications and can be used for a wide range of welding tasks. Technical information: Manufacturer: Migatronic / Universal Robots Model: CoWelder / UR10 Robot: Universal Robots UR10 Welding power source: Migatronic Pi 350 AC/DC Cold Wire Feeder: CWF Water-cooled welding torch Year of purchase: 2021 Condition: Used, good condition The welding/work table is not included in the sale. The equipment can be inspected by prior arrangement. Price: EUR 34,900 net + VAT The equipment is sold as a complete set.

Condition: new, Year of construction: 2025, Butt Welding Machine Technical Specifications: Model: KAB10 CE certified Operated: Foot Power at 50% ED 10kVA, Continuous power 7.1kVA Welding Capacity: Up to 8mm + 8mm mild steel wire Primary winding: Copper wire Dkodpfx Akjtwfv De Aew Secondary winding: Copper bar Core: Silicon steel EI core Mains Connection: 400V/50Hz Power Input Cable: 3m Protection Class: IP21 Space Requirement (W/L/H): 625mm x 600mm x 1035mm Weight: 90Kg Warranty: 1 years (+10 years spare parts support)

Condition: not inspected (used), Welding Technology Complete Package – Kemppi, Artec & Kemper MIG/MAG, TIG and electrode welding / Welding fume extraction / Oxy-fuel welding For sale is a comprehensive used welding technology complete package for professional workshop and industrial use. It includes welding machines for MIG/MAG, TIG and electrode welding, wire feeder, welding fume extraction and oxy-fuel / flame cutting equipment. Technical data: Kemppi RA 450 W MIG/MAG welding power source Manufacturer: Kemppi, Finland Model: RA 450 W Serial number: 6224531 Welding process: MIG/MAG Welding current range: 40–450 A 450 A / 36.5 V at 45% duty cycle 400 A / 34.0 V at 60% duty cycle 310 A / 29.5 V at 100% duty cycle Mains connection: 380 V / 50 Hz / 3-phase Integrated water cooling Mobile industrial design Kemppi FU 20 wire feeder Manufacturer: Kemppi, Finland Model: FU 20 Device type: MIG/MAG wire feeder Wire feed speed: stepless 0–18 m/min 2-cycle/4-cycle operation Suitable for Kemppi RA 450 W Artec TIG 250 AC/DC TIG welding machine Manufacturer: Artec / W-TEC Schweißtechnik GmbH, Bochum Model: TIG 250 AC/DC Factory number: 00301991 Welding process: WIG/TIG AC/DC Welding current range: 6–260 A 250 A at 60% duty cycle / 200 A at 100% duty cycle Open circuit voltage: 68 V Mains connection: 380 V / 50 Hz Power consumption: 14 kVA Protection class: IP23 AC/DC and pulse operation Water-cooled TIG torch with hose pack Dsdpfx Akezwfppe Askw Mobile industrial design Artec GL 320 welding machine Manufacturer: Artec Model: GL 320 Welding current: up to 320 A Stepless welding current adjustment Adjustable arc dynamics Remote control connection Three-phase connection Mobile industrial design Kemper welding fume extraction unit Type 91510 Manufacturer: Kemper GmbH, Vreden Type: 91510 Machine number: 8708418 Device type: mobile welding fume extraction / filter unit Airflow rate: 1,200 m³/h Static pressure: 145 mm WS Power: 0.75 kW Rated current: 2.0 A Connection: 380 V / three-phase With two extraction hoses/arms and extraction hoods Mobile cutting / oxy-fuel flame cutting carriage Manufacturer / Type: not identifiable For oxy-fuel flame cutting and welding Design for oxygen and fuel gas Robust two-wheeled industrial design With hand cutting torch, pressure regulators / gauges and oxygen and fuel gas hoses Equipment / Scope of delivery: Kemppi RA 450 W Kemppi FU 20 wire feeder Artec TIG 250 AC/DC Artec GL 320 Kemper Type 91510 welding fume extraction unit Mobile cutting / torch carriage Oxy-fuel welding and flame cutting equipment TIG torch and hose pack MIG/MAG hose and connection packs Hand cutting torch Pressure regulators / gauges Oxygen / fuel gas hoses Connection and welding cables Further accessories as shown in the pictures Condition: Used. Optical condition as shown in the pictures. Normal age-related signs of wear are present. All machines, devices and accessories are offered in their existing condition. No functional test has been performed. The devices are explicitly understood to be untested. Items not explicitly mentioned or only shown in the background are not part of the sale. Shipping by freight forwarder possible. Changes, errors and prior sale reserved. We will be happy to answer any further questions by telephone.

Condition: used, Year of construction: 2007, machine/vehicle number: 0185476, Offer 26283 Technical data: - Water-cooled WIG – DC welding system, mobile - Welding current continuously adjustable with digital display - min. 5 A to max. 420 A - Mains connection 400 V - Including: - SYNERGIC control with programmable welding tasks - 2-cycle – 4-cycle setting - HF ignition and Liftarc - Gas pre-flow control, etc. - Hose set 8m, lightweight design - Ground cable - Pressure regulator - Space requirement approx. W 700 x H 1200 x D 1200 mm - Weight approx. 200 kg Dedpfxez Rwiys Ak Askw

Condition: used, TIG + Shielded Metal Arc Welding Machine MESSER GRIESHEIM Type Uniwig GW 280 AC/DC Serial No. 4930185 Year of manufacture: 1985 Performance for TIG welding: 280 amps at 80% duty cycle (AC) 250 amps at 100% duty cycle (AC) 230 amps at 100% duty cycle (DC) Performance for stick electrode welding: 250 amps at 100% duty cycle (AC) Dsdpfx Akexf Uw Se Aokw 200 amps at 80% duty cycle (DC) Adjustment range: 3 coarse steps and infinitely variable Power supply: 400 volts, 50 Hz - 4-meter hose package with TIG torch - 2-stroke and 4-stroke welding function - Weld time setting for spot welding - Water-cooled - Gas pressure regulator Required space (L x W x H): 1050 x 590 x 1000 mm Weight approx. 300 kg Good condition

Condition: used, Movable welding bench MP 75, PE welding bench, PE pipe clamp, Socket fusion welder, Used machine Overall dimensions: Length: 665 mm Width: 480 mm Dkodps Ah D Aiefx Ak Ajw Height: 380 mm Pipe clamp size: 40–75 mm Weight: 15 kg The MP‑75 welding bench can be used with any fittings sized 40–75 mm, since each clamping jaw can be adjusted individually. Any suitable welding machine can be used for the welding process (not included with the bench). The total weight of the bench is only 15.5 kg. If the two outer jaws are not needed during welding, they can be removed, reducing the total weight by about 4 kg. The construction ensures the ideal fixation of pipes and fittings to be welded.

Condition: like new (used), Year of construction: 2008, SPECIFICATION KB-45 Cutting capacity 455mm Maximum working height 255mm Table 600 x 500 mm Tilt 4 ways up to 15° Saw blade length 3490mm Saw blade width 3-16mm Saw blade speed 25-115m/min Butt welder capacity 3-16mm Motor size 1HP Weight 285 Kgs Height 2020mm Width 1100mm Depth 660mm STANDARD FEATURES Djdju Rdr Rjpfx Ak Aokw Overload switch Single-phase / 3-phase supply Built-in saw blade and tire cleaning brush Saw blade welder, blade shear and grinder Slotting table Low-voltage halogen lamp Mitre guard for angled cuts Quick rip fence for straight cuts