Vertical band saw

Weipert KB 45

Condition: used, functionality: fully functional, Year of construction: 2012, DUE TO CHANGEOVER TO HEUFT THERMAL OIL OVEN TECHNOLOGY WE OFFER: Used HEIN oven system 5 StoneRoll 2 Ecostone² with baking technology Cedpfx Abeu Uubhjnept 5 HEIN STONEROLL ANNULAR TUBE DECK OVENS ▪ TYPE: SR 106 3/8 ▪ 3 BAKING TRAYS 1000 X 600 PER SHELF ▪ 8 LEVELS = 24 BAKING TRAYS ▪ BAKING SURFACE: 14.4 M² ▪ USABLE HEIGHT PER DECK ~ 178.7 MM ▪ EXTERNAL DIMENSIONS: 1900 X 2500 X 3590 (BHT) ▪ BURNER: OIL ▪ WITH TROLLEY DRIVE ▪ YEAR OF CONSTRUCTION: 2012 ACCESSORIES: ▪ 15 BAKING TROLLEYS WITH 8 TRAYS ▪ 2 STONE TROLLEYS ▪ 1 LOADING TROLLEY ▪ 1 UNLOADING TROLLEY ▪ 1 COOLING TROLLEY 2 HEIN ECOSTONE² RACK OVENS ▪ TYPE: LR1-108-5-D ECOSTONE ▪ ROTATING PLATE ▪ FOR BAKING TRAYS 1000 X 600 ▪ BAKING SURFACE: 12 M² ▪ EXTERNAL DIMENSIONS: 175 X 168 X 2970 (TBH) ▪ CONNECTED LOAD ACCORDING TO MANUFACTURER: 100 KW ▪ BURNER: OIL ▪ TOUCHSCREEN COMPUTER CONTROL ▪ YEAR OF CONSTRUCTION: ONE OVEN BUILT IN 2019, ONE OVEN BUILT IN 2017 Below are the key details: • Loading: We will load the equipment onto the buyer’s trucks. • Condition: Sold as seen on site, without installation or warranty. • Inspection: The ovens are currently operational and can be visited for inspection at their location in St. Vith, Belgium, near the German border. Note: All information is provided to the best of our knowledge but without guarantee. Errors, prior sale, and technical changes are reserved. There may be deviations from the listed accessories.

Condition: new, Year of construction: 2025, CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Machine characteristics CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Operator starts the machine by pressing the START button and sets cutting speed. After the cycle is finished the machine automatically stops and the operator lifts the arm to the starting position. The band saw arm is made of massive, uniform cast iron, and together with 27 mm wide cutting band enables high quantity cutting of structural steel, stainless steel and tools. The vice is located in an adjustable bed and equipped with a quick clamp. Blade guides are equipped with a ball bearings system and cemented carbides, ensuring excellent cutting precision and straight cut. It has a huge impact on the band guiding, its durability, accuracy and cutting quality. The carbide guiding drastically reduces the wear of both the machine and the blade. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a double-sided swivel arm and a control panel. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 44 and 88 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Ø max 260 mm /perpendicular cutting H×B max 320×160 mm /perpendicular cutting Power supply - 3–phase, 400V Total power - 1,5 kW Cpodpoi D Dgwsfx Abnst Arm lowering control - hydraulic cylinder Band dimensions - 2740×27×0.9 mm Band speed - 44 / 88 m/min Vice base height - 920 mm Dimensions - 1400×880×1550 mm Weight - 280 kg Cutting parameters Angle 0º ---- ø260 320×160 255×255 45º R ø210 210×200 210×210 60º R ø135 135×130 130×130 45º L ø160 220×130 160×160 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, WMD30LV - 230V / 1F Drilling capacity steel ----- 32 mm Milling capacity steel ----- 20 mm Flute cutters ----- 76 mm Motor ----- brushless 1.5 KW Spindle speed stepless 50 - 3000 rpm Spindle stroke ----- 70 mm Spindle mounting ----- ISO 30 Codega T Agopfx Abnopt Worktable ----- 840 x 210 mm Cross travel ----- 220 mm Longitudinal displacement ----- 565 mm T-slots ----- 3x14 mm Unloading ----- 240 mm Distance spindle - table ----- 470 mm Weight ----- 230 KG STANDARD ACCESSORIES * Drill head incl. drill chuck * Digital depth stop * Digital spindle display * Fine adjustment * Left / Right switch * Milling head left / right 90 degrees rotatable * Toolbox OPTIONS * 3-axis digital readout * Base cabinet * Automatic longitudinal feed * Milling clamp * ISO30 Collet holder & 12 collets in case * Milling set

Condition: used, Round-tub vibratory finishing machine WALTHER TROWAL Type CLS-230 Order No. 05.833/00 Year of construction 1969 Tub diameter 1100 mm Total tub height approx. 650 mm Working container / Gross volume max. 230 liters Usable volume approx. 115 liters Speed 1100 to 1800 rpm, stepless Motor power 7.5 kW Power connection 400 Volt, 50 Hz - Operating cycle manual and via timer - Stepless motor speed adjustment via variator gearbox - Manually adjustable eccentric imbalance weights - Container with polyurethane lining – lining partially damaged or worn - Sound-insulated lid - Manual separation flap - Built-in screening device after the separation flap - Liquid connection - Material discharge opening 180 x 150 mm - Control cabinet for wall mounting - Baffle lid with perforated screen Space requirement with base L x W x H 1800 x 1750 x 1700 mm Net weight approx. 1800 kg In good condition Function description: Codpjfqpxiefx Abnjpt Workpieces and abrasive media are set in motion by the generated vibration and are recirculated extremely gently. The constant relative movement between workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Condition: new, OPTIMUM OPTIsaw S275N metal band saw - Exhibition machine - Feed infinitely adjustable, tiltable ----- Technical data ----- Cjdpfxou R S Hpj Abnopt Swivel range: 0 - 60 °, Cutting height: 150 mm, cutting depth: 230 mm, Saw blade speed: 45 / 90 m/min, Saw blade length: 2,480 mm, Motor 400 V: 1.1 kW, Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Weight: 185 kg - new exhibition machine -

Condition: excellent (used), Vertical band saw JAESPA type MSU 4roller diameter 420 mmoutreach 400 mmtable size 615 x 615 mmcutting height 350 mmsaw blade length min. 3450 - max. 3640 mmsaw blade speed 20-2500 m/min. stepless mains connection 400 volt, 50 Hz - stepless saw band speed over 2 motor speeds, 2 gear stages and stepless belt drive - saw table swivelling - 2 gear stages - saw blade butt welding machine IDEAL BS 0-16- saw blade shear - grinding stone for grinding the weld seam space requirement L x W x H 1100 x 950 x 2000 mmWeight approx. 700 kgsehr good, immediately operational condition2 identical machines in stock Cpsdpjd Tx D Usfx Abnjt

Condition: excellent (used), functionality: fully functional, table diameter: 400 mm, gear diameter: 400 mm, total width: 275 mm, spindle speed (max.): 500 rpm, overall weight: 6,200 kg, The machine is in very good condition. 6-module with change gears and attachment head. Operating manual included. The machine is under power. Cpsdoxzn Atopfx Abnst

Condition: used, Year of construction: 1976, turning diameter over bed 0560 mm Cjdpfst Tqgxox Abnept turning diameter over slide rest 350 mm turning length 1500 mm spindle bore 65 mm spindle turning speed range 16- 1250 U/min feeds - longitudinal 0,050-24,0 mm/U feeds - cross 0,039-18,86 mm/U total power requirement 9 kW weight of the machine ca. 4,5 t

Condition: used, machine/vehicle number: 242350148, -WT 106- Offered here is a table drilling machine of the company Flott of the type TB23L. The table drilling machine stands on a special lifting table (no original lifting table). Technical data: - 6-fold speed adjustment (manual via belt pulley). - MK2 receptacle Cpodpslf Evcsfx Abnst

Condition: good (used), Year of construction: 1992, Automatic band saw JAESPA Type:W400 AZ Cedpfx Abogf H Saonjpt Control Minipos 807 year 1992 Cutting diameter round material max. 400mm Sägebandlänge:5500X32X1,1mm Feed automatic cut length min.20mm Chip conveyor Total power requirement 4 Kw Weight approx.2500kg Accessories 2X saw blades, roller table 6m motor drive, machine documentation available. Footprint : 2,8X2,8X2m