Used Winch for sale (1,212)

Condition: used, machine/vehicle number: YV2XZ22C8HA80xxxx, mileage: 403,000 km, Year of construction: 2017, Please contact ATS Norway for more information Please provide reference number upon request: 21704 Specifications: Km: Approx. 403,000 Gearbox: Automatic Full air suspension 6x2 with steering on 3rd axle Engine brake Decent tires On-Spot Euro 6, 419 hp Lrjdpfx Afoxt Dglozeg JOAB body 2 chambers Approx. 4 m³ for bio and 16.7 m³ rear Winch Bale clamp Reversing camera Botek scale and printer Radio/CD Climate/AC Service history from Volvo Ready for delivery Description:Volvo FM410 Refuse Truck from 2017.JOAB body with 2 chambers.Service history from Volvo.Ready for delivery. Km: 403000 HK: 418 Technical approved: no EU-approved until: 30.11.2025 Own weight: 16800 Total Weight: 27000 Payload: 10125 Width: 255 Length: 980 Euro: 6 Model: FM410 2-Kammers Renovasjonsbil Gearbox: Automatic

Condition: used, New: No Field of application: Construction Serial number: A00xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20517 Specifications: - Unknown model year - 5224 engine hours - 3049 hammer hours - Machine width: 225 cm - Vacuum cleaner - Rod holder - Winch - Pendulum on undercarriage - Undercarriage (see pictures) Lodpfx Aowph D Aefzsrg - Lights - Ready for delivery Description: We have a Tamrock DHA 400S drilling rig for sale. The drilling rig starts and runs, but there is something wrong with the engine. The cause is unknown. Apart from this, everything should work as it should according to the owner. Services have been taken by the owner himself continuously. Some additional costs must be expected. Ready for delivery. Own weight: Width: 255 Hammer hours: 3049 Engine hours: 5224 Model: DHA 400 S

Condition: used, Year of construction: 2008, operating hours: 4,105 h, CE mark: yes Serial number: 75xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21490 Specifications: 2008 model 4105.4 hours 17165 kg Certified to: 05/25 110 kW Tires (see pictures) Support paws Crew basket Lifting height: 24.1 meters Range 17 meters Radio control 1 manual pallet forks 1 hydraulic pallet forks Jib with winch (1.5 tons) Chains Climate Light Lrodpfexm Thrjx Afzjg Radio Ready for delivery   Description: We have a 2008 Manitou MRT2540 w/ radio control, crew basket, 2 sets of pallet forks, jib with winch (1.5 tons) for sale. Everything works as it should and all services have been taken by Hesselberg continuously. However, errors and shortcomings may occur as it is from 2008. Handsome Manitou used on construction sites for various lifting and moving jobs. Ready for delivery Hours: 4105 Own weight: 17165 Kw: 110 CE: Yes Model: MRT2540 m/ radiostyring, mannskapskorg, 2 sett pallegafler, jibb med vinsj (1.5 tonn)

Condition: used, machine/vehicle number: YV2RT60FXKA84xxxx, mileage: 5,874 km, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 20511 Specifications: 2021 model 7350 km (will go a little) 721 Engine hours 241 Crane hours Euro 6 engine 8x2 551 HP Suspension on 1st and 2nd axle: Steel Suspension on 3rd and 4th axle: air 2 x 110 liter variable pumps 2 x manual extensions for main boom and 2 x for jib Scanreco optical remote control (Top model) Weight cell main boom Additional function for main boom and jib Auto leveling (The car puts itself in a level position ready for lifting.) Virtual space (Possibility to limit all axes with a few keystrokes, no need to open a workshop for this. Brilliant when working under high voltage etc.) SKF central lubrication ring and up to the first link Extra function all the way up the jib Single winch hook (Jib / main boom) 2 shear winch hooks (Jib / main boom) 4-point winch hook (Main boom) Hook for jib Hook for main boom (Large hook) N d lower the generator (24 volts) Cable stop sensor and sleeve 4 ton winch Diagnostic cable for online help (Remote help) Danfoss valve center 2 x 2 ton counterweight (M is only used for cranes above the cabin, otherwise the counterweights are not needed, and these can be removed as needed) Front support leg   Structure: 4 x work lights strategically placed inside each outrigger cabinet. 50" LED bar work light at the rear of the cab Powerful LED lights in the crane. VBG mount, with air servo control unit mounted in rear cabinet left side. Roof rack 2 high beam LED bar on roof forward (daylight!!). Lrsdpswphixjfx Afzeg Orange work warning LED beam on the roof. EasyUp foldable ladder with side railing. Boxes for chains, screws, etc. Mounted on the rear support legs so that they are extended together with the support legs and are also packed away while driving. Charger for control in cabin Plastic inner fenders axle 3 and 4. 3 edge pull-out cabinet between axles 3 and 4 On the left side between axles 2 and 3, a large cupboard with a 500 W fan heater is installed for hanging clothes to dry, etc. Flat / bottom rear closed with alloxed aluminum door panels that are cut to fit the car perfectly, with rounded edges for a very professional look. CNC manufactured plates up the back of the cabin. Fully painted sides, cabin and stern. Crane rest cradle for operation without jib. 5 pcs support leg plates. 4 pcs 80x80x6 cm. placed in dedicated cribs at the back of the "plan" Right side large cabinet 1.2 x 1 meter Powerful LED reversing/rear work lights. The rear of the car was rebuilt with CNC manufactured plates, and beautiful LED taillights have been installed in several stages. Hatches strategically placed for access to relevant facilities under the building. Precisely cut out panels in side...

Condition: used, maximum load weight: 2,580 kg, overall weight: 3,500 kg, axle configuration: 3 axles, first registration: 06/2024, loading space length: 6,550 mm, loading space width: 2,050 mm, loading space height: 580 mm, Year of construction: 2024, Welcome to Nutzfahrzeuge West GmbH! NEW!!! Chat with our sales advisor via WhatsApp: .----Ideal for large maxi transporters such as Sprinter/Crafter ... or 2 small vehicles TECHNICAL DATA: * Trailer type Merkur XL * Storage box Lrodpfx Aoxvwy Rsfzog * Gross weight 3500 kg * Payload 2582 kg * Internal dimensions L: 655cm, W: 205cm * External dimensions L: 920cm, W: 210cm, H: 65cm * Loading height approx. 58cm * Floor: aluminum perforated plate * Lashing points in perforated plate * Frame: welded steel, hot-dip galvanized * Electrics: 13-pin, 12V * Tires: 195/55R10 * Axle manufacturer: AL-KO * Number of axles: 3 * Braked axles * Support wheel standard * Anti-sway coupling AL-KO AKS 3504 * Hand winch standard AL-KO * Suspension with shock absorbers incl. 100 km/h approval * Wheel chocks

Condition: new, empty load weight: 4,460 kg, maximum load weight: 14,540 kg, overall weight: 19,000 kg, axle configuration: 2 axles, suspension: other, tire size: 435/50 R 19,5, color: other, gearing type: other, front tire size: 435/50 R 19,5, rear tire size: 435/50 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-sided tipper, side walls 600 mm high, galvanized, loading height approx. 1,080 mm, 4 x lashing eyes each 5 t embedded in the floor, 8 x lashing eyes each 3 t embedded in the floor, reinforced gear support winch with load and fast gear at the front, 435/50 R 19.5, , chassis and tipper body hot-dip galvanized, , surcharge for:, aluminium ramps (approx. 3.500 long) and 2 rear folding supports, Price: 1.700 Euro , , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ljdeycvltepfx Afzorg

Condition: used, machine/vehicle number: WDB9066551S40xxxx, mileage: 116,002 km, Year of construction: 2010, Please contact ATS Norway for more information Please provide reference number upon request: 21702 Specifications: 2010 model 116,002 km Automatic transmission 190 hp 4x2 1 tractor included Inspection equipment Ex-approved Control panel Ac in office department Camera Winch Cable-operated Tires (see pictures) Rear view camera Climate Ac Radio Ready for delivery   Description: We have a 2010 Mercedes-Benz Sprinter 519 cdi R inspection van for sale. The car is well equipped for interior inspection. It comes with 1 tractor that can be built in different sizes. Control panel and cameras are included in the office section. There is also AC in the office department. An engine error code appears on the car's display. So errors and deficiencies may occur and some cost must be taken into account. Ready for delivery Km: 116002 HK: 190 Lredexzygwspfx Afzsg Technical approved: Yes EU-approved until: 28.01.2026 Own weight: 2562 Model: Sprinter 519 cdi Rørinspeksjonsbil

Condition: used, Year of construction: 2019, New: No Field of application: Construction Serial number: 03xxxx Lrodovg Hvaspfx Afzog Please contact ATS Norway for more information Please provide reference number upon request: 16463 Specifications: -2019 model - 2050 engine hours - 347 operating hours - Hc 95 Montabert hammer - 390 compressor hours - L5 Gps - Straight grinder - Rotabom - Winch - Central grease - 249cm machine width - 30 cm belt width - Range of 4.90m - 40cm2 drilling circle - Overcarriage can turn 360 degrees - Service history - Commuting on belts - Delivery by agreement Description: Great Stone Scout sold with few hours. Just had 1000 hours of service. Has a reach of 4.90 m and can drill approx. 40 cm2 in one space. Comes with L5 Gps and straight grinder. Delivery by agreement. Hours: 968 Width: 249

Condition: used, machine/vehicle number: YV2T0Y1A1JZ12xxxx, mileage: 361,000 km, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 22132 Specifications: EU approved until 24.01.2026 2019 model Lrsdpfx Afex Ty I Uszog Mileage: approx. 361,000 km (may increase) Full air suspension Automatic transmission Tires (see photos) Co-Me-Ar body from 2019 5.5-ton capacity Remote control Winch Wheel-lift (specs) Flatbed length: approx. 582 cm Euro 6 Overall length: 875 cm Width: 255 cm Wheelbase: 440 cm Curb weight: 9,900 kg Maximum payload: 6,025 kg 4x2 286 hp Tool box Tow ball Distance meters Rotating beacon bar Radio/CD Climate control / AC Description: 2019 Volvo FL280 recovery truck.Equipped with a 5.5-ton Co-Me-Ar body with remote control.Flatbed length approx. 582 cm.Ready for delivery. Km: 361000 HK: 285 Technical approved: Yes EU-approved until: 24.01.2027 Own weight: 9900 Total Weight: 16000 Payload: 6025 Width: 255 Length: 875 Euro: 6 Model: 2019 Volvo FL280 Bergingsbil m/ Co-Me-Ar Påbygg. Gearbox: Automatic

Condition: used, Year of construction: 1996, Serial number: 8xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21912 Specifications: 1996 model 1848 hours (I'm a little worried) 564 stroke hours 82 kW Weight: 8160 Machine width: 230 cm Ledpjxz N Ahjfx Afzjrg Winch Directional instrument Boart HD125 hammer Chassis Diesel heater Videos Ready for delivery Description: We have a 1996 Nemek 503 TXI drilling rig w/ low hours for its age for sale. Errors and defects may occur as the rig is from 1996. But the owner says it works as it should. It has few hours on the engine and hammer in relation to its age. Ready for delivery Own weight: 8160 Engine hours: 1848 Model: 503 TXI borerigg m/ lite timer i forhold til alder

Condition: used, machine/vehicle number: YV2J1F1C2AA69xxxx, mileage: 280,000 km, Year of construction: 2010, Please contact ATS Norway for more information Please provide reference number upon request: 20835 Specifications: Km: Approx. 280,000 Transmission: I-Shift Air suspension Euro 5, 419 hp Tires (see pictures) 6x2 with turn on 3 1 chamber NTM on construction Volume: 18.6 m clamp Winch Rotor beam Weight Printer Rear view camera Diesel heater Radio/CD Air conditioning/AC Bed Services are taken at local workshop Ready for delivery Description:Volvo FM410 1-chamber truck from 2010.The truck is equipped with NTM superstructure that takes 18.6 m.6x2 with 3 axle swing.Ready for delivery. Km: 280000 HK: 418 Technical approved: Yes EU-approved until: 17.09.2026 Own weight: 14565 Total Weight: 27000 Payload: 12360 Width: 255 Lrsdpfx Ajwvzfasfzjg Length: 920 Euro: 5 Model: FM410

Condition: used, Year of construction: 2018, Serial number: 4xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20805 Specifications: 2018 model Engine hours: Approx. 3500 Hammer hours: Approx. 19000 Weight: 11,100 kg Chassis (see pictures) Belt width: 25 cm Total width: 220 cm Rod shifter New depth gauge Vacuum cleaner Winch Service history 2 track guides are being replaced before sale Ready for delivery Lrsdpfx Aowvzrmofzog Description:Well maintained Sandvik DINO 400 Drilling Rig.The rig is from 2018 and has had approximately 3500 engine hours.Equipped with rod changer and new depth gauge.Ready for delivery. Own weight: 11100 Model: Dino DC400RI

Condition: used, machine/vehicle number: WDB9523361K73xxxx, mileage: 150,000 km, Year of construction: 2004, Please contact ATS Norway for more information Please provide reference number upon request: 20804 Specifications: - 2004 model - EU-approved until 15.05.2026 - Km: approx. 92000 - 8x8 - Length: 1060 cm - Wheelbase: 170/310 cm - 476 hp - 2004 SWS body - Retarder - Tires (see pictures) - Air on boogie - Suspension: steel - Rear winch capacity: 35 tons and 2 winches of 25 tons - Front winch capacity: approx. 9 tons (owner uncertain) - Danesrumpe - Approx. 4 meters rear extension - Compressor - Remote control - New alternator (replaced last year) - High-pressure washer Lredpfx Afjwvy Tvezsg - Cold and hot water - Heating in all cabinets - Central locking in all cabinets - Sink - Refrigerator - Sandblasters - Light tower can be raised 3 meters - Warning lights can be raised 3 meters - Flashers - Camera on the side and rear - Spreading nozzle on the cameras - Webasto - AC/climate - Bed - What is permanently mounted in the cabinets is included - Fastening systems, brackets and some chains are removable - Can come with winter tires with studs for an additional price. - Video available - Delivery by agreement Description: 2004 Mercedes Actros 4448 8x8 heavy-duty truck with SWS body. There are 3 winches in the back. 2x 25 tons and one of 35 tons. The 35-ton winch can be used, but the owner says it should be replaced. Everything that is permanently mounted in the cabinets is included plus some chains. The owner believes the water tanks are around 400 liters per tank. A new alternator was replaced last year for around 42,000 NOK Light tower can be raised. The Tungberger is going to have a major service in Finland, so the mileage may increase. The car has been used very little and the previous owner left it in storage for 10 years. Km: 150000 HK: 476 Technical approved: Yes EU-approved until: 15.05.2026 Own weight: 29020 Total Weight: 56000 Payload: 26905 Width: 255 Length: 1060 Euro: 3 Model: Actros 4448

Condition: used, machine/vehicle number: ZCFC670D50544xxxx, mileage: 160,000 km, Year of construction: 2022, Please contact ATS Norway for more information Please provide reference number upon request: 19857 Specifications: EU-approved until: 10.01.2027 Certified until: 06.2026 Model year: 2022 Mileage: Approximately 160,000 km (will increase as the vehicle is in use) Transmission: Manual 2 sets of tires on rims New winter tires Body: Isoli body from 2022 Frame winch Tow bar Plan length: 5 meters Powerful compressor Euro 6 engine Length: 777 cm Width: 230 cm Wheelbase: 435 cm Curb weight: 4,460 kg Drivetrain: 4x2 Engine power: 180 hp Tool box Tow hitch Radio/CD Air conditioning/AC Ledpfx Aev U Sayofzsrg Rotor beam Towing meter Extended warranty to 200,000 km or 5 years Description: 2022 Iveco 70C18 recovery vehicle with Isoli body. The vehicle has been well-maintained and comes with an extended warranty of 200,000 km or 5 years. It is equipped with 2 sets of tires on rims and is ready for delivery. Delivery can be arranged as needed. Km: 160000 HK: 180 Technical approved: Yes EU-approved until: 10.01.2027 Own weight: 4460 Total Weight: 7200 Payload: 2665 Width: 230 Length: 777 Euro: 6 Model: 70C18 Bergingsbil m/ Isoli påbygg Gearbox: Manual

Condition: used, operating hours: 4,500 h, Field of application: Construction Serial number: 30xxxx Please contact ATS Norway for more information Lrodpfoxvlc Tsx Afzog Please provide reference number upon request: 21752 Specifications: Hours: approx. 4500 Capacity: 20 tons Winch Tires (see pictures) Outriggers New batteries Description:Kato KR-20 mobile crane with approximately 4500 hours.The crane is functional but no longer certified (last certified 11/2023).20-ton capacity.There is a contact fault in the horn, so it does not make a sound when the crane is extended.Can be delivered at short notice. Hours: 4500 Own weight: Model: Kato KR-20 Mobilkran SE VIDEO -

Condition: used, Year of construction: 2004, Field of application: Construction Serial number: 04085xxxx Please contact ATS Norway for more information Please provide reference number upon request: 15082 Specifications: Model year: 2004 Hours: Approx. 10,000 hours (Hour counter has stopped) Chassis: See pictures Belt width: Approx. 40 cm Equipped with winch Includes Dynaset generator Services: Performed both by the owner himself and at the workshop Remote control Ready for delivery M l: Length: 6.00 meters Height: 2.70 meters Width: 2.32 meters Weight: 12.6 tons Ljdpfx Asvg Nt Ijfzerg Description: The hour meter has stopped, but the owner estimates that the machine has run approx. 10,000 hours. The engine was replaced 2 years ago and has only run 500 hours since the change. Drills 193 mm holes and the included equipment includes a drill bit and 120 meters of rods for immediate use. The machine is equipped with a 4-cylinder Deutz engine that only has 500 hours on it after engine replacement. It is ready for delivery and ready for work. Please contact us for more information or a viewing! Hours: 10000 Own weight: 12600 Model: 55S

Condition: used, Year of construction: 2019, operating hours: 2,000 h, Please contact ATS Norway for more information Please provide reference number upon request: 21753 Specifications: Model year: 2019 Hours: approx. 2000 Base ballast Remote control Counterweights: 3 × 3600 kg and 6 × 1100 kg Hook height: 30 m (3 × 10 m sections) Jib length: 55 m Undercarriage: stationary on ZD4230 Hoisting winch: 25LVF 15 Optima Trolley winch: 6 DVF 4 Optima Slewing mechanism: RVF 152 Optima+ Lrjdpfx Aexvlh Nefzeg Last assembled: 2022 Without cab Hours: 2000 Own weight: 111 Model: MDT 109 2C Tårnkran

Condition: excellent (used), functionality: fully functional, mileage: 265,170 km, power: 162 kW (220.26 HP), first registration: 02/2011, empty load weight: 4,900 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 4,200 mm, fuel: diesel, gearing type: mechanical, emission class: euro5, suspension: steel-air, loading space length: 5,400 mm, loading space width: 2,500 mm, Year of construction: 2011, Equipment: cable winch, trailer coupling, MAN TGL 8.220 / Trailer / Winch / Remote control / Payload: 8,290 kg • Manufacturer: MAN • Model: TGL 8.220 • Mileage: 265,170 km • First registration: 02/2011 • Power: 162 kW / 220 hp • Winch: Ramsey, electric • Radio remote control • Trailer hitch • Loading ramps • Loading platform: 5.40 meters • Axle configuration: 4x2 • Wheelbase: 4.20 meters (between 1st and 2nd axle) • Transmission: 6-speed manual • Suspension: leaf/air • Differential lock • Capacity: 3-4 cars • Euro 5 emission standard • Curb weight: 4,900 kg • Payload: 2,590 kg • Gross vehicle weight: 7,490 kg ----- Trailer • Manufacturer: Silver • Model: SRBP10 • First registration: 02/2006 • Loading platform: 9.70 meters • Suspension: air/air • Curb weight: 4,300 kg • Payload: 5,700 kg • Gross vehicle weight: 10,000 kg • German vehicle Lredpfoxwbw Aox Afzog • German documents • Immediately available for operation • This offer is non-binding and subject to prior sale. - Intermediate sale reserved - Errors and/or typographical mistakes excepted - Sale in accordance with our general terms and conditions.

Condition: excellent (used), functionality: fully functional, empty load weight: 144,500 kg, maximum load weight: 33,050 kg, overall weight: 47,500 kg, loading space length: 17,200 mm, loading space width: 2,550 mm, loading space height: 3,300 mm, total length: 17,200 mm, Year of construction: 2000, Goldhofer STZ L3 35/80 / Winch / Extendable by 5.40 m / 3 steered axles Lodjxy Smaspfx Afzsrg • Manufacturer: Goldhofer • Model: STZ L3 35/80 • First registration: 02/2000 • Hydraulic ramps • Hydraulic winch • 3 steered axles • Total length: 17.20 m • Loading platform length (without extension): 8.40 m • Telescopic extension: 5.40 m • Total loading platform length: 13.80 m • Loading platform height: 0.83 m • Transport width: 2.55 m • Transport height: 3.30 m • Fifth wheel height: 1.33 m • Fifth wheel coupling point: 8 cm • Ramp length: 4.60 m heavy-duty ramps • Unladen weight: 14,450 kg • Payload: 33,050 kg • Gross vehicle weight (GVW): 47,500 kg • German vehicle • German documents • Immediately operational • This offer is non-binding and subject to prior sale. - Subject to prior sale - Errors and/or typographical mistakes excepted. - Sale according to our terms and conditions.

Condition: new, empty load weight: 3,490 kg, maximum load weight: 8,110 kg, overall weight: 11,600 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,430 mm, suspension: steel, tire size: 355/60 R 18, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 355/60 R 18, rear tire size: 355/60 R 18, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way side tipper, side walls 600 mm high, galvanized, + lattice extension 1,000 mm high, width tires 355/60 R 18, loading height approx. 970 mm, central locking for side and rear drop sides, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 12 x strong lashing eyes recessed in the floor, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, rear stanchions pluggable, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, contour marking according to ECE R 048 regulation, , surcharge for aluminum ramps load capacity 10 t per pair and 2 x folding supports, rear, ramps suitable for steel track vehicles and rubber tyres, price: 1.500 Euro, , -- Misprints, errors and changes excepted, sample pictures --, More data under: !, More Details: ! Lrodpfx Aeya Ir Hofzjg

Condition: new, empty load weight: 3,960 kg, maximum load weight: 10,440 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,420 mm, suspension: steel, tire size: 385/55 R 19,5, color: other, gearing type: other, front tire size: 385/55 R 19,5, rear tire size: 385/55 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-sided tipper, loading area length approx. 5,700 mm, side walls 600 mm high, galvanized, + lattice attachment 1,000 mm high, loading height approx. 990 mm, 4 x lashing eyes in the floor 5 t each, 8 x lashing eyes in the floor 3 t each, reinforced geared support winch with load and fast gear at the front, ?Wide tyres: 385/55 R 19.5, Chassis: Hot-dip galvanized, , Surcharge for:, Aluminium ramps (approx. 3,520 x 400 mm) load capacity 10 t per pair and 2 folding supports at the rear, Price: 1,500 Euro , , , -- Misprints, errors and omissions excepted, Sample pictures --, More data under: !, More Details: ! Lsdpfoya Ir Tsx Afzorg

Condition: new, empty load weight: 4,580 kg, maximum load weight: 14,420 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,420 mm, loading space height: 1,100 mm, loading space volume: 15 m³, suspension: other, tire size: 435/50 R 19,5, color: other, gearing type: other, front tire size: 435/50 R 19,5, rear tire size: 435/50 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading area approx. 5,700 mm x 2,420 mm, 600 mm drop sides + 500 mm extension drop sides, hot-dip galvanized drop sides, loading height approx. 1.080 mm, 12 x lashing eyes in the floor, reinforced gear support winch with load and fast gear at the front, 2 times folding supports at the rear, 435/50 R 19.5, , Chassis and tipper body hot-dip galvanized, , Surcharge for:, Aluminium ramps , Price: 1,600 Euro, , -- Misprints, errors and omissions excepted, Sample pictures --, More data under: !, More Details: ! Ljdpeya Itdofx Afzjrg

Condition: new, empty load weight: 3,280 kg, maximum load weight: 7,220 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, loading space height: 900 mm, loading space volume: 11 m³, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ledoya Itkepfx Afzerg

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic tailgate opening when tipping backwards, side boards with spring relief, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed in the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear, 45 degrees to the sides, infinitely height-adjustable drawbar, removable stakes at the rear, gear support winch with load and quick mode, front-mounted, integrated compartment for two aluminum loading ramps in the chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- subject to printing errors, mistakes and changes, sample images --, More data under: !, More Details: ! Ledpfx Asya Itqefzerg

Condition: new, empty load weight: 3,210 kg, maximum load weight: 8,690 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,000 mm, loading space width: 2,000 mm, suspension: other, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height loaded: 590 mm, reinforced steel checker plate floor, 2 x ramps (2,600 mm long x 900 mm wide), 10 lashing eyes (2 t) on the outer frame, 8 lashing boxes (5 t) in the corners, geared support winch with load and fast gear, front, 2 times folding supports, rear, , Chassis and body hot-dip galvanized, , Surcharge for support frame for cutter belt 600 ¤, Also with mechanical ramps in stock! , -- Misprints, errors and changes excepted, Sample pictures --, More data under: !, More Details: ! Lredpeya Irysfx Afzog