Used Spring Wind for sale (7,406)

Condition: used, Year of construction: 1972, Technical details: wire diameter - max.: 12 mm wire diameter - min.: 2,0 mm control for program: Process Controler Total power requirement: 18,5 kW Weight approx.: 10,5 t dimension machine xH: 2,6 x 1,8 x 2,7 m dimensions LxWxH: Schmiermittelanlage: 0,6 x 0,4 x 0,8 m dimensions electric cabinet LxWxH: 0,5 x 1,2 x 2,1 m dimensions of coil: 2,6 x 1,8 x 2,7 m WRAIGHTING AND CUTTING MACHINE from the manufacturer Wafios-Hack Also called spring coiling machine, for the production of right and left hand tension / compression springs. Feed length 17400 mm Spring Ø 120 mm Output range: Yield 1 - 70 pieces/min. Spring Ø 25 - Ø 200 mm Wire thicknesses round steel Ø 5.0 - 140 mm and square steel 5.0 - 12.5 mm Feed speed - spring length max. 42,000 mm and wire feed F1= 40 m/min. + F2= 28 m/min. + F3=20 m/min. currently mounted on the machine: 6 feed rollers for wire intake Ø 4 mm to produce the end product: tension spring wire Ø 4 mm, outer Ø 34 mm and length at 135 mm Dcsdpfju Ic Hnox Acpon Operation via control panel, Process Controler BRANKAMP Equipment: Lubricant system Wire reel reel Switch cabinet cooler reel Optional accessories and/or spare parts see photo i.D. *

Condition: excellent (used), wire diameter - max. 2,5 mm Dcedjyrtwljpfx Acpsn

Condition: excellent (used), wire diameter - max. 2 mm Dcjdpfxsyrhmne Acpen

Condition: excellent (used), wire diameter - max. 5 mm Dedpfsyr Si Hox Acpjcn total power requirement 7,5 kW

Condition: used, Technical details: wire diameter - max.: 9,0 mm wire diameter - min.: 2,0 mm voltage: 380 V / 50 Hz V control voltage: 220 V Total power requirement: 18 kW Weight approx.: 5,0 t dimensions: Schmiermittelanlage: 830 x 650 x 1000 mm dimension machine approx.LxWxH: 3,3 x 1,5 x 1,45 m dimensions electric cabinet LxWxH: 0,7 x 1,5 x 1,75 m WIRING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right and left-hand tension and compression springs as well as torsion springs. The springs can be produced with any pitch and shape of spring body. Djdpevc Aklefx Acpecn Output max. 90 pieces/min. Outer spring Ø 10 - 120 mm Unlimited wire feed length, speed = 27 - 80 m/min. Coiling device: two-finger system wire thickness Ø 2.0 - 9.0 mm; spring outer Ø Ø 10 - 120 mm Single-finger system: wire thickness Ø 3.0 - 7.0 mm; spring outer Ø max. Ø 60 mm Equipment: 5x feed rollers, wire holder 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire roller holder POST, motor-driven, mandrel holder Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit Optional many accessories and/or spare parts! i.D. *

Condition: new, The CT 25 (Ø 0.2 to 2.5 mm) replaces and/or complements the 25TS, which operates with a cam system. This machine has between 11 and 16 axes, details of which are given below: - 8 independent slides - wire feed - nozzle rotation - servo spinner OR lateral movement of winding finger Optional (up to 5 additional axes) - servo cutter - servo spinners (additional) - lateral movement of winding finger - transfer for raising the second (German-type) extension spring eye. Maximum feed speed: 121 m/min. Slide travel: 50 mm Machine dimensions: 1.30 x 1.46 x 1.68 m. Machine weight: 900 kg. Dcedpfsvbd Ezjx Acpsn If you have any further questions, please do not hesitate to contact us.

Condition: new, The CR 35 (up to Ø 3.5 mm) completes the range between the CR 23 (up to Ø 2.3 mm) and the CR 45 (up to Ø 4.5 mm). The machine has between 12 and 16 axes, below are the 12 basic axes: - wire feed - wire rotation - nozzle rotation - servo spinner - 8 independent slides (8 axes) Optional (up to 4 axes): - servo cutter - servo spinners (additional) - lateral movement of winding finger - transfer for lifting the second (German-type) extension spring eyelet. Maximum feed speed: 54 m/min. Machine dimensions: 2.36 x 2.10 x 2.10 m. Machine weight: 2,300 kg. Dodpfx Acjvbdq Repecn If you have any further questions, please do not hesitate to contact us.

Condition: used, Spring actuated self-levelling pallet turntable, capacity 2000 kg Spring actuated turntable, which keeps palletised loads at an optimal working height, using a system of calibrated springs and shock absorbers. No power source or compressed air required. Dodpfx Aozz Ranecpocn Lowers the risk of fatigue and injury. Reduces the time taken for loading and unloading pallets by over 40%. Fitted with fork pockets for easy relocation. Smooth running ball bearing turntable, which eliminates the need to walk around or stretch over the unit. Height 240mm (compressed), 710mm (extended). Turntable dia. 1100mm. Weight: 160kg. CE marked.

Condition: excellent (used), INSTRON Spring Testing Machine / Universal Testing Machine SPRING SF1392-E1-L12-SPL Professional 100 kN testing machine for spring, compression, and material testing For sale is a used spring testing machine from the manufacturer INSTRON. The system was designed for highly precise spring, compression, and material testing. It is ideally suited for use in testing laboratories, research and development, quality assurance, and industrial manufacturing. Technical data: Manufacturer: INSTRON Type: SPRING Model: SF1392-E1-L12-SPL Serial number: SPRGK4348 Year of manufacture: 2007 Testing force: 100 kN Power supply: 240 V AC / 1~ / 50–60 Hz Line current: 25 A Control voltage: 24 V AC / 50–60 Hz Max. ambient temperature: 40 °C Dimensions: Machine (W × D × H): approx. 1,307 × 757 × 2,392 mm Sliding door with 0 mm additional opening space Base Extension Model: 2910-061 Dcsdpfx Aozlp Ixecpen Weights: Testing machine: approx. 1,145 kg Base Extension: approx. 96 kg 5800 Controller: approx. 31.8 kg Total weight: approx. 1,273 kg 5500 Controller: Dimensions (H × W × D): 650 × 280 × 570 mm Weight: approx. 31.8 kg Equipment: 100 kN testing frame Protective enclosure with sliding door Base Extension Model 2910-061 Instron 5500 Controller Control console Industrial PC Monitor Keyboard Mouse Emergency stop system Testing platens / compression tools as shown in the images Technical documentation as shown in the images Application areas: Spring testing Compression testing Material testing Component testing Load testing Material testing Quality assurance Testing laboratory Research & Development Scope of supply: Instron SPRING SF1392-E1-L12-SPL Base Extension Model 2910-061 Instron 5500 Controller Control console Testing platens / compression tools as shown in the images Machine accessories as shown in the images Technical documentation as shown in the images Important note: To operate the system, the original Instron testing software including a valid software license is required. The software and the software license are not included in this offer. According to the manufacturer, a corresponding retrofit is required for re-commissioning. A functional test could not be performed due to the missing software. Therefore, the sale is preferably aimed at specialist companies for re-commissioning or retrofitting. Condition: Used Optical condition as shown in the images. Normal age-related signs of wear are present. The workbench shown in the photos is not included in the sale. The control console and the machine accessories shown are included in the scope of supply. Transport information: Original shipping dimensions according to the manufacturer: 2,795 × 1,600 × 1,295 mm (L × W × H) Shipping weight according to the manufacturer: approx. 1,565 kg Loading by forklift is possible. Shipping by freight carrier is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone or e-mail.

Condition: used, Year of construction: 2006, functionality: fully functional, mandrel diameter: 76 mm, roll diameter: 1,250 mm, product width (max.): 2,000 mm, Web width 2000 mm Unwinding diameter 70 / 76 Parent roll diameter 1250 mm Weight of parent roll 2000 kg Rewinding diameter 76 Maximum roll weight 400 kg Minimum core length 40 mm Number of spindles 2 Speed up to 600 m/min Dcjdpfx Ajzvx Uvscpen Power consumption 70 kW Material PE / PP, 13-300 µm

Year of construction: 2020, condition: like new (used), functionality: fully functional, The A.Celli Stream in Line 668 is a complete industrial in-line slitter winder designed for integration into medium- and low-throughput production lines for nonwoven fabrics and composite materials. The machine performs longitudinal web slitting and surface-driven winding of finished rolls. The slitting system uses 12 circular-knife units operating with band counter-knives mounted on a motorized expanding shaft. The configuration includes a motorized S-wrap, a motorized SUS supporting roller, edge-trim extraction, shaft supports, a bar acceleration mechanism and a roll holder. The web is guided through bowed spreader rollers to reduce wrinkles and folds. The machine is equipped with AC drives, a control cabinet, an operator panel, a desktop computer with monitor and industrial communication via Profinet and Ethernet TCP/IP. Manufacturer: A.Celli Nonwovens S.p.A. Machine type: Stream in Line Machine version: 668 Serial number: 2020026 Year of manufacture: 2020 Application: Longitudinal slitting and winding of nonwoven fabrics and composite materials Winding design: Surface driven Production speed: 200 m/min Web threading speed: 10 m/min Cross-cutting system: Circular knife Longitudinal slitting system: Band counter-knives on a motorized expanding shaft Number of slitting units: 12 Edge-trim extraction: Yes Number of shafts: 4 Shaft diameter: 3″ Drive system: AC motors Motorized S-wrap: Yes Motorized SUS supporting roller: Yes Shaft supports: Yes Bar acceleration mechanism: Yes Roll holder: Yes Drive side: Left Operator side: Left Control cabinet side: Left Operator panel colour: RAL 7035 Control cabinet colour: RAL 7035 Length: 6200 mm Width: 5550 mm Height: 3045 mm Total weight: 16,000 kg Supply voltage: 400 V Number of phases: 3 Auxiliary AC voltage: 230 V DC control voltage: 24 V Frequency: 50 Hz Power supply earthing system: TN Protection rating of power cabinets: IP55 Electrical reference standard: IEC 60204-1 Cable entry into cabinets: From below PLC communication: Profinet Field communication: Ethernet TCP/IP PLC software: TIA Portal Operator computer: Desktop computer with monitor Compressed-air pressure: 6 bar Air consumption during web threading: 4500 Nl/min Air consumption during normal operation: 700 Nl/min Air consumption during the change cycle: 2000 Nl/min Cable routing: In floor ducts Operating temperature: +15°C to +40°C Storage temperature: +25°C to +55°C Relative humidity: Below 80% Dedpfezudfdsx Acpscn Maximum operating altitude: 1000 m Equivalent continuous sound pressure level LEQ: Below 85 dB A-weighted sound power level LWA: Below 83 dB Installed drives: Transmission roller, S-wrap roller, slitting unit, SUS roller, accumulation shaft The machine comes from an industrial nonwoven production facility and is offered as shown in the photos. A detailed PDF with the complete technical specification of the machine is available upon request. We will be happy to provide it to seriously interested customers. Additional photos and further information are also available upon request. Price: on request / negotiable. Please contact us for further information.

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, Spring & Hydraulic Cone Crusher: Design, Operation, and Technical Insights Cone crushers are vital in mining, metallurgy, and aggregate production, designed for secondary and tertiary crushing of hard and medium-hard materials. Among the most common types are the spring cone crusher and the hydraulic cone crusher, each offering distinct advantages in structure, performance, and control. Spring Cone Crusher The spring cone crusher is a traditional design that uses mechanical spring systems for overload protection. When uncrushable material enters the crushing chamber, the spring mechanism allows the bowl liner to move downward, preventing damage to the crusher. Once the foreign object passes, the springs restore the original position, ensuring continuous operation. Structural Composition: Main frame and base assembly Eccentric shaft and transmission system Fixed and moving cones (mantle and concave) Spring and adjustment mechanism Working Principle: Material is fed into the crushing chamber and compressed between the mantle and concave. The laminated crushing principle ensures that particles are crushed by both impact and pressure, producing uniform and well-shaped aggregates. Technical Highlights: Feed size: ≤300 mm Dcodpfxetxhybo Acpjn Discharge size: 3–60 mm Capacity: 30–700 t/h Motor power: 75–400 kW Advantages: Simple structure, low maintenance cost, stable performance, and reliable overload protection. Applications: Widely used in crushing granite, basalt, iron ore, copper ore, and limestone. It is suitable for medium-scale operations where cost efficiency and durability are priorities. Hydraulic Cone Crusher The hydraulic cone crusher is an advanced evolution of the spring design, integrating hydraulic systems for improved automation, safety, and precision. It replaces the mechanical spring system with hydraulic cylinders that control the discharge opening and provide overload protection. Structural Composition: Main frame and eccentric assembly Hydraulic cylinders and control system Crushing chamber with optimized liner design Automatic lubrication and hydraulic adjustment units Working Principle: The hydraulic system adjusts the discharge opening and releases pressure automatically when uncrushable material enters. This prevents mechanical damage and allows the crusher to resume operation quickly. The combination of high-speed eccentric motion and optimized chamber geometry enhances crushing efficiency and product quality. Technical Highlights: Feed size: ≤320 mm Discharge size: 3–50 mm Capacity: 45–1200 t/h Motor power: 90–630 kW Advantages: Automatic cavity cleaning, precise control, high crushing ratio, and superior particle shape. Applications: Ideal for large-scale mining, aggregate production, and high-demand crushing lines requiring consistent output and minimal downtime. Comparative Overview Both crushers operate on the same compression principle but differ in control and automation. The spring cone crusher offers simplicity and cost-effectiveness, making it suitable for stable working conditions. The hydraulic cone crusher provides advanced control, faster adjustment, and higher efficiency, ideal for modern, large-capacity plants.

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: PET09622A, Automatic winding and packaging machine for flexible spiral hoses, pipes, corrugated hoses, and hoses with an outer diameter of 8 mm to 40 mm. After winding, the coil is wrapped with stretch film and, if necessary, automatically labeled by the label printer. The total of six loading units are loaded with hose sections and wound up one after the other. The package includes a wide range of spare parts. These include: Omron servo axle drives, trailing cables for drives and valve terminals, various pneumatic components, drive belts, sensors, etc. Capacity: 60 coils/hour Min. inner diameter of coil: 200 mm Max. inner diameter of coil: 380 mm Max. outer diameter of coil: 850 mm Min. width of coil: 120 mm Max. width of coil: 340 mm Dcsdpswd Emwofx Acpsn The technical data sheet can be found below the images; the operating instructions are attached.

Year of construction: 2021, condition: like new (used), functionality: fully functional, Component 1: ATM-800 P Tangential Dereeler (2 pieces) Heavy-duty dereeler for controlled unwinding of copper wire coils. • Max. coil diameter: 800 mm • Max. coil width: 300 mm • Pickup hole: Ø52 / Ø56 mm • Max. coil weight: 300 kg • Braking force: 100 - 2000 N • Brake torque: 3 - 800 Nm • Max. speed: approx. 5 rpm • PLC control with torque sensor Component 2: HBK-40-S Automatic Taping Machine Professional automatic taping machine for coil and conductor insulation. • Servo-controlled taping head • Operator terminal and display • Integrated X-axis guidance • Electric hysteresis brake • Automatic overlap control via encoder • Suitable for various insulation materials Dsdpfx Ajz Ap R Iecpecn

Year of construction: 1995, condition: ready for operation (used), A defective CNC spring coiling machine BB Spring (Babbio) is available. Wire thickness range: 3mm-8mm, max. outer diameter: 120mm, wire processing speed: 90m/min, power: 35kW, machine dimensions X/Y/Z: approx. 2750mm/3150mm/2700mm, weight: approx. 4000kg. Including a winch plate for winching left springs and a torsion spring device. The motor and drive of the machine are defective. Documentation available. Dodpfxovripmo Acpecn

Condition: good (used), Year of construction: 1975, functionality: fully functional, total width: 1,900 mm, roll diameter: 1,800 mm, overall weight: 3,100 kg, product width (max.): 1,900 mm, input voltage: 440 V, Slitter rewinder 190 wide DC motors Shaftless input with hydraulic platform to raise the web, the system supports core sizes ranging from 3 inches up to 12 inches and processes of 150 to 1900 mm width webs, output core sizes ranging from 3 to 12 inches  Dcjdpfx Asy Ufkqocpon

Year of construction: 2015, condition: ready for operation (used), machine/vehicle number: Nº 6 Y Nº 7, Equipment: CE marking, WINDLASER LS1626 Plus 150 W Industrial CO₂ Laser Machine Approximate working area: 2,600 × 1,600 mm – Complete equipment, ready for production Unit price per machine: €7,900 + VAT For sale: WINDLASER LS1626 Plus 150 W industrial CO₂ laser cutting and engraving machine, currently in operation at our facilities and available for demonstration before dismantling. The machine is being sold exclusively due to a technological upgrade, following the introduction of new, state-of-the-art RF industrial laser equipment. It is equipped with a professional Ruida DSP controller, RDWorks software, and comes with a computer, fully configured for immediate operation. Its large working area of approximately 2,600 × 1,600 mm allows for the comfortable machining of entire MDF, HDF, plywood, acrylic, cardboard, leather, foams, rubbers, and other non-metallic materials. The machine incorporates a fully operational 150 W RECI laser tube, and is also supplied with a brand new 150 W RECI laser tube, providing the buyer with a significant reduction in future maintenance costs. Included equipment Dcsdpfx Aszmqa Eecpon The price includes: • WINDLASER LS1626 Plus 150 W industrial laser machine. • Approximate working area of 2,600 × 1,600 mm. • Ruida DSP industrial controller. • Computer with RDWorks installed and configured. • S&A CW-6000 industrial chiller. • Installed and functioning RECI 150 W laser tube. • Brand new RECI 150 W replacement laser tube. • Complete new optical head. • Two spare high-voltage power supplies. • Three industrial fume extractors. • New cable carrier chain. • Various additional spare parts. _____ Materials that can be processed Ideal for cutting and engraving: • MDF • HDF • Plywood • Acrylic (PMMA) • Cardboard • Leather • Rubber • Technical foams • Non-metallic plastics • Other materials compatible with CO₂ laser technology A purchase with guarantees The machine can be seen in operation before dismantling. The buyer can personally verify its operation, precision, speed, and cutting quality, acquiring industrial equipment ready to continue producing from day one. _____ More than just a used machine It is delivered as a complete industrial production system, including strategic spare parts and high-value accessories that significantly reduce future maintenance costs, minimize the risk of production downtime, and allow you to start manufacturing from day one with complete confidence.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3769, total width: 1,667 mm, roll diameter: 1,067 mm, overall weight: 1,360 kg, product width (max.): 1,067 mm, input voltage: 460 V, ROTARY SHEAR SLITTING STATION: The rotary shear slitting station is a modular design allowing detachment from the main frame. The powered 60mm (2.367 inch) diameter upper and lower knife shafts drive the male and female shear knife assemblies. The male and female shear knife assemblies may be positioned anywhere within the web area and are held in position by eccentric locking keys. The removable male shear knife shaft assembly is mounted to a rigid dovetail bar assembly. The dovetail bar assembly is adjustable axially for shear knife face contact pressure and rotationally for knife overlap. A two-position lock lever assembly is used to rotate the dovetail bar assembly 900to the open position for removal of knife shaft assembly or closed in the slitting position. Rotary shear drive speed is proportional to web speed or manually controlled by the operator. REWIND: The slit web is alternately rewound on the duplex air expanding rewind shafts. Flange mounted rewind shafts provide ease of change to other desired types or diameters. The outboard rewind support swings open for removal of finished rolls from the cantilevered rewind shafts. Dcjdpey Ufgxjfx Acpjn

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: JB00001227, 92x GE Renewable Energy Yaw Drives – Bonfiglioli & NGC – P/N 448W3942P001 We are offering Bonfiglioli Trasmital yaw drive planetary gearboxes manufactured for GE Renewable Energy wind turbine applications. A total of 48 identical units are available in stock. The listed price of USD 2,000 is the price per unit. Buyers may purchase one unit or any required quantity. There is no obligation to purchase the complete stock. These gearboxes are used in the yaw system of a wind turbine to rotate and position the nacelle according to the direction of the wind. The high reduction ratio converts the electric motor input into low-speed, high-torque rotational movement required for controlled nacelle positioning. Some units may have been partially disassembled for easier and safer transportation. For example, the electric yaw motor may have been separated from the mechanical gearbox. All corresponding components are complete, and the separated parts can be reassembled. Technical specifications: 92 GE Renewable Energy yaw drives available for sale in Turkey. •⁠ ⁠64 Bonfiglioli yaw drives •⁠ ⁠28 NGC yaw drives •⁠ ⁠GE P/N: 448W3942P001 •⁠ ⁠Bonfiglioli VMN: JB00001227 •⁠ ⁠36 units complete with electric motors •⁠ ⁠56 mechanical yaw drives without motors •⁠ ⁠NGC units equipped with 5.5 kW electric motors •⁠ ⁠Units were supplied/used in sets of 4 per turbine •⁠ ⁠From a GE wind turbine fleet in the 1.7–3.2 MW range •⁠ ⁠Production year: 2020 •⁠ ⁠Location: İzmir, Turkey •⁠ ⁠Total quantity available: 92 units Available individually or as a complete lot. Dodoznu Rqepfx Acpocn Photos, videos and additional technical information available upon request. The products may show signs of long-term storage and transportation, including paint wear, dirt, minor surface oxidation and corrosion on exposed machined metal surfaces. The units are offered in their current condition as shown in the photographs. The components are complete. However, the electrical and mechanical testing status should be confirmed before purchase. Completeness of the components should not be interpreted as confirmation that every unit has been functionally tested. Individual serial numbers, additional photographs, dimensions, weight information and detailed scope of delivery can be provided upon request. The units are available for individual or multiple-unit purchases. Customers may order any quantity according to their requirements. Price: USD 2,000 per unit Available stock: 48 units Minimum order quantity: 1 unit Delivery terms: FCA seller’s warehouse, Türkiye, Incoterms® 2020

Condition: used, The lot consists of 1 coiling machine. Additional technical data can be provided upon request. Offers must be submitted for consideration. Dcodpfx Acoy Txhaspsn

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Robot, stud welding robot for M5 threads (convertible), KUKA KR 180 KRC2, complete Control system: KRC2 Number of axes: 6 Max. payload: 180 kg Max. working range: approx. 2700 mm Year of manufacture: 2003 Scope of delivery: Robot, control system, cables, teach pendant, wiring diagrams, stud welding unit Used – normal signs of wear and tear. Further details, article numbers and images available upon request. Two weeks commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. Dcedpfx Ajz I R R Djcpon The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT stated. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to foreign countries on request – Please specify country, city and postal code. Freight costs on request – Please specify the delivery address.

Condition: excellent (used), mileage: 145,343 km, first registration: 05/1989, fuel type: diesel, fuel: diesel, color: other, gearing type: mechanical, loading space length: 5,800 mm, loading space width: 2,500 mm, loading space height: 1,540 mm, Year of construction: 1989, = Additional options and accessories = - PTO = Remarks = WMAE68ZZZYL021198 = More information = Tipper: Back Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Dcodeymrivjpfx Acpen Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Bosch winding head assembly machine You are purchasing a high-quality winding head assembly machine for armature production. Dcsdsg Ibyrepfx Acpon The primary application area is armature production. Manufacturing/production/operating documentation is included with the machine. Complete factory closure, large selection of storage platforms, pallet racking, shelving systems, paternoster lifts. High-quality industrial machines, lathes, grinding machines, hand tools. More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 08/1986, suspension: steel, tire size: 385/65-R22.5, Year of construction: 1989, = Additional options and accessories = - Leaf suspension - BPW axles - Drum brakes = Remarks = 1989 SHLADOT 20FT swap chassis with multi-leaf (4-leaf) spring suspension, BPW axles with drum brakes, 20FT, 385/65-R22.5 tyres (Left: 4/2 mm; Right: 8/8 mm), unladen weight: 2,970 kg, gross vehicle weight rating: 28,000 kg, Belgian registration with valid technical inspection until: 23.04.2026 = Further information = Axle configuration Axle brand: BPW DRUM Brakes: Drum brakes Suspension: Leaf suspension Rear axle 1: Tyre size: 385/65-R22.5; Max. axle load: 9,000 kg; Left tyre tread: 50%; Right tyre tread: 25% Rear axle 2: Tyre size: 385/65-R22.5; Max. axle load: 9,000 kg; Left tyre tread: 50%; Right tyre tread: 50% Weights Djdpfx Acow I Dkujpocn Unladen weight: 2,970 kg Payload: 25,030 kg GVWR: 28,000 kg Functional Body manufacturer: SHLADOT SD 90 Condition Technical condition: good Visual condition: good Additional information Please contact Arne Honingh for more information.

Year of construction: 2017, condition: ready for operation (used), Six identical Demsan fabric doubling and winding machines are offered. Max. fabric width: 2000mm, fabric infeed: from roll and in open width, fabric delivery book/roll: 1000mm, double folded, max. operating speed: 60m/min, operating direction: forward, control: Hitech touch panel. Machine dimensions X/Y/Z: 4000mm/3100mm/2600mm, weight: approx. 2390kg. Equipped with fabric tension control, electronic length measuring system with encoder, calibration function, RS-232 interface, end-of-fabric photocell, photocell-controlled fabric catcher and centering system, dancer roller mechanism, Argox thermal printer, photocell-controlled edge guiding system, motorized fabric guide adjustment, AC geared motors, frequency converters and pneumatic opening unit. Four machines were manufactured in 2017, and two machines were manufactured in 2016. Documentation available. Inspection possible by arrangement. Dcedezta Eqjpfx Acpon