Used Wind Protection for sale (24,534)

Condition: good (used), Year of construction: 2002, Manufacturer: BRÜCK Tip: 12/1600 Load capacity: 12000 kg Max sheet width: 1600mm Coil diameter: 1800mm Hodpfohrnbkox Ad Donw Weight : cca 14 t Without control cabinet!

Condition: good (used), Year of construction: 1991, Very good condition. Fully overhauled in 2023. Flat handle unit installed. The machine offers both 1-ply and 2-ply operation modes. It is equipped with slit equipment for the bag bottom formation. Bag width (without handle): min. 160 mm – max. 320 mm Bag width (with handle): min. 250 mm (between handle centers) – max. 320 mm Bag gusset (without handle): min. 60 mm – max. 180 mm Bag gusset (with handle): min. 250 mm (between handle centers) – max. 180 mm Bag cutting length (without handle): min. 350 mm – max. 610 mm Bag cutting length (with handle): min. 350 mm – max. 580 mm Hnodpfx Aexfl Izjd Dew Roll width: min. 460 mm – max. 1020 mm Maximum roll diameter: outer layer – 1500 mm / inner layer – 1300 mm Core diameter (paper roll): 76 mm Paper grammage: 1 ply – 50-120 gsm / 2 ply – up to 100 + 80 gsm (as produced) Number of forming plates (for bag width): 7 Forming plate sizes: 160, 180, 240, 260, 280, 300, 320 mm Gear sizes (for cutting length): 35, 36, 41, 45, 48, 50, 55, 56, 57, 58, 62 Approximate production speed with handle: 100 pcs/min Approximate production speed without handle (1 ply): 150 pcs/min Approximate production speed without handle (2 ply): 120 pcs/min Total electrical load: 25 kW Paper roll loading mechanism: automatic for outer layer, by forklift for inner layer Machine dimensions (W x L x H): 4.5 m x 13 m x 3.3 m

Year of construction: 1994, condition: good (used), Max reel diameter 1600mm Die gap 1.25-2.26 Hnedpfsp Du A Tex Ad Dow Die diameter 350mm Thickness 25-130 micron Speed 250kg/hr

Year of construction: 1992, condition: ready for operation (used), An injection molding machine with two units Klöckner Ferromatik Desma GmbH, Windsor plant Maintal is available. Stroke volume: 2x30150cm³, clamping force: 40000kN, injection pressure: 1800bar, cooling water requirement: 2x18.1m³/h, total power requirement: 2x700kW. Weight clamping unit: 2x175t, weight injection unit: 2x50t, total system weight: 450t. On-site inspection is possible. Hjdpov T Aqajfx Ad Dsnw

Condition: ready for operation (used), bottom wrapper Hedpfxed Hrpqj Ad Djnw

Condition: not inspected (used), Coiling machine for rewinding coils / sheet metal strip. Coiler outer diameter: 1200 mm. Hnodpfx Ajgu Nymed Djw Variable positions: horizontal and vertical. Hydraulically tilt operated with air brake. More coilers on stock: Soprem, ALO Teknik, Kohler, Bruderer, Rapid Air. As well servo feeders and used flash butt welding machines Ideal BAS 100, Ideal BAS 050, Ideal BAS 120...

Condition: ready for operation (used), Year of construction: 1986, clamping force: 27 kN, screw diameter: 175 mm, Injection molding machine WINDSOR (Germany ) Type: W2700 Year of construction : 1986 with a revision in 2018 Clamping force: 27000 kN (2700to) Opening stroke: 2180 mm Installation height: 500 mm Hnodpfot Eat Sox Ad Djw Vertical clamping dimension: 2750 mm Horizontal clamping dimension: 1900 mm Distance between vertical tie bars: 1400 mm Horizontal tie bar spacing: 2240 mm Centering DS / AS: 250 mm Max. injection volume: 15,300 / 48,000 ccm screw diameter: 175 mm The machine can be inspected under power. ___ Our general terms and conditions apply, and the seller is not liable for typing or data transmission errors. The appearance of the items on offer corresponds to their age and the pictures shown. The technology and wear of the items on offer are in keeping with their age. Used machines are sold exclusively to traders and without warranty.

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, working width: 1,420 mm, Year: 1986 Width/mm: 1420 Thickness/µm: 14-400 Material: PO, PE, paper, HDPE, LDPE Hnedexcy Hyopfx Ad Dow Detail: Plant consists of: 2x Fife edge trim control 2x Ahlbrand MFD 2000 pre-treatment units (year 2001) 1x Print Concept UV unit type PC 2w-1600-2x1 (year 2001) Coating unit with individually temperature-controlled rollers. Sleeve system D: 76mm. Several spare parts included.

Condition: used, Year of construction: 1994, Film width: 1500 mm Thickness range: 25-200 Dosing system: Summit Garvimetric Screw: 90 mm Heating zones: 5 Heating power: 64 kWt approx. Driving system: D.C.11-110 KW Power: 415 Die head: fixed Diameter die head: 350mm Diameter of the gap: 1.25 to 2.25 IBC – yes Air ring type: optifil Die lip gap diameter: 2-50 Calibrating basket: yes with Ultrasonic control Motorized adjusting of calibrating basket in diameter / high: yes Take-off system: Oscillating Number of rolls: 2 Web guiding system: Yes Hnsdowgcw Sopfx Ad Dow Final roll width: 1650 mm Final roll diameter: 1000 mm Final roll maximum weight: 1 t Rewinder speed: 100 Thickness Control System: Optifil Micro perforator: no Filter changer: Yes(hydraulic) Electrical requirements: 400 A PLC: Siemens Simatic S5-100 U Trim removal system: Rollers Yes-Extract No

Year of construction: 2015, condition: reconditioned (used), Agfa Avantra 25,30,44 Spinners -Agfa Avantra 25 spinner, 25.000 RPM, 20.000 RPM -Agfa Avantra 30 Spinner, 30,000 RPM -Agfa Avantra 44 spinner, 13,500 RPM -Agfa GalileoCTP Spinner, 37,500 RPM Hnodpfx Adefm U Edj Dow

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,200 mm, total length: 1,200 mm, total height: 1,550 mm, overall weight: 270 kg, electrical fuse: 16 A, input voltage: 400 V, power: 7.5 kW (10.20 HP), drive type: Elektromotor, TUKWIND BASIC 7 add-on air classifier with special fan impeller and solid housing design. Our smallest suction fan is suitable for extraction at one suction point. Ideally suited for fine fraction cleaning, Styrofoam extraction, and small screening machines up to 4m drum length. - Optionally can be supplemented with our PUSH blowers to increase efficiency. - Easy expansion option as a spot extractor with 10m hand suction hose. Facts: - Compact separation system for mounting on existing screening technology (mobile & stationary) - High suction power - continuously adjustable thanks to built-in frequency converter - Electric drive, hence very low maintenance costs - 7.5kW power requirement; Power plug: 32A CEE (16A fuse sufficient) Hnodpfxewhfqws Ad Dsw A wide range of applications is made possible by the robust construction and individual adaptation to conveyor belts, etc. Fields of application: construction waste recycling (Styrofoam, plastic films), composting (plastic films), RDF cleaning (plastics), and more. The device can be purchased either separately or as a complete set. The set includes all necessary accessories such as: extraction hood, hoses, bends, quick clamps, net, etc.

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, Machine for making paper bags with square bottom Bag width: 45 mm - 125 mm Tube length: 150 mm - 340 mm Gusset: 30 mm - 75 mm Photocell Hnsdpow Nvi Ssfx Ad Dow Max reel width: 400 mm In-line 4-color flexo printing unit

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,600 mm, total length: 1,600 mm, total height: 2,150 mm, overall weight: 1,140 kg, electrical fuse: 63 A, input voltage: 400 V, drive type: Elektromotor, Attachment wind sifter TUKWIND PRO 18. The combination blower with suction and compressed air in one station. - Compact separation system for attachment to existing screening technology (mobile & stationary) - High suction and compressed air performance – infinitely adjustable by built-in frequency converter - Electric drive, therefore very low maintenance costs - 18.5kW power requirement; power plug: 63A CEE Hjdpfxowhfgre Ad Denw A wide range of applications is enabled by the robust design and individual adaptation to conveyor belts, etc. Ideal size for drum screening machines of the 5-6m class: (SM518, SM620, T5, T50, T6, T60, MAXX, Nemus, Cribus 2800, Cribus 3800, and more) Fields of application: construction waste recycling (Styrofoam, plastic films, wood chips, hard plastic pieces), composting (plastic films), RDF cleaning (plastics), brick chipping cleaning, and more.

Condition: used, Year of construction: 2007, Tenoning spindle 3 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Control 100 PC SCM Windor 100 CNC still in operation, available for inspection until the end of December 2025 ----- Powerful and flexible CNC manufacturing system for windows and doors Processing of workpieces up to a maximum length of 4500 mm, width of 250 mm, and thickness of 150 mm Consists of a Windor 60 model B Infeed conveyor Slotting section: ----- Item 1: Miter saw ----- - Motor 4 kW - 3000 rpm - Spindle diameter 40 mm - Maximum tool diameter 400 mm, bore 80 mm Item 2: 1st slotting spindle ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 3500 rpm - Maximum tool diameter 370 mm - Locking device "Jolly" Hsdpow Im Iisfx Ad Denw - Continuous vertical positioning - Interpolating rotations, automatic inclined window adjustment +/- 60 degrees Item 3: Electric spindle with HSK 63 F tool holder ----- - Min/max. Rotation speed 1000-12000 rpm - Maximum motor power 11 kW - Water cooling - Rapid 24 automatic tool changer with 24 positions Item 4: 2nd slotted spindle ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 3500 rpm - Maximum tool diameter 370 mm - "Jolly" locking device - Continuously variable vertical positioning - Interpolating rotations, automatic inclined window device +/- 60 degrees Item 5: 3rd slotted spindle ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 3500 rpm - Maximum tool diameter 370 mm - Locking device "Jolly" - Continuous vertical positioning Fleximat ----- Including left and right stops with horizontal CNC adjustment for the following through-feed operations: Lock case milling and 9-degree anuba drilling from the right. Dowel drilling and strike plate marking from the left and right, 7 spindles each. Cup hinge drilling and olive drilling from the top. Profile part ----- Item 5: Power 2000 F4: Electric spindle with HSK 63 F tool holder ----- - Working from the left - Min/Max. Rotation speed 1000-18000 rpm - Maximum motor power 12 kW - Water cooling - Rapid 24 automatic tool changer with 24 positions Item 6: 1st profile spindle from the right ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 6000 rpm - Tool diameter min./max. 130-250 mm - Continuously variable vertical positioning - Continuously variable horizontal positioning Item 7: 2nd profile spindle from the right ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 6000 rpm - Tool diameter min./max. 130-250 mm - Continuous vertical positioning - Continuous horizontal positioning Item 7: 3rd profile spindle from the right ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 6000 rpm - Tool diameter min./max. 130-250 mm - Continuous verti...

Condition: used, Year of construction: 2008, The cable pulling winch 50/03 is primarily used in cable duct installations and empty conduit routes, all steel components are galvanized, rope length approx. 350 m. The vehicle may be wrapped and/or labeled with advertising. Hnodpfxexvwg Rj Ad Dew Our offer is generally without a new TÜV inspection. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops! The vehicle may be wrapped and/or labeled with advertising. Our general terms and conditions of delivery and payment apply. We are happy to prepare a financing or leasing offer for this unit. Please contact us!

Condition: excellent (used), functionality: fully functional, mileage: 265,170 km, power: 162 kW (220.26 HP), first registration: 02/2011, overall weight: 7,490 kg, axle configuration: 4x2, empty load weight: 4,900 kg, fuel: diesel, wheelbase: 4,200 mm, gearing type: mechanical, emission class: euro5, suspension: steel-air, loading space width: 2,500 mm, loading space length: 5,400 mm, Year of construction: 2011, Equipment: cable winch, trailer coupling, MAN TGL 8.220 / Trailer / Winch / Remote control / Payload: 8,290 kg • Manufacturer: MAN • Model: TGL 8.220 • Mileage: 265,170 km • First registration: 02/2011 • Power: 162 kW / 220 hp • Winch: Ramsey, electric • Radio remote control • Trailer hitch • Loading ramps • Loading platform: 5.40 meters • Axle configuration: 4x2 • Wheelbase: 4.20 meters (between 1st and 2nd axle) • Transmission: 6-speed manual • Suspension: leaf/air • Differential lock • Capacity: 3-4 cars • Euro 5 emission standard • Curb weight: 4,900 kg • Payload: 2,590 kg • Gross vehicle weight: 7,490 kg ----- Trailer • Manufacturer: Silver • Model: SRBP10 • First registration: 02/2006 • Loading platform: 9.70 meters • Suspension: air/air • Curb weight: 4,300 kg • Payload: 5,700 kg • Gross vehicle weight: 10,000 kg • German vehicle • German documents • Immediately available for operation Hsdpsxwbw Aefx Ad Denw • This offer is non-binding and subject to prior sale. - Intermediate sale reserved - Errors and/or typographical mistakes excepted - Sale in accordance with our general terms and conditions.

Year of construction: 2005, operating hours: 4,205 h, condition: used, 2005 | Westeria WindSifter on tracks | Used Screen | 4205 hours 📍Location: Belgium, Gouvy 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 43000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 72 inspection points 56 approved ✅ 15 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Hedsxuwwtspfx Ad Denw Good, machine was in working condition at the time of inspection. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "35089 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, complete plat concisting of: Bi-rail overhanging conveyor with two points bar support , lift and rotation unit Spray booth for robot with full recirculation, with autimatic pre-filter replacment system High pressure humidificer for spray booth and flash off room Robotic spray system for windows with jacket nozzle cleaning unit automatic color change (3 independent ) electrostatic safty system paint flow meter Hnjdpfx Adoxw Ux He Dew drying tunnel with ldp system and axial fans supervisor systeem with data interface and datamic reader “The line is packed for transport. It has been previously installed, but it has never been taken into operation.”

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm Hnsdpjt R T Hcsfx Ad Dsw - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: new, functionality: fully functional, power: 235.36 kW (320.00 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x4, fuel: diesel, color: red, gearing type: automatic, Year of construction: 2025, Equipment: air conditioning, airbag, all wheel drive, differential lock, parking heater, trailer coupling, From our immediately available stock of new vehicles, we offer you: TLF 4000 All-Wheel Drive – 6,000 l water tank mounted on an off-road-capable MAN TGM 18.320 all-wheel-drive chassis with winch Hsdpfx Ajxw Rcnod Dsnw If you require more water, crew capacity, and equipment, our TLF 6000 is the right choice. The red giant also makes a great impression off-road. And if others reach their limits, the powerful front winch provides assistance. Chassis: • MAN TGM 18.320 4x4 EURO 6 with 320 HP (235 kW) and automatic transmission • Off-road tyres, twin tyres on rear axle for high driving stability • 100 kN front winch Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Standard 4 BA brackets in the crew compartment Body: • High-quality frame construction made from stainless and corrosion-free materials • Fold-out steps for each lateral equipment compartment • Individually customised equipment storage made from stainless steel • Walkable, non-slip vehicle roof Vehicle Pump / Extinguishing Agent Tank: • Maintenance-free combined normal/high-pressure pump FPN 4000-10 • Pump & Roll capable • Output: 4,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, infinitely variable foam proportioning system • 6,000 l water tank with integrated 600 l foam agent tank • Additional heater in the pump room Firefighting Equipment: • High-pressure rapid intervention line with 50 m rigid hose • Foam/water monitor 2,000 l/min on vehicle roof • Self-protection system with 4 spray nozzles in front of the wheels Safety and Lighting: • LED lightbar on vehicle roof / 2 LED front flashers • Pneumatic Martin-horn special signalling system • 100 W loudspeaker system with PA unit • Reversing camera • Comprehensive LED lighting in the crew and all equipment compartments • LED area lighting on the body and auxiliary spotlights • Pneumatic LED light mast with remote control • Hygiene board available on request We are happy to provide a detailed quotation and present the vehicle to you personally at our Berlin location. All information is given to the best of our knowledge; no guarantee of completeness or accuracy. This advert does not constitute a binding offer but serves for information purposes only. Subject to prior sale!

Condition: used, mileage: 93,962 km, power: 324 kW (440.52 HP), first registration: 01/1983, overall weight: 34,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: mechanical, total width: 2,500 mm, total height: 3,600 mm, Equipment: crane, Heavy all-wheel drive 8x8 tractor for heavy trailer loads, recovery work, etc., torque converter transmission WSK, rear trailer load 100,000 kg, front coupling for pushing, 2 x Rotzler recovery winches each with 200 KN (40,000 kg.) rope length approx. 50 m, 1 x Rotzler self-recovery winch with 80 KN (8,000 kg) rope length approx. 55 m, 1 x Rotzler auxiliary winch for pulling out the two ropes of the recovery winch 6 KN (600 kg) rope length approx. 100 m, 1 x Palfinger loading crane PK 8200A at 2.5 m = 3150 kg, at 7.7 m = 970 kg, loading area approx. 3650 mm, side wall height approx. 680 mm, loading space for ballast and recovery equipment, approx. 13,000 kg Steel and ballast weight, climbing ability at 20% approx. 110,000 kg, tank approx. 400 + 210 liters, 10 cylinder turbo water engine, wading ability 800 mm, top condition, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment conditions apply. Hnjdpjvnp Dpjfx Ad Dsw We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: excellent (used), functionality: fully functional, mileage: 381,412 km, power: 163 kW (221.62 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, overall weight: 11,990 kg, empty load weight: 7,235 kg, maximum load weight: 4,755 kg, first registration: 01/2013, next inspection (TÜV): 10/2025, loading space length: 5,700 mm, loading space width: 2,800 mm, emission class: euro5, suspension: steel-air, brakes: engine braking, Year of construction: 2013, Equipment: air conditioning, cable winch, DAF LF 45/Sliding Platform/Tow Bar/Winch • Manufacturer: DAF • Model: LF45 • Mileage: 381,412 km • First registration: 01/2013 • Power: 163 kW / 222 HP • Drive configuration: 4x2 • Transmission: Manual gearbox • Engine brake • Recovery supports • 2x Winches • Tow bar • Suspension: leaf/air • Body: Valinski ETV5001R • Platform length: 5.70 m • Platform width: 2.80 m • Air conditioning • Cruise control • TÜV valid until 22 October 2025 • Unladen weight: 7,235 kg • Payload: 4,755 kg • Gross vehicle weight: 11,990 kg • Emission standard: EEV 1 • German vehicle • German documents Hjdpfexgt Nvox Ad Denw • Immediately operational • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos excepted. - Sale in accordance with our general terms and conditions.

Condition: new, Year of construction: 2017, Item description: Hjdpfx Ajxwdcusd Djnw SW ball screw X-axis 50x20x725 164-15-0001-132 + accessories ----- Condition of the item: The device comes from a company liquidation. Unused warehouse stock. Internal number: 992

Condition: used, mileage: 93,962 km, power: 324 kW (440.52 HP), first registration: 01/1983, overall weight: 34,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: mechanical, total width: 2,500 mm, total height: 3,600 mm, Equipment: crane, Heavy all-wheel drive 8x8 tractor for heavy trailer loads, recovery work, etc., torque converter transmission WSK, rear trailer load 100,000 kg, front coupling for pushing, 2 x Rotzler recovery winches each with 200 KN (40,000 kg.) rope length approx. 50 m, 1 x Rotzler self-recovery winch with 80 KN (8,000 kg) rope length approx. 55 m, 1 x Rotzler auxiliary winch for pulling out the two ropes of the recovery winch 6 KN (600 kg) rope length approx. 100 m, 1 x Palfinger loading crane PK 8200A at 2.5 m = 3150 kg, at 7.7 m = 970 kg, loading area approx. 3650 mm, side wall height approx. 680 mm, loading space for ballast and recovery equipment, approx. 13,000 kg Steel and ballast weight, climbing ability at 20% approx. 110,000 kg, tank approx. 400 + 210 liters, 10 cylinder turbo water engine, wading ability 800 mm, top condition, vehicle can be covered with advertising and/or labeled Hnsdpfxevnp Axs Ad Dew Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment conditions apply. We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: used, mileage: 93,962 km, power: 324 kW (440.52 HP), fuel type: diesel, gearing type: mechanical, axle configuration: > 3 axles, overall weight: 34,000 kg, first registration: 01/1983, color: white, total width: 2,500 mm, total height: 3,600 mm, Equipment: crane, Heavy all-wheel drive 8x8 tractor for heavy trailer loads, recovery work, etc., torque converter transmission WSK, rear trailer load 100,000 kg, front coupling for pushing, 2 x Rotzler recovery winches each with 200 KN (40,000 kg.) rope length approx. 50 m, 1 x Rotzler self-recovery winch with 80 KN (8,000 kg) rope length approx. 55 m, 1 x Rotzler auxiliary winch for pulling out the two ropes of the recovery winch 6 KN (600 kg) rope length approx. 100 m, 1 x Palfinger loading crane PK 8200A at 2.5 m = 3150 kg, at 7.7 m = 970 kg, loading area approx. 3650 mm, side wall height approx. 680 mm, loading space for ballast and recovery equipment, approx. 13,000 kg Steel and ballast weight, climbing ability at 20% approx. 110,000 kg, tank approx. 400 + 210 liters, 10 cylinder turbo water engine, wading ability 800 mm, top condition, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment conditions apply. We would be happy to make you a financing or leasing offer for this object. Please contact us! Hnodpfx Adsvnp A Eo Dow