Used Window Frame for sale (21,289)

Condition: good (used), Remark: One deep web frame is designed for transverse storage of 2 Euro pallets, 2 skeleton containers or alternatively 2 IBC containers. Technical data of the deep storage frame : Manufacturer: SSI Schäfer Design: Crosswise storage Included in delivery: Dedpfxepr T Une Ah Ujwd 01x depth bar frame, used material color: sendzimir galvanized for rack depth: 950 mm clear span: approx. 850 mm cross beam support: approx. 50 mm total width: approx. 2.680 mm bay division inside: approx. 1.295 x 950 mm Cross-connector: L: approx. 2,680 x 50 x 1.50 mm (LxDxH) Support angle: L: approx. 950 x 150 x 50 x 3.00 mm (LxDxH) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, length stop: 4,500 mm, tool diameter: 400 mm, spindle speed (max.): 6,000 rpm, controller model: Weinig Unicontrol 12, TECHNICAL DETAILS Cross-cut saw (electronic, horizontally adjustable, infinitely variable) Number of tools: 1 pc. Motor power: 3.7 kW Spindle speed: 3,000–6,000 rpm Spindle diameter: 40 mm Tool diameter: max. 400 mm Axial adjustment: 150 mm NC axis, electronically infinitely variable Radial adjustment: pneumatic, 8 positions (e.g. edge rounding from above) Rounding unit Position: horizontal bottom Axial adjustment: together with cross-cut saw Electronic length stop Length: 4,500 mm 1st & 2nd tenoning and slotting spindle Spindle diameter: 50 mm Spindle speed: 2,800–4,000 rpm Motor power: 15 kW Tool diameter: 380–400 mm Tool clamping length: 640 mm, with counter-bearing Axial adjustment: 580 mm NC axis, infinitely variable Tailstock counter (entire clamping length is counter-supported) 1st & 2nd profiling spindle Position: vertical right Spindle diameter: 50 mm Dwsdpfjxp U N Njx Ah Usd Spindle speed: 6,000 rpm Motor power: 11 kW Tool clamping length: 400 mm, with counter-bearing Tool swing diameter: min. 140 mm Tool swing diameter: max. 232 mm Axial adjustment: 350 mm NC axis, infinitely variable Radial adjustment: 80 mm NC axis, infinitely variable Profile milling unit (grooving unit from above) Spindle diameter: 40 mm Motor power: 3.0 kW Tool clamping length: 40 mm Axial adjustment: 30 mm NC axis, infinitely variable Radial adjustment: 125 mm NC axis, infinitely variable Spindle speed: 9,000 rpm Tool swing diameter max.: 130 mm 4th profiling spindle Position: vertical right Number of tools: variable Motor power: 11 kW Spindle diameter: 50 mm Tool clamping length: 400 mm, with counter-bearing Axial adjustment: 350 mm NC axis, infinitely variable Radial adjustment: 80 mm NC axis, infinitely variable Spindle speed: 6,000 rpm Tool swing diameter min.: 140 mm Tool swing diameter max.: 232 mm 5th profile milling unit (hardware spindle) Position: vertical right Motor power: 3.0 kW Spindle diameter: 40 mm Tool clamping length: 160 mm Axial adjustment: 115 mm NC axis, infinitely variable Radial adjustment: 100 mm NC axis, infinitely variable Spindle speed: 5,850 rpm Tool swing diameter max.: 210 mm 6th profile milling unit (grooving unit from above), in auxiliary stand Position: vertical right, operating from above Motor power: 3 kW Spindle diameter: 40 mm Tool clamping length: 40 mm Axial adjustment: 100 mm, 8 positions via pneumatic turret Radial adjustment: 80 mm, 8 positions via pneumatic turret Spindle speed: 5,850 rpm Tool swing diameter max.: 180 mm 7th profiling spindle (grooving unit from below) in auxiliary stand Position: horizontal bottom Motor power: 3 kW Spindle diameter: 40 mm Tool clamping length: 125 mm Axial adjustment: 100 mm NC axis, infinitely variable Radial adjustment: 100 mm NC axis, infinitely variable Spindle speed: 5,850 rpm Tool swing diameter max.: 200 mm MACHINE DETAILS Slotting spindle: 2 pcs. Number of milling units: 7 pcs. Control: Weinig PC-Nexus Weinig Unicontrol 12 INCLUDING used window tooling OERTLI IV 68, IV 78 wood and wood-aluminium Additional features can be found in the attached document! Note: The machine has already been properly dismantled.

Year of construction: 1999, condition: excellent (used), 1. Linck FWK Quick Clamp Carriage Gauge: 900 mm Travel speed forward/reverse: 80/180 m/min Clamp opening: 750 mm Log length: 2.5–13.5 m Log diameter: 150–700 mm 2. Linck CV1/SE 600 Full Frame Saw with Variable Width Adjustment Passage width: 760 mm Passage height: 710 mm Saw stroke: 600 mm 3. Removal Device Bm 1/Mbh Dodpfx Ahextwv Tj Uowd 4. Side Material Cross-Cut Saw Linck KA 1/ACF Year of manufacture: 1998. Commissioned: 2000 Various tools Sale by customer order.

Year of construction: 1998, condition: used, Technical details: profile width: 50 mm work height max.: 950 mm interface: RS 232 Pinout Window profile processing machine for materials such as plastic, aluminum and wooden windows in a continuous process. The materials are conveyed by a pneumatic transport and clamping system. The system consists of two work stations (machines), an electrical control cabinet, and a control panel and transport units. As well as columns with transport system vibrator, chip transport unit and column with receipt printer. Our photos are first taken from the location and then further pictures are how the plant is stored in our stock ready for transport. Workstation no. 1 (machine 1): -sawing station with saw blade Ø 400 x 4,5mm -drilling unit with clamping cartridge (vertical upwards) Dwedpfxju Ibuws Ah Usd -drilling unit with clamping cartridge (hotizontal) -Boring with clamping cartridge (vertical down) -twin drilling unit with clamping cartridge (vertical down) -45° drilling unit with clamping cartridge (upwards) Working station no. 2 (machine 2): -drilling unit with clamping cartridge (vertical upwards) -milling spindle horizontal with 11 side milling cutters -Drilling unit with clamping cartridge (vertical down) -Drilling unit with clamping cartridge (vertical upwards) -Drilling unit with clamping cartridge horizontal 2 transport units: motor driven -LxWxH: 5.650 x 2.400 x 1.000mm -track width 1.980mm 2 pieces transport units: motor driven -LxWxH: 2.150 x 2.750 x 1.050mm -track width 2.300mm *

Condition: used, Year of construction: 2000, Storage location: Nattheim Dwjdpfxsvwdmwo Ah Uod

Condition: used, Year of construction: 2012, total height: 1,450 mm, total length: 1,200 mm, total width: 800 mm, Type of fuel: Electric Drive: motorised Empty weight: 596 kg - Year: 2012 - Documentation available: No - Serial number: ME000659 - Drive: Electric - Type: Attachment - Transport dimensions: 1200mm x 800mm x 1450mm (l x w x h) - Transport weight [kg]: 596kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dwsdpfjwtm H Rjx Ah Usd Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: as good as new (ex-display), Technical data for the base plate: Shelving system: Nedcon Dwodjrfwyyepfx Ah Ujd Type: NS Year of manufacture: 2024 -new IMMEDIATELY AVAILABLE Included in delivery: 01x footplate, new Material color: RAL 5019 Capri blue Material thickness: approx. 5.00 mm Suitable for frame profile width: 120 mm Total width: approx. 220 mm Total depth: approx. 94 mm Total height: approx. 43 mm Distance between drill holes: approx. 180 mm Drill hole Ø: approx. 20 mm Weight/unit: approx. 1.020 kg General information about the item: This item is only offered for collection. Any other desired transportation or shipment of this item is associated with additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm Dwsdpfx Asxdttish Ued - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: new, Year of construction: 2024, functionality: fully functional, Pneumatic horizontal and vertical bed frame presses Standard solution suitable for frames 800-1000x1600-2000 mm. Dwjdpfeutbavjx Ah Ued

Condition: good (used), Year of construction: 1992, The bender is set up for aluminum, chromatech and plastic frames. Dwjdpfeqhugfsx Ah Uod

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Dodpfevvkmbjx Ah Uewd Storage location: Nattheim

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, We are selling our assembly table with pressure cylinder, fully functional and available for demonstration. 3.50 x 12.0 m, consisting of a placing table and a receiving table; the walls can be rotated without the need for a crane. Dwedpexufm Ajfx Ah Usd

Condition: good (used), We offer you here a used pass-through frame of the manufacturer Bito to the purchase. Included in delivery are: 01x pass-through frame, used Djdjg Nt Uzjpfx Ah Uewd Manufacturer: Bito material color frame: similar cream white/ sendzimir galvanized material colour rollers: anthracite segment length: approx. 2.700 mm Segment depth: approx. 1,350 mm track spacing: approx. 175 mm roller width: approx. 25 mm pitch: approx. 26 mm Diameter of rollers: approx. 25 mm Material rollers: plastic Bars per continuous frame: 16 pcs.

Condition: new, Year of construction: 2025, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm Dwjdpfx Ajg U Uv Rsh Uod -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: used, Tenoning spindle 1 St Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled ----- The machine was factory overhauled by Weinig in 2024. The control system was also upgraded to a Siemens S 7 677 C, with a new membrane panel "Touch". With the following machining units: Crosscut saw ----- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ----- Axially adjustable with crosscut saw Tenon and slotting spindle ----- Motor power 15 kW Spindle diameter 50 mm Spindle speed 2,925 rpm Dwjdpfx Ahsxpi Due Ujd Tool travel radius min. 380, max. 400 mm Tool clamping length 640 mm Axially adjustable CNC axis Axially adjustable travel 580 mm Adjustment speed 100 mm/sec. 1. Profile spindle (up- and down-rotation) ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis 2. Profile spindle ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis Profile milling unit horizontally mounted on top ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 9,000 rpm Pneumatically adjustable to 8 axial and radial positions Profile milling unit vertically mounted on the right side Machine end ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 5,850 rpm Pneumatic adjustment to 8 axial and radial positions Additional accessories ----- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, including a positioned cross-cutting saw integrated into the control system. Studio window device, pivots 60° on both sides Double-part package with automatic separation and transfer Synchronization device with automatic window rebating Rebating carriage for rebating small sash widths Air conditioning unit in the control cabinet PC control NEXUS Automatic turning system Slat conveyor, including conveyor belt for returning the workpieces to the operator (Technical specifications according to the manufacturer - without guarantee).

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment. Especially designed for staircase construction, window manufacturing, and versatile applications thanks to pneumatic height adjustment. Angled dowelling and spindle drilling are easily achievable thanks to the swivelling drilling unit. - Motor with pole changing, two speeds - Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm - Motor start via convenient handle switch - Equipped with Röhm two-jaw chuck 1–20 mm - Linear laser for precise workpiece positioning - Drilling unit can swivel 65° left and right - Pneumatic adjustment of machining height; dowelling possible on two levels without resetting - Desired drilling heights can be set for each level via a digital counter; switching is then pneumatic from the front - Cross movement 340 mm, stepless or in 12 mm increments with indexing rail - Pneumatic clamping possible at any position, controllable from the front - Maximum height adjustment approx. 100 mm above table height - Drilling stroke approx. 200 mm - 2 pneumatic workpiece clamps, 1 clamp column repositionable to the front - 2 swivelling workpiece supports - Suction funnel - Center stop + 1 side stop - Fixed mitre stop - Length stop as round bar - Set of drill bits - Operating manual - CE mark - Machine was partially repainted due to existing paint splashes - Pneumatic hoses replaced Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. Dsdpfxoxmatne Ah Uewd The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse – see "other offers from this provider."

Condition: excellent (used), Maweg Frame Press Working length 3000mm Working height 200mm Foot width 95mm Number of vertical clamps 5 Number of side clamps 3 Hydraulic pump motor 2.2kw Dwedpfx Asvy A Uxeh Ujd

Condition: new, Bernardo Frame Press HRP 3000 Robust and torsion-resistant hydraulic frame press with high-quality pressure cylinders. Whether it is used for furniture or door production, block or frame gluing, the high pressing force of 2,000 kg per cylinder and precise, angle-accurate pressing of large-sized components enable all tasks to be carried out effortlessly. Technical Specifications Working length: 2,400 mm Working height: 1,550 mm Cylinder stroke: 95 mm Pressing force: 2,000 kg Vertical hole pitch: 50 mm Dwsdpfxexrnvbe Ah Uod Horizontal hole pitch: 160 mm Overall length: 3,250 mm Overall height: 2,070 mm Frame depth: 925 mm Weight: approx. 315 kg Features • Versatile use, e.g. for frame, window, and door production • Robust frame press with solid steel construction • Centralized control of the hydraulic cylinders including pressure gauge • Efficient gluing thanks to hydraulic design • Pressure cylinders equipped with rocker plates as standard Scope of Delivery • 4 movable pressure beams, each with one vertical hydraulic cylinder and counter support • 1 movable pressure beam with two horizontal hydraulic cylinders • 1 movable, adjustable pressure yoke

Year of construction: 2025, condition: new, Big Bag rack Cross beam for Big Bag for forklift/crane Pneumatic discharge Aluminum container for material collection With sieve and suction connection with filter Dwodpfxoxnbk De Ah Usd

Condition: new, Year of construction: 2025, For sawing tubes and solid materials made of stainless and tool steelTwo band speeds by means of pole-changing motorRobust gear with hardened and ground shaftPrecise and robust band guides with adjustable carbide platesLonger service life of the saw band due to saw arm inclination of 25°Efficient coolant application to the saw band guidesElectromechanical monitoring of the saw band tension, In case of deviations, a microswitch switches off the machine chip clearing brush for optimum cleaning and maintenance of the saw band function of the semi-automatic machine:Automatic workpiece clamping after the start of the cutting cycleExecution of the saw cut at the selected band speedAutonomous stop of the lowering movement and of the saw band in the lower end positionAutonomous return movement of the saw arm to its upper end positionOperator only has to move the material automaticallyEquipment:Two band speedsCut-off buttonCoolant systemChips clearance brushSaw band tension monitoringSwivelling control panelLength approx.1860 mmWidth/Depth approx.1045 mmHeight approx.1750 mmWeight approx.405 kgPower consumptionPower consumption1.5 kWElectrical dataConnection voltage400 VMachine dataSaw blade speed(s)20 - 100 m/minSpeed steplessSaw blade length2720 mmSaw blade width27 mmSaw blade thickness0,9 mmSaw blade 60 - -45 °Cutting ranges0° round (tube) Dsdpfx Aed Hx Uqjh Uswd

Condition: used, Working width 3500 mm Working height 2550 mm Number of cylinders 6 St. loading dimensions L x W x H 4500x950x2900 mm Hess Speedy frame press ----- will be checked Insertion dimension / pressing length max. 3,500 mm Insertion dimension / pressing height max. 2,550 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 3 horizontal printing cylinders stroke 80 mm Dwedpfexnqw Tex Ah Ujd Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 2.2 kW / 400V Image and video not original, show identical model ----- (technical data according to the manufacturer - no guarantee!)

Condition: good (used), Year of construction: 2000, functionality: fully functional, The frame press is in good condition, professionally and conscientiously maintained. 3 vertical, 2 horizontal pressure cylinders, including pressing unit for angled elements Pressing pressure is finely adjustable Press width: 3450 mm, height 2250 mm Length 4350 mm, height 3000 mm, depth 800 mm Dwsdpfx Ajxgn E Sjh Ued Further information available via email or phone. Private sale, therefore no exchange, no warranty, and no guarantee. Sale is conducted with exclusion of any form of liability. No shipping.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2008 / 576, cutting height (max.): 250 mm, cutting width (max.): 150 mm, saw drive: 15,000 W, power: 15 kW (20.39 HP), warranty duration: 6 months, NEVA warranty includes plug & play equipment: - material guiding per choice: channels, center guide, side guide - 2 frames, 2 sets of saw blades and 2 sets of spacers - assembly frame and accessories - torque wrench, set of tools, etc. - complete revison of machine before leaves our factory The ORBIT Plus Thin Cutting Frame Saw was developed for cutting solid wood blocks into gluable slats with a minimum of saw kerf waste. Thin Cutting Frame Saw ORBIT utilizes a unique up/down method of movement for cutting veneer slats. Unlike conventional frame saws that move up and down in a lineal motion, the ORBIT Thin Cutting Frame Saw uses a patented swing-out motion at the bottom of the saw stroke. Dsdpfx Ahextm Rae Uowd Applications of use: Parquet and engineered flooring, doors, windows, stairs, furniture, musical instruments, pencils, sport equipment (ski, snowboards, hokey sticks), wooden-covers for fruit and vegetables, etc. This unique movement of Thin Cutting Frame Saw ORBIT has several distinct advantages over the frame movements on older, conventional frame saws. With a conventional frame saw, a great deal of heat is generated by sawdust that is captured/packed into and around the saw blade teeth. This occurs because the sawdust and wood chips are unable to clear out from the blade during the upstroke. This fact is especially true when cutting high, as some of the teeth in the center of the saw blades never clear out of the cut. Because the ORBIT saw frame moves out of the cut during the upstroke, wood chips and sawdust fall clear from the saw blades. The result is less heat build up on the saw blade, longer saw blade life, dust free slats, the ability to use a thinner kerf saw blade and first of all increased production capacity of the ORBIT frame saw.

Condition: ready for operation (used), total height: 2,110 mm, total width: 2,240 mm, total length: 900 mm, passage width: 1,500 mm, power: 2.2 kW (2.99 HP), empty load weight: 1,250 kg, load capacity: 125,000 kg, width of table: 420 mm movable cylinder electro hydraulic two speed: fast slow Dedpfsxgv Nfsx Ah Uswd Max ram adjustment: 400 mm Drawningspeed: fast 9mm/sec - slow 2,5 mm/sec Returningspeed: 12 mm/sec Max distance between table - ram: 925 mm Courant needed: 380/400V

Condition: used, Year of construction: 1978, machine/vehicle number: 4788, Capacity: 35 ton Throat depth: 225 mm Ram stroke: 8 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 325 mm Table surface area : 600 x 450 mm Slide area: 300 x 225 mm Number of strokes: 160 s.p.m. Required power: 2,2 kW Dimensions L x W x H: 1000 x 1600 x 2200 mm Weight of machine approx.: 1,9 ton Dedpfjw Tukiox Ah Uewd