Used Window Machine for sale (74,925)

Condition: used, Year of construction: 1974, bore capacity in steel (diameter) 32 (St 60) mm arm length 418 / 1018 mm workpiece height max. ca. 400 mm table surface area 1200 x 500 mm spindle taper MT 4 quill stroke 190 mm distance table - lower edge spindle 260 - 660 mm table height over floor 800 mm Nledpe Ad Rltefx Ai Aoh spindle turning speed range 41 - 1800 U/min feeds 0,1 / 0,15 / 0,2 / 0,3 mm/U total power requirement 6 kW weight of the machine ca. 1,8 t

Condition: used, Year of construction: 2009, travel distance X-axis: 4,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, table length: 4,100 mm, table width: 1,700 mm, table load: 12,000 kg, spindle nose: SK 50, Gantry Machining Center Nljdpfez Dby Ijx Ai Aoh Manufacturer: VTEC Model: VB-4020 Year of manufacture: 2009 Control system: Heidenhain iTNC 530 Technical details: X-axis: 4,100 mm Y-axis: 2,000 mm Z-axis: 800 mm Table dimensions: 4,100 x 1,700 mm Max. table load: 12,000 kg Number of tool stations: 32 positions Tool holder: SK 50 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Several wear parts on the machine have recently been replaced. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: good (used), Code: 0506 Brand: SAOMAD Model: UT 4 - CE Standard 4 Spindles tenoning machine for door and window frames, doors and windows - CE Standard Nodpo Ad Rcxjfx Ai Ajlh Safety guards CE Standard Cutter heads lenght mm 100 Max distance between 2 heads mm 0/68 Horizontal displacement of upper head mm 30 Working table width mm 420 Table and square inclination +- 45 degrees Disk saw diameter mm 250 Diameter of counter profile disk max mm 300 Router shaft diameter mm 35 - Motor Hp 4 Cutter heads and disk saw motor Hp 3 Pneumatic workpiece clamping Heads suction mouth diameter mm 120 Router suction mouth diameter mm 120 Disk saw suction mouth diameter mm 120 Overall dimensions mm 1700 x 1150 x 1400 h Weight kg 500

Condition: excellent (used), Year of construction: 2001, 1,000 shots used injection molding machine with robot, safety fence, and conveyor belt Manufacturer: DEMAG Type: ERGOTECH100/420-430System Year of manufacture: 2001 Clamping force: 100 tons Tie bar distance: 400 x 400 mm Screw diameter: 35 mm Max. injection volume: 168 cm³ Shot weight: 150 g/shot Control system: NC4 Equipment: - Robot, Engel, Type: W711-0174, Year of manufacture: 2009 - Safety fence - Conveyor belt Nsdpfxe Afbx Te Ai Aslh - 2 x core pull - Blow valve

Condition: used, Year of construction: 2002, functionality: fully functional, Manufacturer: KraussMaffei Type: KM 300-1400 C2 Machine type: Injection molding machine Year of manufacture: 2002 Machine no.: 254603 Machine weight: 12,500 kg Clamping force: 3,000 kN Control system: KraussMaffei machine control system with screen operation Operating hours according to display: 96,208 h Material supply: Material conveying/dosing components installed on the machine Hydraulics: Rexroth components visible Peripheral control: RMS Systems Touch Control available Conveying technology: Discharge/conveyor belt available Cooling unit 1: Frigel RCM80/6HP Year of manufacture, cooling unit 1: 2012 Voltage, cooling unit 1: 400 V Max. current, cooling unit 1: 17 A Refrigerant, cooling unit 1: R407C Refrigerant charge, cooling unit 1: 2.4 kg Weight, cooling unit 1: 200 kg Cooling unit 2: Frigel RCD80/12HP Year of manufacture, cooling unit 2: 2013 Voltage, cooling unit 2: 400 V Max. current, cooling unit 2: 29 A Refrigerant, cooling unit 2: R407C Refrigerant charge, cooling unit 2: 2.4 kg Weight, cooling unit 2: 240 kg Location: Freiburg Njdpfx Aiez Alpgj Aelh Available from APRIL 2027

Condition: used, Year of construction: 2003, operating hours: 6,659 h, functionality: fully functional, KraussMaffei injection molding machine KM 300-1400 C2, manufactured in 2003, with extensive peripherals and material supply system. Manufacturer: KraussMaffei Machine type: KM 300-1400 C2 Designation on control panel: KM 300-1400 C2P International size designation: KM 1400 C2/300 Machine type: Injection molding machine Year of manufacture: 2003 Machine no.: 61004124 Machine weight: 14,370 kg Operating hours according to display: 66,598:20 h Control system: KraussMaffei Material supply / dosing: Colortronic UB95 Nlodpe Afaqbofx Ai Ajh Temperature control / cooling unit: Frigel Microgel RCM80/6HP Year of manufacture Frigel: 2013 Voltage Frigel: 400 V Auxiliary voltage Frigel: 110 V Frequency Frigel: 50 Hz Maximum current Frigel: 17 A Refrigerant: R407C Refrigerant filling quantity: 2.4 kg Temperature range Frigel: -5 to +90 °C Weight Frigel: 200 kg Additional peripherals: Second Frigel Microgel unit, material conveying system, discharge conveyor belt and rotary table available Available from APRIL 2027

Condition: used, total height: 2,400 mm, total length: 5,300 mm, total width: 2,350 mm, Year of manufacture: 2022 Colour: Grey Empty weight: 4.000 kg What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2022 - Documentation available: Yes - CE marking present: Yes - Serial number: 30B.11.040.22 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: WoodFlash - Safety feature: Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 Nodpfx Aiszwul Hj Aolh - └ Brand: Becker - └ Type: PICCHIO 2200 - └ Year of manufacture: 2022 - Tools included: Yes - CNC options: Manual control - CNC documentation available: User keys/licenses, USB stick - Table length [mm]: 3300 - Table width [mm]: 1280 - Working range X [mm]: 3300 - Working range Y [mm]: 1280 - Z-axis working range [mm]: 250 - X-axis maximum stroke [mm]: 4000 - Y-axis maximum stroke [mm]: 1670 - Z-axis maximum stroke [mm]: 500 - Voltage [V]: 400 - Current consumption [A]: 40 - Power [kW]: 18.0 - Installed length [mm]: 6250 - Installed width [mm]: 3494 - Installed height [mm]: 2300 - Transport dimensions: 5300mm x 2350mm x 2400mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Hundegger K1A Used machine, available from a Swiss liquidation, in good condition. Includes infeed and outfeed systems. Mechanized. Nlodpfxs Afhm Rs Ai Aeh

Condition: used, Year of construction: 1994, Deckel FP4 MA Universal Milling Machine Universal Milling Machine – Deckel Type/Model: FP4 MA Condition: Used Nodpoz Ar Tfjfx Ai Ajlh Year of Manufacture: 1994 Technical Data Travel distances X / Y / Z axis: 485 x 385 x 380 mm Quill travel: approx. 80 mm Vertical milling head, manually adjustable on spindle head: 50 mm Table clamping surface: 460 x 800 mm Table permissible load: approx. 600 kg Spindle speed (18): 63 to 3,150 rpm Tool holder: SK 40 Operating voltage: 380 V 50/60 Hz Total connected load: 12.5 kVA Feed rate: 2 to 2,000 mm/min Infinitely variable Rapid traverse: 2 m/min Machine dimensions (L x W x H): approx. 200 x 2500 x 2050 mm Machine weight: approx. 2,000 kg Feature: - Deckel Dialog / Contour control Inquiry item: Transport costs in individual offer.

Year of construction: 2023, condition: used, Measuring Machine Manufacturer: PROZAP Type: EK0 EOL station Year of manufacture: 2023 Control system: Siemens Technical data: - Voltage: 400 V, 50 Hz - Current: 40 A - Operating pressure: 4.5 bar - Total power: 15 kW - Weight: 1,500 kg In our assessment, the machine is in mint condition. Nsdpfxozbvivj Ai Aslh Technical features: - Dimensional inspection of the cooling plate using measuring heads - Automatic label application Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Year of construction: 2013, condition: used, Cracking Machine Nlsdpfoy Ihbljx Ai Aoh Manufacturer: MAUSER + KRAUSECO Type: PS Cracker Year of manufacture: 2013 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: not inspected (used), Stud welding machine Manufacturer: NELSON Type: FSE 100 / FSE 500 Includes welding head, hoses, and control cabinet 15 x Nelson FSE 100 + N4 Inverter 5 x Nelson FSE 500 + N4 Converter Price per unit. Condition: used, untested In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale. Nlsdey Ihbxspfx Ai Aeh

Condition: used, Year of construction: 2008, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table width: 550 mm, table length: 700 mm, spindle speed (max.): 42,000 rpm, spindle nose: HSK 40, number of slots in tool magazine: 20, Vertical Machining Center Manufacturer: RÖDERS Model: RFM 600 DS Year of manufacture: 2008 Control system: Röders RFM 600 DS Technical data: - X-travel: 600 mm - Y-travel: 450 mm - Z-travel: 300 mm - Spindle speed: 42,000 rpm - Table size: 700 x 550 mm - Tool holder: HSK 40 - Number of tool positions: 20 Equipment: - Extraction system (Keller) - Pallet system (Röders RC 2) Nlsdpfxjx Iwg Do Ai Aoh Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: defective spare-parts repository (used), Universal Machining Center - Parts Donor Manufacturer: MIKRON Model: HSM 400 U The machine is defective and is being sold as a source of spare parts. Njdpsyzt A Usfx Ai Ajlh Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2015, operating hours: 56,000 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 840 mm, travel distance Z-axis: 550 mm, torque: 140 Nm, controller manufacturer: Siemens, controller model: 840D, overall weight: 9,700 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 17,500 h, spindle motor power: 22,500 W, spindle nose: HSK 63, number of slots in tool magazine: 24, tool length: 320 mm, Equipment: chip conveyor, Vertical Machining Center Manufacturer: CHIRON Model: MILL 1250 Year of manufacture: 2015 Control system: Siemens 840D Technical specifications: - X-axis: 1250 mm - Y-axis: 840 mm - Z-axis: 550 mm - Speed range - main spindle: 12,000 rpm - Drive power - main spindle: 22.5 kW - Max. torque: 140 Nm - Number of tools: 24 - Max. tool length: 320 mm - Spindle taper: HSK 63 - Operating hours: 56,000 h - Spindle hours: 17,500 h - Machine weight (approx.): 9.7 t Equipment & Accessories: - Internal Coolant Supply (ICS) Nedpfx Aioy Tbtlo Aelh - Chip conveyor - Glass scales on all axes - Automatic door - Swivel axis with counter-bearing (Fibro) 4 identical machines are available. The machines were used for light countersinking and drilling operations. In our assessment, the machine is in very good used condition and can be inspected under power by appointment. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2014, workpiece weight (max.): 3,000 kg, travel distance X-axis: 1,200 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,000 mm, Coordinate Measuring Machine Manufacturer: MITUTOYO Type: Crysta-Apex S123010 Year of manufacture: 2014 Technical data: Nljdjzbc Hhopfx Ai Aeh - X-axis: 1,200 mm - Y-axis: 3,000 mm - Z-axis: 1,000 mm - Resolution: 0.0001 mm - Max. workpiece height: 1,200 mm - Max. workpiece weight: 3,000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, CNC waterjet cutting machines PB-C 4020 COMBI Nlodpfo Afm Hijx Ai Ash X working area max.: 4000 mm Y working area max.: 2000 mm Control system: TCI CNC 4.0 Operating hours: 13,859 hours Laser beam on: 2938 hours Sheet metal thickness max.: 60 mm Workpiece weight max.: 3000 kg The waterjet cutting machines from TCI Cutting combine state-of-the-art European technology with individual further developments, based on many years of experience in the industry, both nationally and internationally. The PB-C COMBI combines the advantages of waterjet cutting technology with those of HD plasma cutting in a single machine. This offers our customers cutting precision, versatility, and speed, as well as the quality typical of HD plasma. In short: a complete solution that guarantees the highest surface quality for cuts of varying complexity, material thickness, and material type. The machine enables the cutting of workpieces with pure water or with water and abrasive, even with very hard and thick materials. As a result, it covers a broad spectrum of cutting processes, which can be adapted to the needs of the customer and the respective industry. In waterjet cutting, the workpieces are cut cold, which avoids changes in the chemical composition and deformations – especially in metals. - Plasma source Hypertherm XPR300 - Various nozzles for the cutting head - High-pressure pump KMT SLVI 50 STD Maximum pressure: 3800 bar Power: 37.5 kW - Water treatment system - Silo and dosing system for abrasive sand - Slurry flushing and filter system

Condition: new, Year of construction: 2026, laser power: 6,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New fiber lasers from the HLB series - optimized equipment with an eye on the essentials - low acquisition costs Max Photonics resonator, Raytools auto focus cutting head guarantee high-quality, competitive laser cutting with minimal maintenance costs FURNISHING: Nljdpszyaf Rjfx Ai Aeh Cutting head: Raytools - Auto Focus Resonator 6KW Automatic changing table including light barriers Suction: Welldone CE certified Cypcut control with touchscreen including online programming directly on the control Sheet format 4,000mm x 2000mm Connection value max. 30kW Installation area approx. 11,000mm x 3,500mm x 2,200mm The machine is included 12 month guarantee Installation Delivery within Germany and Software/operator training offered Optional: Offline programming CAD CAM software Libellula [CUT] Connect gases, electricity, done. In our exhibition we have various laser machines from our manufacturers under power and various materials for testing. We would be happy to invite you to come and cut your drawings or material. We, the company H+S, have been an exclusive trading company and service provider for YAWEI machines for 20 years, of which we have been selling their fiber lasers for around 15 years. We have already installed more than 300 fiber lasers from YAWEI. Come and see for yourself in your area. Call us and visit us!

Condition: used, Universal external and internal cylindrical grinding machine ERWIN JUNKER, Type BUAJ 29 NC External cylindrical grinding machine, internal cylindrical grinding machine Manufacturer's No. 3126, Year of manufacture 2001 Center distance max. 800 mm Workpiece grinding length max. 800 mm Center height 150 mm Swivel diameter max. 295 mm Workpiece weight max. 120 kg Workpiece spindle speed 20 - 750 rpm Spindle stock, internal taper MK 5 Spindle stock, short taper flange DIN 55027, Size 5, Ø 82 mm Spindle stock, spindle bore 36 mm Spindle stock adjustment 355 mm Tailstock, internal taper MK 4 Grinding wheel diameter max. 400 mm Grinding wheel width max. 63 mm Grinding wheel bore Ø 127 mm Grinding wheel peripheral speed 45 m/sec Automatic spindle stock feed 0.001 Manual feed 0.001 mm Hydraulic table movement 0-7.5 m/min Motor power, grinding spindle 7.5 kW Motor power, workpiece spindle stock 1.1 kW Motor power, internal grinding unit 1.75 kW Mains connection 400 Volt, 50 Hz - FANUC control, Type Power Mate-Model D - Grinding spindle stock swivels from +45° to -15° - Workpiece spindle stock swivels 90° - Table can be tilted for taper grinding up to 8°30" - Support/pinole for the workpiece spindle stock with internal taper MK 4 - Internal grinding unit for swiveling in - Internal grinding spindle with collet chuck, Ø 6 mm - Coolant system located beside the machine - Machine equipped with one grinding wheel, Ø 400 x 50 mm - 1 three-jaw chuck TOS, Ø 160 mm - 1 mechanical round magnetic chuck, Ø 200 mm - Collet chuck system with various collets - Various attachments for the internal grinding unit - 1 diamond grinding wheel dresser - Other accessories as shown in the pictures - Operating manual, hydraulic diagram, electrical diagram Space requirement for cylindrical grinding machine with band filter L x W x H 3200 x 2500 x 1900 mm Weight 5000 kg Nlsdpfx Aio Aard No Aoh In very good condition

Condition: used, Technical details: Nodpfx Aewix E Rji Aolh x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, accessories for both machines: 18 pallets, approx. 300pcs. toolholders, miscellaneous devices for workpiece-clamping... *

Condition: used, Year of construction: 2008, - R530 round stack feeder Nlsdpfo Afumqex Ai Ajh - Navigator control system - VARIO-Control - 6 parallel folding stations with automatic folding pocket adjustment - OCV LAN Smart Camera for text/barcode recognition - Folding rollers made of soft PU

Condition: used, - R800 round stack feeder - Navigator control system - 6 parallel folding pockets Nljdpfx Aie Afum Dj Aoh - 2 folding knives in the cross folding station - 1 additional folding pocket after the 1st transverse fold - Folding rollers made of soft PU

Condition: excellent (used), Catalog number 7248 Njdezh H A Ejpfx Ai Aslh TECHNICAL DATA - max. workpiece height 160mm - spindle working length 250mm - spindle diameter 40mm - max. tool diameter 220mm - worktable dimensions (length/width) 420x1010mm - motor 11kW - 2 pneumatic workpiece clamps - dust extraction port diameter 180mm - dimensions (length/width/height) 1500x1010x1560mm - weight 689kg ADVANTAGES – Made in Germany – Used milling machine, very good condition Net price: 31900 PLN Net price: 7419 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to currency fluctuations)

Condition: used, Year of construction: 2017, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm control Celos 840 D SL Operate Siemens turning speed range - main spindle 20 - 20.000 min/-1 power capacity - main spindel 35 / 25 kW Torque 130 / 86 Nm tool taper HSK-A63 b - axis +-100 ° table surface area 2.900 x 700 mm max. table load 2.150 kg number of toolpositions 120 pos. tool taper HSK-A63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 40 m/min feed speeds max. 40.000 mm/min feed power max. 8 kN total power requirement 67 kVA weight of the machine ca. 16,24 t dimensions of the machine ca. 8,0 x 5,6 x 2,9 m CNC - Travel Column Milling Machine DMG MORI - DMF 260 - 7 - NC tilting milling head (B-axis ±100°) - Balluff BIS C tool identification system -> One read/write head each at the tool loading/unloading station -> Evaluation unit -> CNC software -> Balluff chips NOT included! - incl. workspace partition - MPC (Machine Protection Control) - ATC (Application Tuning Cycle) - Dual changeover filter (25 µm) Nodpfxo Afpzio Ai Ajlh - Bed flushing / door flushing system (includes additional pump) - 2D surface feature (as an add-on to ATC) - EES (Extended Editing System) option - Provision for refilling the internal coolant supply (ICS) system - Provision for vacuum clamping - Clamping devices and machine vises NOT included!

Condition: good (used), Year of construction: 1986, functionality: fully functional, Machine Name - Benelli 1000 Tonne press Machine Model - Automatic transfer press PMT/3d/1000/5/1000P Nsdpfx Aijz Nhx Ao Ajlh Y.O.M 1986 (Retro-fitted 2015 by Helm) Description - 1000 ton SPM up to 26 Number of operational positions: 5 Press bed 5000mm x 2000mm Main carriage 5100mm x 1400mm second carriage Lateral opening between columns: 2500 mm Voltage power supply: 415V; 50 Hz Shut height range 730mm- 1070 Light guards Schlechier decolier : Coils up to 10ton and 1.2m wide, ID 500mm OD 1500mm Can be seen underpower from site.