Used Wire Stitcher for sale (3,101)

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: D12L/8327, Offer Number: D12L/8327 Machinetype: wire nail press Make: WAFIOS Type: N51 Constr. year: 1988 diameter range: 2,2-4,2 mm nail length: 13-105 mm output - pieces/min: 430 Location: In our warehouse Dsdozd U Nrspfx Acpecn

Condition: reconditioned (used), Year of construction: 2010, operating hours: 27,000 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 200 mm, total length: 205 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, empty load weight: 2,450 kg, Machine fully cleaned, inspected, and tested. Djdpfx Aozf Akyocpscn Available for viewing at our premises in Semsales (Switzerland). Wire guides, 0.25 mm. Large bobbin kit.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 0044, workpiece height (max.): 250 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, feed length X-axis: 350 mm, feed length Y-axis: 250 mm, feed length Z-axis: 256 mm, The machine was manufactured in 2011, but it was not put into operation and modernized until 2016. As part of this process, an electrical update for the WorkPartner automation system was carried out! TECHNICAL DETAILS Workpiece weight max.: 200 kg Travel range X-axis: 1,800 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 1,100 mm Workpiece height max.: 250 mm Workpiece width max.: 750 mm Workpiece length max.: 550 mm Feed length X-axis: 350 mm Feed length Y-axis: 250 mm Feed length Z-axis: 256 mm MACHINE DETAILS Type of input current: Three-phase Dedpfx Aszf E Nxocpscn Dimensions & Weight Dimensions (L x W x H): 3,000 x 3,760 x 2,455 mm Total weight: 3,700 kg EQUIPMENT Documentation/Manual Cooling unit Note: The operating hours of the machine can be found in the last image.

Condition: used, Year of construction: 1983, functionality: fully functional, Equipped with : Wire Straightener , Bushing Cutoff, PKO 1-3, IFO Transfer, Variable Speed and Separate Tool Lube Dsdpjzt S Tgjfx Acpocn

Condition: new, Year of construction: 2026, The dual wire feeder has been designed to increase the efficiency and quality of welding processes in the most demanding industrial environments. Thanks to its innovative design that allows the use of two different types of welding wires, this feeder is the ideal solution for CORMAK laser welding machines, offering users a number of benefits. Dual wire feeder for CORMAK laser welding machines The dual wire feeder is the choice that allows for significant improvement in work standards, while offering the flexibility, efficiency and reliability necessary in modern production processes. This solution meets the expectations of even the most demanding users looking for ways to optimize their IMPROVED PRODUCTIVITY - The dual wire feeder reduces machine downtime associated with spool changes, contributing to faster and more efficient production cycles. VERSATILITY - The dual wire feeder allows for quick adaptation to changing project requirements. PROCESS OPTIMIZATION - Users can easily switch between wires with different diameters or properties to tailor the welding process to specific tasks, ensuring high weld quality and work efficiency. IMPROVED WELD QUALITY - By allowing for dual wire to weld material, the feeder provides better alignment at larger gaps, resulting in longer lasting and cleaner welds. REDUCE OPERATING COSTS - Long-term benefits such as reduced downtime and improved work efficiency allow for significant savings. Dsdowl Ewxopfx Acpecn

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, working width: 1,650 mm, wire diameter (max.): 7 mm, Schlatter MG930, quick change, DC welding machine with 5 DC transformer, 1092 kVA. Schlatter control from 2007 with S7-300 PLC. Automatic line wire loader up to 3m, automatic line wire channel positioning, open portal DC welding machine, quick change cross wire hopper, MLV1 pullout and stacker. Dcodpfx Aezd Sulecpsn

Condition: new, Year of construction: 2024, operating hours: 10 h, functionality: fully functional, For sale: EWM Tetrix XQ 400 Puls AC/DC W Expert welding machine including accessories (TIG Speed continuous drive 45 coldwire wire feeder/ABITIG 500W MT 4m torch/others). The system was purchased as an add-on for a BOKI linear welding automaton, intended for longitudinal welding of aluminium tubes/sheets. Welding was successful; however, the project was ultimately not realized. The equipment has run for approx. 20 hours = like new condition. Original price: CZK 354,800. Dsdjy Hpamepfx Acpscn

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 591.063.060.0016, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,800 kg, table length: 900 mm, Equipment: documentation/manual, The CUT P 550 model from 2017 is an advanced five-axis wire EDM machine, ideal for precise industrial applications: * wide angular range capabilities (up to 30–45°), * efficient and intelligent IPG generator, Dcjdowwrtwjpfx Acpon * accuracy within a few µm, * advanced automation systems and anti-collision protection, * stable, durable design enabling fully automatic operation.

Condition: used, all stainless steel electrically heated heating separately adjustable in two areas adjustable speed belt width ± 1.000 mm 270 kW, 411 amp canopy with electric hoists with a fine-mesh band Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 9.000 x 2.600 x 3.700 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Dcsdpfx Aez Ep A Hjcpsn Coding/labeling of components and cables New electrical heating elements: New folded heating resistances Completely new wiring Electrically tested, heated through, and measured

Condition: used, Year of construction: 2013, Technical details: weight of the machine approx.: 300 kg electrics - voltage/frequency: 400 / 50 bei 3~ V/Hz power consumption: 750 Watt dimensions L x W x H: 1,5 x 0,8 x 2,6 m Mobile compact filter unit with extraction arm. (Welding fume extraction and fume filtration). Range of application: MIG/MAG solid wire; various fume and dust applications. incl. extraction nozzle manufacturer Lincoln, type LFA 4.1 CPL BJ 2013; tube Ø 200mm; suction Ø 280mm; total length=3900mm; the head is equipped with illumination via light switch, manual rotary head for locking flap, on/off switch gas temperature 40°C / 100°F Suction capacity approx. 2000m³ mobile over 4 wheels, front braked Dedpfeu Nv Afjx Acpecn *

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25667, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Dodpfx Asy Tybnjcpecn Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 400 mm, wire diameter (max.): 0.3 mm, overall weight: 2,700 kg, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis Mitsubishi MP1200 wire EDM machine was manufactured in 2021. It features a robust design with a machine weight of 2700 kg and is equipped with the advanced D-CUBES controller. If you are looking to get high-quality wire electrical discharge machining capabilities, consider the Mitsubishi MP1200 machine we have for sale. Contact us for further details. Dedpfxez E Su Ej Acpocn - Machine Type: Wire Electrical Discharge Machine- Series: MP Series (Water Technology)- Type: TYPE II- Controller: D-CUBES- Power Supply: 3PE 50Hz AC200V, 35A, SCCR 2.5kA- Air Source: 0.5 MPa, 75 L/min- Operating Hours:- Machining Time: 3711- Start Time 1: 26- Start Time 2: 4137- Off Time: 426

Condition: used, Year of construction: 2002, Voltage: 400V / 50/60Hz / 3 phases Machining method: Immersion Maximum workpiece size: 1200x700x400 mm Maximum workpiece weight: 1500 kg Table dimensions: 900x600 mm Distance from floor to table: 900 mm Total dielectric fluid volume: 1200 L Axes X, Y, Z, U and V Travel ranges X, Y, Z: 550 x 350 x 400 mm Travel ranges U, V: 550 x 350 mm Collision protection: Axes X, Y, U, V, Z Tapered cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (Option 0.1/0.2/0.3 mm) Wire guide type: Closed diamond guide, gap-free Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 kg (P5) Dielectric fluid Paper filter: 2 cartridges Dielectric fluid temperature: +/- 1°C Total volume of ion exchange resin: 20 L Maximum injection pressure: 20 bar Generator: Dual source Isopulse Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 microns Ra Measuring system: Glass scales Measuring resolution: 0.5 microns Servo motors: AC type All technical specifications are subject to change without notice; errors and omissions excepted. Dcjdjza U Nlopfx Acpon The machine was fully functional until it was dismantled. Warranty is excluded.

Condition: used, Technical details: welding current: 440 V weight of the machine approx.: 242 kg dimensions L x W x H: 1,5 x 0,8 x 1,3 m MIG/MAG control unit: with 2/4-cycle switchover with 3x12 welding stages Dodpfx Acovz Advspjcn Cooling system: water-cooled with frost protection Shielding gas with solenoid valve and pressure reducer Hose package 3.6 m long Torch head Ground clamp with ground cable 4.8 m long Wire feed with 4 roller drive for wire diameter: Ø 1.0 mm/Ø 1.2 mm *

Condition: used, Technical details: wire diameter - max.: 9,0 mm wire diameter - min.: 2,0 mm voltage: 380 V / 50 Hz V control voltage: 220 V Total power requirement: 18 kW Weight approx.: 5,0 t dimensions: Schmiermittelanlage: 830 x 650 x 1000 mm dimension machine approx.LxWxH: 3,3 x 1,5 x 1,45 m dimensions electric cabinet LxWxH: 0,7 x 1,5 x 1,75 m WIRING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right and left-hand tension and compression springs as well as torsion springs. The springs can be produced with any pitch and shape of spring body. Output max. 90 pieces/min. Outer spring Ø 10 - 120 mm Unlimited wire feed length, speed = 27 - 80 m/min. Coiling device: two-finger system wire thickness Ø 2.0 - 9.0 mm; spring outer Ø Ø 10 - 120 mm Single-finger system: wire thickness Ø 3.0 - 7.0 mm; spring outer Ø max. Ø 60 mm Equipment: 5x feed rollers, wire holder 3 mm two-finger Dcsdpfovc Aklox Acpon Spring length measuring device LION PRECISION-PANTHER Wire roller holder POST, motor-driven, mandrel holder Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit Optional many accessories and/or spare parts! i.D. *

Condition: used, Year of construction: 2015, Overview Traditional-method finishing line for cava, champagne and other sparkling wines, from riddling and neck freezing through disgorging, dosing, corking and wire hooding to capsuling, labelling and case sealing. The machines are rated between 1,800 and 2,500 bottles/h. Two stainless steel tanks complete the offer. The line is sold as a whole; the gyropalettes and the two tanks are also available separately. Technical data Djdpsz E U D Njfx Acpecn - Product: sparkling wine, traditional method (cava, champagne) - Capacity: 1,800 to 2,500 bottles/h depending on the machine - Bottle formats: Bordeaux and Burgundy/cava - Years of manufacture: 1987 to 2018 - Electrical supply: 380-400 V, 50 Hz Scope of Delivery - Gyropalettes | ADRESSES INDUSTRIE | 504 S | for 504-bottle metal cages or 500-bottle packs, approx. 6,000 bottles per batch, control cabinet | 1998 - Balancer manipulator | DALMEC | PARTNER PMC | pneumatic, max. load 80 kg, bottle gripper head, unloads the cages into the neck freezer | 2005 - Neck freezer | TALLERES URPINAS | G+20 B | glycol/brine bath at -25 °C, touch panel, 2.28 kW, 380 V, 2,000 bottles/h | 2005 - Disgorging and dosing monobloc | PERRIER | crown cap removal, ice plug ejection, expedition liqueur dosing and levelling, approx. 50,000 bottles since the last general overhaul, original manual, 2,500 bottles/h | 1987 - Corker | AROL | GEMINI F | natural cork (mushroom) corking, single head | 2015 - Wire hooder | Robino & Galandrino | VITTORIA T 1/1 JUNIOR | monobloc with the corker, wire hood plaque feeder, inclined long-duration wire hood magazine, touch panel, 400 V, 50 Hz, original manual, 2,000 bottles/h; cork feeding and sorting hopper available as an option | 2015 - Bottle turner / homogeniser | FORNS | continuous, mixes the expedition liqueur into the wine, 2,500 bottles/h | 1987 - Washing, drying and blowing tunnel | CAMES | WDT-1 | exterior washing, high-speed Sonic air knives, 400 V, 50 Hz, 700 kg | 2018 - Capsule applicator | C.M.A.R. | capsule distributor with pleating and smoothing heads | 2001 - Labelling machine | PRIMA INDUSTRIES | PLM 1500 | self-adhesive, 3 label stations plus neck collar, capsule orientation with spot and UV sensors, SICK photocells, star wheels for 75 mm (Bordeaux) and 89 mm (Burgundy/cava) bottles, 3 kW, 400 V, 1,800 bottles/h | 2018 - Case sealer | SIAT | SK2-S | top and bottom adhesive tape sealing, 380 V, 3-phase | 2015 - Tank with agitator | DECALSA INDUSTRIAL | 12,200 L, agitator, heating and cooling coils, control box | 1988 - Tank | MAGUSA | DPG | 10,000 L, AISI 304 | 2000 Condition Used, still installed and in production. Regularly maintained; most machines have had one owner since new. Availability Available now. Inspection possible. Location: Spain.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, General overhauled OPS Ingersoll Gantry 500 Wire EDM machine – in top technical and optical condition. The machine has been comprehensively and professionally overhauled in our workshop and is in very good condition both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric measurement, alignment, and additional check using a laser measuring system were performed. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine was completely repainted and is now in very good cosmetic condition. The generator and control unit were cleaned and technically inspected. The air conditioning unit of the generator was also cleaned to ensure reliable cooling and stable operation. Finally, the machine was subjected to an extensive erosion test according to the quality and testing specifications of OPS Ingersoll. The machine is immediately ready for operation and is ideal for reliable production. Dcedpfxsyrqpfo Acpen Technical data: Ingersoll (OPS Ingersoll) Wire EDM machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture 2009 Control system EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld device Manual erosion with Powertec Handheld High-speed jump max. 18 m/min Generator output 60 amps, EAGLE Powertec Travel ranges (X, Y, Z) 525 x 400 x 450 mm Electrode changer 20-position pick-up disc changer Work tank (W x D x H) 770 x 670 x 440 mm Work table (W x D) 750 x 650 mm Load capacity 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) 30.09

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning diameter: 1,270 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 5 rpm, spindle motor power: 30,000 W, rotational speed (min.): 5 rpm, rotational speed (max.): 6,000 rpm, total height: 5,000 mm, total length: 8,000 mm, workpiece weight (max.): 6,000 kg, torque: 190 Nm, overall weight: 22,000 kg, spindle nose: HSK100, Equipment: documentation/manual, rotational speed infinitely variable, The spindle was completely overhauled in 2025! The invoice for the spindle overhaul is attached. TECHNICAL DETAILS General Information Manufacturer: Konrad Seidler Model: MINIMAX 1800 Year of Manufacture: 2013 Machine Type: CNC rotary table turning, boring, and milling center Operating Mode: Single-shift operation Machine Weight: approx. 22,000 kg Control and Drive Control System: Siemens 840D SL Drives: SINAMICS 120 Turning Range and Rotary Table Turning Diameter: 500–1,270 mm Rotary Table Load Capacity: 6,000 kg Rotary Table Speed: 5–500 rpm Dedpfx Aez Hmhiscpecn Boring and Milling Spindle Boring/Milling Spindle Power: 30 kW Torque: 190 Nm Boring/Milling Spindle Speed: 2–2,500 rpm Boring/Milling Spindle Speed: max. 6,000 rpm Tool Holder: HSK100 Tool Changer Tool Changer: 16 tools Coolant System Coolant Pressure: 6 bar High-Pressure Coolant Pressure: 30 bar Chip Conveyor Chip Conveyor: Cross conveyor, discharging to the left Discharge Height: 1,200 mm Machine Enclosure Enclosure: Double sliding door Work Area: Walk-in Spindle Overhaul Year of Spindle General Overhaul: 2025 Investment Costs: 36.5 thousand EUR EQUIPMENT Chip Conveyor Walk-in Work Area High-Pressure Coolant System Tool Changer with 16 Positions HSK100 Tool Holder Double Sliding Door Operating Manuals Installation Documents Wiring Diagrams, partially available Documentation of Machine Components Documents for the Control System Documents for the Chip Conveyor Other Original Documents from Commissioning Documents for the Spindle Overhaul Test Report of the Spindle Overhaul Extensively Overhauled Capellini High-Performance Spindle Renewed Precision Bearings Renewed HSK100 Clamping System Renewed Balluff Sensors Refurbished Spindle Shaft Renewed Wear Parts Finely Balanced Spindle according to ISO 1940 System-Balanced Spindle Assembly Chuck and Jaws

Condition: excellent (used), Mesh Gratings / Shelf Panels for Pallet Racks for 180, 270, and 360 cm Bay Widths Specifications: Dcodpfx Aep Duf Necpjn Material finish: hot-dip galvanized Overall width: approx. 1,340 mm (crossbar direction) Overall depth: approx. 1,080 mm (load bar direction) Suitable for frame depth: 1,100 mm Clear support span: approx. 990 mm Beam support: approx. 50 mm Mesh size: approx. 33 x 66 mm Load bar height: 30 mm or Material finish: hot-dip galvanized Overall width: approx. 1,330 mm (crossbar direction) Overall depth: approx. 1,040 mm (load bar direction) Suitable for frame depth: 1,050 mm Clear support span: approx. 940 mm Beam support: approx. 50 mm Mesh size: approx. 45 x 70 mm Load bar height: 30 mm We stock mesh gratings for the following rack depths: 1 m, 1.05 m, 1.1 m or 1.2 m This mesh grating is the perfect solution to optimize your racking and provides excellent support for your storage requirements. Price on request – Get professional advice! Looking for additional shelf panels or mesh gratings in other versions? No problem! Our team will be happy to help you design a customized racking solution tailored to your individual requirements. Do you have a rack you wish to sell? Simply send us photos and measurements, and we will provide you with a fair offer. Contact us: BLB GmbH – Contact person: Mr. Dominik Blum Tel. Take advantage of our delivery service directly to your site! If you have any questions, please do not hesitate to contact us – we look forward to your call or message!

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 29 h, roller diameter: 90 mm, sheet thickness steel (max.): 2 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), working length: 1,270 mm, For sale is a like-new round bending machine with only 26 operating hours! TECHNICAL DETAILS Work area Working length: 1,270 mm Sheet thickness at 450 N/mm²: max. 2.5 mm Sheet thickness at 700 N/mm²: max. 1.5 mm Sheet thickness for conical bending of steel sheet: 2 mm Roller diameter: 90 mm Roller speed: 6 m/min Diameter of feed grooves: 4 / 6 / 9 mm MACHINE DETAILS Motor power, main drive: 1.1 kW Dimensions & Weight Dimensions (L x W x H): 1,850 x 700 x 1,200 mm Weight: 520 kg Dcjdpfxez Dw Eme Acpjn EQUIPMENT 3-roller round bending machine with asymmetrical roller arrangement Robust machine frame made of spheroidal graphite cast iron Induction-hardened rollers, also suitable for processing stainless steel Main motor with braking system for precise bending Swiveling top roller with eccentric locking for easy workpiece removal Wire feed grooves on the lower and rear rollers Conical bending device Manual adjustment of the rear roller Separate mobile control console with foot switch for left/right operation Emergency stop safety cable Side cover Operating manual

Condition: ready for operation (used), Year of construction: 2023, operating hours: 6 h, travel distance X-axis: 2,465 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 378 mm, number of axes: 5, This 5-axis BIESSE ROVER PLAST A FT 1224 was manufactured in 2023. It features a working area of 2465 mm x 1260 mm and a Z-axis stroke of 378 mm. The machine is equipped with a powerful 13 kW machining unit capable of up to 20,000 RPM. If you are looking to get high-quality CNC wood machining capabilities, consider the BIESSE ROVER PLAST A FT 1224 machine we have for sale. Contact us for further details. Dcedpfsz H Rk Ujx Acpon • Working Area / Table Dimensions: X = 2465 mm, Y = 1260 mm• Z-Axis Stroke: 378 mm• Maximum Axis Speed: X = 85 m/min, Y = 60 m/min, Z = 20 m/min• Maximum Piece Passage in Z: 200 mm (170 mm with Sweeper Arm)• Worktable Type: FT PLUS phenolic layer table with 30 mm grid layout, 12 mm MDF matrix plate• Vacuum System: Multi-zone vacuum system (4 independent zones)• Vacuum Pump: 1x 250 m³/h cam vacuum pump (dry running, maintenance free)• Machining Unit: 5-interpolating axes machining unit, 13 kW (17.4 HP) S6 / 11 kW S1, HSK F63 adapter, liquid-cooled, up to 20,000 RPM• Axis Angles: C-axis 360° continuous rotation, B-axis +/- 150°• Coolant Unit: Liquid cooling system (absorbs 1600 W) for electrospindle• Tool Tool Changer / Magazines:• 13/16-position linear side tool changer mounted on machine bed• 8-position revolving tool changer mounted on X-carriage• Measuring Systems: Digital tool length presetter (for diameters up to 130 mm)• Software: BH660 PC-based control with WRT (Windows Real Time), bSolid (3D CAD/CAM), bSolid 3-Axis & 5-Axis machining modules, bNest (Nesting module), bSolid File Import Module• Additional Features:• LED light strip for work area illumination & L-shaped LED projector for vacuum pod positioning• Ionizer for static charge reduction on plastics• Tool lubrication system (air-oil mist) for non-ferrous material processing• Wired remote control pad• Uniclamp adapters (4x) and Uniclamp clamping devices (4x, H=74mm)• Vacuum modules: 6x (132x146 H74mm), 4x (132x75 H74mm), 4x (132x54 H74mm)• Air cushion blower for easy loading/unloading• Barcode scanner (1D wireless)• UPS backup for machine PC (7-10 min power backup)• Power Supply: 400 V / 50 Hz, 3-phase (without neutral conductor), voltage tolerance +/-10%Safety Standard: CE / UKCA with Full Bumper safety system and protective enclosure

Condition: used, Year of construction: 2007, Booklet Production HORIZON SPF-200A FC-200A VAC-100a VAC-100m This used Horizon booklet system is a powerful machine for professional production of saddle-stitched booklets. It consists of these main parts: - SPF-200A stitching unit - FC-200A front trimmer - 2 VAC-100a and VAC-100m collating towers with 20 feeding stations total Key features: - Fully automatic: Efficient and automated booklet production - Modular: Can add more collating towers to increase capacity - Flexible: Handles offset and digital prints, good for small to medium runs - Automatic format setting: Quick setup for different sizes - High speed: Up to 9,500 sets per hour - Error prevention: Checks for missing/double sheets and jams - Expandable stitching: Can upgrade to 4 stitching heads and loop stitching Technical specs: - Input size: max 508 x 356 mm, min 180 x 105 mm - Final booklet size: max 250 x 356 mm, min 85 x 105 mm - Paper weight: 64 to 300 gsm - Booklet thickness: max 25 sheets / 100 pages (80 gsm) - Speed: Up to 4,500 A5 or 4,000 A4 booklets per hour - Stitching: Standard 0.4-0.5 mm wire, optional 0.6 mm - Collating towers (each): - 10 stations - Size: max 500 x 350 mm, min 148 x 120 mm - Paper: 40-250 gsm - Capacity: 55 mm per station Dcjdpfx Acsz H Skpepjn - Speed: Up to 9,500 sets/hour - Power: 230V/50Hz - Weight: About 1,365 kg - Size: About 3,450 x 810 x 1,250 mm (L x W x H) All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: reconditioned (used), Awl grinding machine Manufacturer: harich (Deckel) Model: SSMplus (S0E) Refurbished, with CE marking Includes warranty Equipment: - Machine stand - Integrated dust extraction - Grinding wheel with flange - Dressing tool - New machine electrical system in accordance with current safety regulations - Documentation for the machine and control cabinet in printed form, consisting of: - Operating manual - Wiring diagram - CE declaration of conformity Additionally equipped with safety measures in accordance with standard EN 60204-1, consisting of: - Control cabinet with main switch, power supply, contactors, motor protection, safety switching devices - Emergency stop mushroom button Dcedpfxsz Hy E Io Acpjn instead of the main switch on the machine - Green button for turning the machine on (illuminated) - Red button for turning the machine off - LED status indicator in the form of the harich logo: - Blue for machine on - Green for grinding spindle on

Condition: ready for operation (used), Year of construction: 2017, operating hours: 30,600 h, travel distance X-axis: 800 mm, wire diameter (max.): 0.33 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis +GF+ AGIECHARMILLES CUT 400 Sp was manufactured in 2017. It features a Wire Guide Set for Ø 0.250 mm and a Taper Tapering Kit for 45° taper cuts. If you are looking to get high-quality wire EDM capabilities, consider the +GF+ AGIECHARMILLES CUT 400 Sp machine we have for sale. Contact us for further details. Dedpfxjz Hwt Ae Acpecn - Overall Dimensions (L x W x H): 2670 x 2870 x 2645 mm- Total Weight without Dielectric: 6300 kg- Total Weight with Dielectric: 8040 kg- Max Noise Level: 76 dB- Sliding Door: Yes- Worktable Dimensions: 1240 x 800 mm- Max Workpiece Dimensions: 1450 x 900 x 510 mm- Max Workpiece Weight: 3000 kg- Max Dielectric Level: 520 mm- Axis Travel X, Y, Z: 800 x 550 x 510 mm- Axis Travel U, V: 800 x 550 mm- Taper Angle / Height: ±30°/510 mm (Option ±45°/510 mm)- Taper Tapering Kit: Kit for 45° taper cut (Kit für 45° Konikschnitt)- Measurement Resolution X, Y, U, V, Z: 0.05 µm- Axis Speed: 0...3000 mm/min- Dielectric Type: Deionized water- Dielectric Total Volume: 1700 L- Dielectric Temperature Control: Automatic setting ±1°C- Filter Cartridges: 4- Cooling System: Water / Water heat exchanger- Wire Diameter: Ø 0.2...0.33 mm- Standard Wire Guides: Closed guides Ø 0.25 mm- Wire Guide Set: Taper Expert Ø 0.250 mm (for CUT X00/FI X4)- Automatic Threading: Yes- Permissible Wire Spool Weights: 8-25 kg- Generator Type: CLEANCUT- Three-Phase Input Voltage: 380/400 V ±10%- Mains Frequency: 50 or 60 Hz- Max / Required Power: 12 kVA- Min Roughness: Ra 0.2 µm (carbide) / 0.28 µm (steel)- User Interface: AC CUT HMI- Operating System: Windows XP- Display: 15" LCD- Connectivity: E-Connectivity, Ethernet, USB- Operating Ambient Temperature: 15...30 °C (20 ± 1 °C for optimal precision)- Max Relative Humidity: 40...80%- Compressed Air: 6-7 bar

Condition: like new (used), Year of construction: 2003, Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 20000 x 2500 mmNumber of T slots: 10T slots dimensions: 22 mm Traverses of axis X axis traverse: 20000 mmY axis traverse: 3800 mmZ axis traverse: 1250 mmVertical capacity: 100 / 1350 mmDistance between columns: 3200 mm Milling head Head type: Auto-indexing BC universal UAD milling head (0,1º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872Speed range: 6000 rpmSpindle power: 27 kW Feedrates Rapid feedrates (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 15000 kgMachine weight approximate: 150000 kgMachine dimensions approximate: 30190 x 8865 x 6200 mm Accessories Guarding: Door with platform access and new perimetral wire-mesh fenceAutomatic tool changer:ATC-120Chip conveyor:2 longitudinal hinge typeControl panel: 2 switched panels on each side of the tableElectronic handwheel: HR-510Coolant: External and internal high pressure through spindle Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features Dedpfx Acjy Nfz Ejpjcn