Used Wmw Dlz 355 for sale (458)

Condition: used, Technical details: floor-plate length: 385 mm plate width: 205 mm Plate thickness: 65 mm very good steel plate for sale free, packed in oiled paper and foil Rodpfx Aju N D Hrolrou Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x swivel hoist ring) *

Condition: used, Technical details: floor-plate length: 255 mm Plate thickness: 65 mm very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x swivel hoist ring) Rodpfju N D Icox Alrou *

Condition: used, Technical details: width: 1270 mm Redpfx Alju N Ea Hjreu depth: 1000 mm height: 1600 mm 2 pieces clamping angle available ( Priece per piece) T-slot according to DIN 650 a=35mm; b=60mm; c=27mm; h=65mm *

Condition: used, Technical details: width: 200 mm Rjdpfx Alsu N Ec Usrju depth: 300 mm height: 500 mm weight of the machine ca.: 38 pro Winkel kg 2 pieces available ( price per piece) *

Condition: used, Technical details: table surface area: 330 x 310 geschlichtet mm weight of the machine ca.: 25 kg dimension L-W-H: 430 x 400 x 420 mm Application: Machine table adjustable clamping angle with 3 T-slots according to DIN 650: a=17; H027; b=32; c=14mm distance 100mm swivelling via tooth guide +90° rotatable 360° Base Ø 350mm with 2x clamping groove Ø 17 x 25mm Rjdpju N Einefx Alrou *

Condition: used, Technical details: Rodpfsvgbdxox Alrou bore capacity in steel (diameter): 13 mm throat: 160 mm bore stroke: 60 mm spindle taper MT: MK2 spindle speed:: 210 - 2580 / 16 step U/min feed: manual mm/U table clamping surface:: 200 x 185 (fest) mm Distance spindle/table max.: 620 mm table clamping surface:: 260 x 265 (verstellbar) Distance spindle/table max.: 160 - 460 mm table rotating: ja ° drill table adjustment: 300 (Handkurbel) mm column diameter: Ø ca. 70 mm total power requirement: 900 Watt weight of the machine ca.: 90 kg dimension machine xH: 0,6 x 0,31 x 1,7 m The machine is equipped with a RÖHM 1-13 drill chuck incl. drill chuck key. Spindle run right. Small vice included *

Condition: used, Technical details: bore capacity in steel (diameter): 22 mm throat: 205 mm bore stroke: 100 mm spindle taper MT: MK2 spindle speed:: 2 step U/min Rjdpfx Aljvxf Irjrju feed: manuell mm/U Distance spindle/table max.: 150 - 600 mm base plate surface area: 350 x 400 mm table clamping surface:: 360 x 280 mm table rotating: 360 ° drill table adjustment: 450 mit Kurbel mm column diameter: Ø 100 mm control voltage: 380 V total power requirement: 0,8 kW weight of the machine ca.: 270 kg dimension machine xH: 0,6 x 0,5 x 1,95 m column drill incl. machine + vice. *

Condition: used, Technical details: x-travel: 1000 mm y-travel: 350 mm z-travel: 400 mm distance between column - table edge: min.150 / max. 550 mm Rjdpfx Asv Sz Dielrou turning speed range: 28 - 1400 / 18 step U/min tool taper: SK40 spindle head swivable left - right: 90° und vor/zurück: 45° ° feed:: X/Y-Achse: 16 - 800 / 18 step mm/min Table dimensions: 1600 x 400 mm table surface area: 1400 x 330 mm total power requirement: 14,5 kW weight approx.: 4000 kg dimension machine xH: ca. 2,0 x 2,4 x 1,85 m

Condition: used, Year of construction: 2001, Technical details: pressure: 250 t Rjdpfxexna Uzj Alreu throat: 360 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. ram speed - forward: 450 mm/sec. hydraulic-pressure: 280 bar connected load: 43 kW work speed: 11....50 mm/s operating pressure: 20 MPa total power requirement: 20,5 kW weight of the machine ca.: 17 t dimension machine xH: 3,9 x 1,9 x 4,0 m

Condition: used, Year of construction: 1989, Technical details: plate width: 1600 mm plate thickness: 20 mm smallest sheet thickness: 6 mm Redpfx Aoyvfy Tolrsu Number of Straightening rolls: 11 straightening roll diameter: 180 mm straightening feed: 10 m/min connected load: 76 kW total power requirement: 75 kW weight of the machine ca.: 39,2 t

Condition: used, Year of construction: 1957, Technical details: Rsdpou Id D Ujfx Alrsu bore capacity in steel (diameter): 20 mm throat: 220 mm bore stroke: 85 mm Distance spindle/table max.: max. 260 mm range of revolution per miute: Keilriemen U/min spindle taper MT: 2 table surface area: 220 x 280 mm base plate surface area: 225 x 280 mm distance spindle center to floor plate:: max. 380 mm total power requirement: 0,33 kW machine weight ab.: 125 kg dimensions L x W x H: 0,8 x 0,4 x 0,8 m The machine is currently in the technical department. Table rotatable 380 V with connection cable 2500mm *

Condition: used, Year of construction: 1951, Technical details: turning diameter over bed: 400 mm turning diameter over support: 240 mm turning length: 1100 mm centre height: im Bett gemessen: 190 mm spindle passage: 40 mm range of revolution per miute: 37,5 - 950 U/min total power requirement: 3,5 kW tailstock quill taper MT: MK 4 tailstock quill: 180 mm weight of the machine ca.: 1,6 t dimension machine xH: 2,6 x 1,4 x 1,3 m Rodpfxou Ix Hdo Alrou The lathe is equipped with threading device. It is rewired and a new control cabinet is made. Emergency stop switch and chuck protection 3-jaw chuck Ø 250mm rotating tip Tool support quadruple steel holder tool support approx. 30° right/left swiveling 4 Stück Wechselräder Copying device (taper 15° right/left) *

Condition: used, Year of construction: 1986, Technical details: turning diameter over bed: 315 mm turning diameter over support: 200 mm turning length: 500 mm turning diameter over bed: 315 mm swing diameter over face slide: 200 mm center height measured in bed: 180 mm spindle passage: Ø 32 mm range of revolution per miute: 56...2.800 / nur only 6 step links-rechts U/min range of feed in x - axis: längs: 0,02..0,8 m/min range of feed in y - axis: plan: 0,01..0,4 m/min tailstock quill taper MT: MK 4 tailstock quill adjustment:: 140 mm total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,1x 1,1 x 1,4 m -Workpiece pick-up via collet chuck -travels longitudinal slide= 580mm and cross slide=170mm -incl. tooling device lathe support -incl. change gears Redpfx Aou Ix Hqjlrsu -steady rest Ø 100mm -fourfold tool holder The machines functionality is limited ! 6 speeds are currently selectable! (224/1800 ; 280/2240; 355/2800 rpm.) i.D. *

Condition: used, Year of construction: 1980, Technical details: pressure: 400 t stroke: 40 - 140 mm strokes / minute continous: 32 Rodpfx Alju N A Uujrou throat: 400 mm dayligth: min/max: 450/590 mm ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. *

Condition: used, Year of construction: 1980, Technical details: Pressure: 160 t stroke: 20-160 mm throat: 400 mm ram adjustment: 120 mm no. of strokes: 71 Hub/min daylight dimension : table/slide up: 720 (bei Hub 160mm) mm daylight dimension : table/slide low: 560 (bei Hub 160mm) mm ram surface area: 900 x 660 mm distance between columns: 500 x 450 mm table surface area: LxBxØ: 1200 x 750 x 100 mm total power requirement: ca. 23.0 kW weight of the machine ca.: ca. 15,0 t dimension machine xH: 2,7 x 1,5 x 3,45 m dimensions electric cabinet LxWxH: 2,0 x 0,65 x 2,15 m Operation via control panel/operator stand/foot control and hand-held control unit The press can be offered with two options. 1st option: Sold as is, not connected, not complete, not functional. 2nd option: The baler will be refurbished, all parts will be exchanged, replaced and puddled. The press will be set up again. For inquiries about this press, please select your offer option! in progress. Rodpfxeu N A U Is Alrou *

Condition: used, Technical details: floor-plate length: 800 mm plate width: 455 mm plate height: 75 mm weight of the machine ca.: 264 kg transport dimensions LxWxH: 800 x 455 x 250 mm Rsdpfju N Dhiox Alrsu ram plate of a PYE 160S press Use: e.g. for reducing the installation height of the press or shortening the working distance (forward run) - with centre bore Ø 40mm continuous - with 6x part circular drilling Ø 16mm, pitch circle Ø 160mm - clamping slot diagonal according to DIN 650 ( a=19mm; h= 25mm; b= 38mm; c= 16mm - below with support plate = distance approx. 410mm *

Condition: used, Technical details: travel -y axis: Schlitten auf Balken: 200 mm spindle taper ISO: SK 40 spindle head swivable left - right: je 90° ° quill stroke: 80 mm turning speed range: 90 - 900 / 5 step U/min distance table - lower edge spindle: min./max.: 50 / 400 mm table surface area: Anbaufläche:760 x 200 mm table surface area: Spannfläche: 630 x 200 mm max. table load: 100 kg x-travel: Tisch längs: 320 mm z-travel: Tisch vertical 350 mm table swivelabel +/-: re/li je 30° distance table - lower edge spindle: min./max.: 50 / 400 mm feed:: Tisch: stufenlos 14 - 71 mm/min total power requirement: 4,0 kW weight approx.: 1.200 kg dimension machine xH: 1,3 x 1,5 x 1,8 m Equipped with Heidenhain DRO for X and Y travel Rsdpsu Ndb Ajfx Alreu Swiveling work spindle The feed works via variator gear. The table is swivelable. Spindle speeds operate in 3 levels via gears and in 2 levels electrically. Cooling device diverse tool holders SK40 Der Fräsbalken ist um ca. 350mm ausfahrbar. The machine vise is not included in the delivery scope (see picture), but can be purchased additional! *

Condition: used, Technical details: table length: 1000 mm table width: 1000 mm weight of the machine ca.: 0,531 t Rodou Nkkkopfx Alrsu space requirements of the machine approx.: 1,0x1,0x0,8 m marking plate is on a robust welding construction 60mm steel angle. *

Condition: used, Technical details: floor-plate length: 660 mm floor plate width: 450 mm Rodpfxou Nkpyo Alrsu floor plate height: 70 mm passage opening in table: Ø 115 mm weight of the machine approx.: 111 kg space requirements of the machine approx.: 660x450x70 mm fall trough hole 115mm T-slots : according to DIN 650 and 508 a=22mm b=38mm h=40mm c=17mm *

Condition: used, Year of construction: 1979, Technical details: turning diameter over bed: 540 mm turning length: 630 mm centre distance: 900 mm center height over bed: 270 mm center height: über Hinterschlitten: 138 mm Turning diameter: über Hinterschlitten: 250 mm longitudinal feed: 700 mm facing movement : 80 / 75 mm revolution per minute: 1,8 - 450 bei 8x steples U/min clamping diameter: 26 mm range of feed in x - axis: 12 step / 0,063 - 0,63 mm/U range of feed in y - axis: 36 step / 0,070 - 1,11 mm/U tailstock quill: MK5 mm tailstock quill stroke: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,76 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the rear and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swivel range of the rear slide = 360deg. Swivel range of cross slide = 360deg. Lathe chuck is cone disc Ø 200mm with MK5 Equipment: turning mandrel Ø 49,5 x 400mm Measuring system ARBAH-L 3+1 Inverter FRENIC 5000G11 i.D. Redpevbhv Rofx Alrou *

Condition: used, Technical details: floor-plate length: 1100 mm plate width: 700 mm plate height: 85 mm weight of the machine ca.: 430 kg Rodpfxsu N Dyrs Alrsu Clamping plate, cast steel with T-slot according to DIN 650 a=25; h=41; b=48;c=24mm; center distance 76mm *

Condition: used, Technical details: Redpfju N Eczsx Alreu width: 350 mm depth: 120 ohne Platte mm height: 315 o.Platte mm 3 pieces available with base plate (A+B+C) 1 piece available without base plate (D) Dimensions of the base plate: W: 350 x D: 320 x Thickness: 30mm *

Condition: used, Technical details: Rsdpfx Alsu N E Dxsreu weight of the machine approx.: 160 kg dimension machine xH: 0,58 x 0,50 x 0,3 m swivable: nein ° rotation movement: 360 Grad Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck *

Condition: used, Technical details: grinding length: 300 mm grinding spindle - swivable: 350 ° grinding head adjustable: senkrecht: 250 mm adjustment of spindle-head: quer: 230 mm Rsdpfsu Ng Npox Alrju grinding head adjustable: neigbar +/-15° ° grinding diameter: Ø 250 mm spindle revolutions per minute : 2200 - 3500 - 5200 U/min work table:: B:120 x L: 950 mm table movement: Obertisch schräg: recht/links 45° mm table movement: größter Tischweg: 500 manuell mm surface of magnetic-table: 305 x 130 x 100 mm dimensions of grinding wheel: Topfscheibe 125 x 20 Ø 32mm mm total power requirement: 1,8 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,6 x 1,3 x 1,7 m dimensions of hydaulic: 600 x 550 x 870 mm Accessories: Universal clamping head cone MK5 Drill grinding holder Ø 10mm *

Condition: used, Technical details: width: 190 mm Rjdju S Hzujpfx Alrju depth: 315 mm height: 500 mm weight of the machine ca.: 60 kg 1 piece in the back of the photo T-slot to DIN 650: T-slot width a= 28; h= 42; b= 47.5; 19.5 mm, T-slot spacing 160 mm *