Used Wmw F Heckert for sale (483)

Condition: used, Bed length: 4500mm, control voltage: 220V, operating voltage: 380V, rated current: 110A, rated current, slow-blow fuse: 125A, connected load: 58kW, weight: 35t, with tailstock, clamping device, external electric motor for roll rotation, control panel, storage table, five steady rests and additional accessories. An on-site inspection is possible. Hfsdpozulg Nofx An Non

Year of construction: 1978, condition: ready for operation (used), A roll forming line by Instytut Obróbki Plastycznej (Poland) for plastic metal forming is available. Roll stations: 12, shaft diameter: 50mm, max. profile width: 300mm, max. profile thickness: 2mm, overall system dimensions X/Y: approx. 20m/4m. Including an automatic cut-off unit with an incremental length measuring system and a payoff reel. An on-site inspection is possible. Hfodezhw Swjpfx An Nen

Condition: good (used), Year of construction: 1963, 3 different eccentric presses, manuf. WMW 1 x crank press with one ram 16 t 1 x crank press with one ram 25 t Hedpfemi Rpisx An Nofn

Condition: good (used), three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck Hfedpfxsb Encce An Nen -DH250x3-III -TGL 30-2332 -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 140 mm -Bolt circle: Ø 172 mm -Through hole: Ø 80 mm -Weight: 28 kg

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck -Handover in its current condition as inspected Hedjc S D H Iopfx An Njfn -Thread cutting chuck without collets -with slip clutch -Cutting capacity: M24-M64 -Recording: MK5 -Quantity: 1x threading chuck available -Weight: 13 kg

Condition: used, Centerless grinders SASL 125 1A, 200x300, 125x250, KCH 63 Hodpfscup D Njx An Nofn

Condition: excellent (used), Standard holders and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Quantity: 3x Sassex/WMW drill chucks -Recording: MK6 -Total length: 600 mm -Pin holder: Ø 12 mm -Pen spacing: 77 mm -2x Sassex/WMW drill bit holders -Recording: MK6 Hfjdjc Iqrgjpfx An Njn -Total length: 620 mm -Pin holder: Ø 16 mm -Pen spacing: 96 mm Price: for all 5 pieces -Weight: 56 kg

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-slot plate comes from: a WMW drilling machine -Travel: approx. 1200 mm -Clamping plate width: 1405 x 1250 mm Hfodpfjdu U T Ujx An Non -Dimensions: 2900/1350/H940 mm -Weight: approx. 1200 kg

Condition: good (used), Machine vice, sturdy vice, drill press vice Hedpfx Ansb A Ntbe Nefn -Jaw width: 170 mm -Clamping depth: max. 120 mm -Dimensions: 480/170/H130 mm -Weight: 30 kg

Condition: excellent (used), Year of construction: 1989, Type: EDU / 80 DR EK ICH FQW / FQS Q ApW/Q ApSS Number: 1824/1989 Mounting: SK 50 Contact surface, W x H: 480 x 460 mm Hole spacing, W x H: 425 x 415 mm Gear diameter, internal / external: 75 / 100 mm Speed range: 18 to 2,800 rpm Condition: very good Weight: 280 kg Hsdpfxoh Ar Tyo An Nofn Dimensions: 560 x 410 x 1,000 mm

Condition: used, Tapping chucks, thread chucks, tapping chucks, milling tools, tapping attachments -Manufacturer: WMW, thread cutting chuck mount MK3 -Types: GB3 Hedpfxogul Tce An Nefn -Dimension: Ø 80 x 270 mm -Weight: 3.7 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Rohm, three-jaw chuck Chuck size: Ø 250 mm -Type: DH-B / 8-250 x 3 TGL 30-2332 -Throughout: Ø 40 mm - Hole circle: Ø 171 mm -Shot: short taper 8 -Weight: 24 kg Hfodeg Rcy Tspfx An Nsn

Condition: used, Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm Hfjdpfx Ajgiiwxen Non -Inside: Ø 50 mm -Hole circle: Ø 100 x 17 mm -Number of teeth: 160 teeth -Number: 8x saw blades available -Price: per piece -Weight: 6 kg/piece

Condition: good (used), Face driver, face driver, face driver, driver tip, face driver, face driver Hfsdpfx Aei I Hc Aon Njn -Manufacturer: WMW ABW Rapid, face driver -Type: MS4 / Rapid4 -Recording: MK4 -Quantity: 4 pieces available -Price: per piece -Front dimension: Ø 46 mm

Condition: used, Thread cutting head, thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, self-opening thread cutting heads type A2 13 pieces -Size: M16 x 1.75 recording MK3 2 pieces -Size: M10 x 1.5 1 piece -Size: Ø 17 mm 10 pieces -Price/tax: complete Hjdpjru Ra Sofx An Nofn -Transport dimensions: 400/250/H270 mm -Weight: 22 kg

Condition: used, Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW ABW, tapping chuck holder MK3 -Type: GB3 Hedorvlfcepfx An Nsfn -Bore: Ø 24 mm -Dimensions: Ø 80 x 264 mm -Weight: 3.7 kg

Condition: used, Year of construction: 1962, frequency 50 Hz voltage 380 V 220 V Hjdpfx Anjrxg S Ts Nofn connected load 2,6 kVA rated current 6,1 A weight of the machine ca. 1 t

Condition: used, Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: WMW Smalcalda, milling chuck SK40 5 pieces -Type: SK 40/B12 40908 3 pieces -Type: SK 40/B18 41076 2 pieces -Versions: see photos -Price/Delivery: complete Hodpfxjubfxke An Nsfn -Transport dimensions: 340/180/H70 mm -Total weight: 6.6 kg

Condition: used, table diameter 315 mm workpiece weight 50 kg centre height mm weight of the machine ca. 60 Kg Hsdpfjt Dqu Dsx An Nefn dimensions of the machine ca. 0,4 x 0,4 x 0,2 m vertical rotary table, Height from assembly space to centre of disk = 500 mm

Condition: used, Tool holder, milling holder, milling tool -Number: 7x SK40 mounts with tool carrier -Executions: different -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills Hfodpfxod S Unqj An Nen -Sale: only complete -Dimensions: 590/120/H210 mm -Weight: 12 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH: 200x3-III -TGL: 30-2332 Hjdpfx Anjd R Exdo Nsfn -Chuck size: Ø 200 mm -Weight: 16.7 kg

Condition: good (used), Clamping cylinder, hydraulic clamping cylinder, hydraulic clamp, pneumatic clamp, air cylinder, clamping cylinder for power chuck, hydraulic cylinder -Manufacturer: WMW, clamping cylinder stroke 15 mm -Type: 25 30-7312 -Shaft Ø 14 mm -Number: 12x clamping cylinders available -Price: per piece Hfsdpfxswziiko An Nen -Dimensions: Ø 50 x 96 mm -Weight: 1.2 kg/piece

Condition: ready for operation (used), Facing lathe DP 2000 Hjdpov Hx R Nofx An Nefn Chuck diameter 2000 mm Length 4500 mm 2 tool posts included with the machine Weight approx. 22 tons Video of the machine in operation available!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 40260, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, working width: 3,150 mm, cutting angle (max.): 2 °, stroke rate (min.): 1 1/min, stroke rate (max.): 25 1/min, sheet thickness (max.): 25 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 18 mm, back gauge adjustment: manual, back gauge: 1,000 mm, input voltage: 380 V, input current: 93 A, type of input current: three-phase, control voltage: 110 V, overall weight: 42,100 kg, total length: 5,040 mm, total width: 3,150 mm, total height: 3,600 mm, table width: 3,250 mm, Equipment: centralized greasing system, documentation/manual, finger protection, foot remote control, type plate available, Used ERFURT ScTP 25/3150 hydraulic guillotine for sale, manufactured by VEB Kombinat Umformtechnik Erfurt, Germany / GDR. Hsdpfx Aezh Dtzen Nofn The machine is in working condition and is located at an HMC production facility in Plovdiv. Complete technical documentation is available in German and Russian – passport, acceptance reports, electrical reports, electrical diagrams, technical drawings, and a transportation specification. Key data: Maximum cutting length: 3150 mm. Maximum cutting thickness: 25 mm for St 42 / 42–52 kp/mm². Capacity for St 50 – 23 mm, for St 60 – 21 mm, for St 70 – 19 mm. Cutting angle: 2.5°. Distance between columns: 3250 mm. Rear stop adjustable up to 1000 mm. Main motor: 40 kW, connected power: 42 kW. Power supply: 3 × 380 V, 50 Hz. Machine number according to the nameplate: 40260. The machine features conventional electromechanical control, a hydraulic clamping system, a cutting line indicator, an electrically and manually adjustable rear stop, four-edge cutting blades, and an electrical cabinet. Net weight according to the transportation specification: 41,500 kg. Gross weight: 42,100 kg. Dimensions of the main machine body: 5040 × 3040 × 2970 mm. Price: negotiable. Location: Plovdiv, Bulgaria. Inspection by prior arrangement.

Condition: used, Mitre Cold Circular Saw WMW (VEB GDR) Serial No. 189886 Year of manufacture: 1989 Saw blade diameter max. 300 mm Cutting range at 90° round approx. Ø 75 mm Square approx. 70 x 70 mm Cutting range at 45° round approx. Ø 55 mm Square approx. 50 x 50 mm Vice clamping width 100 mm Hfsdpoy Ra D Dsfx An Njn Saw blade speed 31.5 rpm Motor power 0.37 kW Connection 230 Volt, 50 Hz - Mitre adjustment up to 45° - Material vice - Mounted saw blade Ø 275 mm Dimensions (L x W x H) 600 x 600 x 700 mm Weight 47 kg Good condition