Parallel vice

WMW mit Elektrospanner

Condition: used, Parallel vice with electric clamp Njdpjbwy S Uofx Ab Tocn Jaw width 200 mm

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox Ncedpfxsn N Ekce Ab Ton - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition

Condition: new, Year of construction: 2025, 0330 mm 210 mm 1000 mm 167 mm 40 mm 2,2 kW Nodpfowp Tq Uox Ab Tecn

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool holders, and Losma filter system. Documentation available. On-site inspection is possible. Expected to be available from the end of January 2025. Nedsuxdhuspfx Ab Tecn

Condition: new, High quality benchtop bending machine with top of the line features. FLOTT TB 18 Plus (218303) Standard equipment: - Thread cutting device - Control panel with OLED display - Robust, high quality drill head hood with ergonomically inclined front - LED illumination - Quickly adjustable and ergonomic drill depth stop - Infinitely variable speed control via central rotary knob - EMERGENCY STOP button - Thermal overload protection - Spindle stop - Drill protection with electrical fuse - Connection cable with Schuko plug - 3 years warranty for one-shift operation Technical data: Continuous/normal drilling capacity (mm): 18/20 (in E335/ST60). Tapping capacity (depending on pitch): M12 spindle: MK II drilling depth (mm): 100 throat depth (mm): 240 column diameter (mm): 82 Usable working surface (W x L) (mm): 340 x 280 Speed display: Digital Drilling depth display: Digital Drilling depth stop: Quickly adjustable stop ring Feed (mm/rev): by hand Table height adjustment: with toothed rack motor three-phase current - frequency controlled, mains connection 230 V (kW): 0,75 spindle speed stepless (1/min): 30 - 3000 T-slot size (arm), distance (mm), dimension width (mm): number 2, 125, 13/26 spindle/working surface (mm): 155 - 415 (table), 155 - 550 (foot) machine dimension without packing (mm): 355 x 705 x 1065 machine dimension with packing (mm): 570 x 940 x 1612 Ncedei Hp Erepfx Ab Tjn weight (kg): 170 Note: For all other models, please feel free to contact us.

Condition: good (used), Year of construction: 1995, CNC cycle lathe MONFORTS KNC 6 year 1995 Control Monforts MTC K. Center distance : 2000 mm Max. turning diameter over bed : 630 mm Max. revolving diameter over plane support : 380 mm Spindle speed : 2 -1800 rpm Spindle motor : 21/15 Kw spindle bore : 71 mm Nsdpfx Abohktd No Tjcn 3-jaw chuck FORKARDT 400mm Tool holder Multifix size C with 3 tool pockets . Space requirement : Length 4000 mm Width2200 mm Height 1900 mm Weight.ca: 5000 Kg Complete machine documentation available. Machine can be demonstrated under current.

Year of construction: 1999, condition: ready for operation (used), Linck EWD pre-cutting group consisting of: - Linck EV 40 infeed table, with 1x pair of turning rollers Ncodpfxsufr Ndo Ab Tjn - EWD FZ 3 (mounted on PF19 frame with guide shafts DM 200mm) 2x drive motors with 75/45kW. 1 pair of pull-out rollers - Centering unit EVW - FR 14 side cutting saw with limit cutter 4 x 50KW + 2x 75kW - Side fabric separating transport - incl. hydraulic unit - without switch cabinets Machine is in very good condition! System can also be overhauled and offered with a new control system!

Year of construction: 1980, condition: good (used), A used very well preserved cycle controlled lathe from Weisser Heilbronn with SIEMENS control. centre distance 2000 mm centre height 295 mm Swing over bed 600 mm Swing over cross slide 260 mm Swing diameter in the bend 800 mm Nsdpfogyy I Aex Ab Tecn Total length of the crank 375 mm Bed width 450 mm Plan travel X-axis 350 mm Longitudinal travel Z-axis 1850 mm Spindle nose DIN 55022 size 8 Spindle speed Number 18 14 - 1400 rpm spindle bore 71,5 mm Diameter of front bearing 110 mm feed range 0,01 - 40,95 mm/rev rapid traverse 8 m/min Direct current drive 15 kW 400V 50Hz Max. permissible torque at the spindle 2500 Nm Tailstock quill 80 mm quill stroke 250 mm inner taper quill MK 5 Length x width x height Weight of the machine 5500 kg Accessories Tailstock Pneumatic three-jaw chuck with interchangeable jaws 315mm Quick change holder "MULTIFIX "in front of the center size "C Quadruple turret behind the center Tool holder Coolant device Pneumatic steady rest Technical data and dimensions: Errors excepted. Videoconference via whatsapp possible by appointment

Condition: reconditioned (used), Year of construction: 1984, Universal Tool Milling Machine DECKEL FP 3 With 3-axis active digital display Heidenhain TNC 11 Year of manufacture: 1984 Travel: X 500 / Y 300 / Z 400 mm Speed range: 25 – 2500 rpm Ncjdpfx Aboxuh Rds Ton Including the following accessories: - Rigid angle table, 850 mm x 400 mm clamping surface - Swiveling rotary table Ø 450 mm with dividing disks - Slotting head - Movable vertical milling head - Extendable quill for drilling - Infinitely variable feed via potentiometer - Various milling arbors SK 40 / S22 x 2 - Chip tray - Automatic central lubrication pump for X, Y, Z axis - Machine lamp - Coolant system - 4 machine feet - Operating manual

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, table length: 1,900 mm, table width: 1,100 mm, spindle speed (max.): 6,000 rpm, table load: 4,000 kg, position of the milling head: Vertikal, torque: 1,356 Nm, spindle nose: SK 50 - DIN 69871A, Equipment: rotational speed infinitely variable, BRAND NEW GANTRY MILLING MACHINE Control and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN 19" TFT display HEIDENHAIN package (motors, measuring systems, electronic handwheel) Spindle Power: Maximum spindle motor power: 30 kW ICS: Internal coolant supply, 70 bar Additional Equipment: Tool changer with double gripper, 60 positions Double screw conveyor (longitudinal) Hinged belt chip conveyor (transverse) Preparation for 4th axis (rotary table) Full enclosure, closed at the top Nsdpeq Ixc Tjfx Ab Tocn Accuracies: Positioning accuracy: ± 0.025 mm Repeatability: ± 0.020 mm Only inquiries from Germany will be answered.