Used Woodwop for sale (54)

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Numerical Control Power Control, Software WoodWOP Panels (workpieces) feeding by No. 3 motorized belts Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 50 Motorized carpet to evacuate chips and wastes Total installed power (Kw) 60 WORKING GROUPS (BOTTOM) Drilling heads with vertical spindles: No. 6 Indipendent vertical drilling spindles: No. 40 x 6 heads (tot. No. 240 spindles) Drilling head motor power: No. 6 x Kw 2,7 WORKING GROUPS (HORIZONTAL) Drilling heads with horizontal spindles: No. 4 (4 x Kw 2,7) Horizontal drilling spindles - Right side: No. 13 x 2 heads (tot. No. 26 spindles) Horizontal drilling spindles - Left side: No. 13 x 2 heads (tot. No. 26 spindles) Psdedg Itnjpfx Airogn Inserting nozzle and glue injectors (Right side): No. 8 (high-pressure) Inserting nozzle and glue injectors (Left side): No, 8 (high-pressure) Storage tanks for automatic feeding of the dowels: No. 2

Condition: refurbished (used), Numerical Control Type Power Control Professional Software woodWOP / TopDrill BST No. 2 Through-feed motorized conveyoring belts (4 x Kw ?) No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Pedpfx Aijdz Uk Terogn Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) Miscellanous Spindles for each drilling head of the bottom vertical supports No. 2 Top vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each top vertical unit (2 x Kw 1,5) Miscellanous Spindles for each drilling head of the top vertical supports No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 36

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis Goose-neck type Numerical Control Power Control PC85 - Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails- No. 10 Support rails (lenght mm 1500) LASER system on X-axe for the rails positioning and on Y-axe for the vacuum pods positioning Automatic Tools Changing System No. 2 Tools storage plates W8 (No. 8 folds) + (No. 3 folds) Max. useful working area (X - Y - Z) mm 6000 x max mm 1600 x mm 125 No. 4 Working areas - 2 x Vacuum pump (capacity m3/h) Separate electric and command cabinet Total installed power (Kw) 27,5 (ca.) WORKING GROUPS (TOP): Psdpfx Asr Ai Sqoiregn No. 21 Independent vertical boring spindles (High Speed 7500) No. 10 Independent horizontal boring spindles (No.6 in X-axe + No. 4 in Y-axe) Drilling head motor-power (Kw) 2,3 Circular Grooving Saw (tiltable 0°- 90°) diam. (mm) 125 (N1 X-Y 90°) No. Vertical electro-spindle: HSK63 Vertical electro-spindles motor power KW 9

Condition: excellent (used), Year of construction: 2021, CNC Gantry (Portal) flexible machine (Through-feed panel in horizontal position) Numerical Control Open powerTouch, Software WoodWOP (Ready for TAPIO) Pgsdpfx Aox Aqi Eeirsn In-feeding working table (panel support) + Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized conveyor belts Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Lateral Guide for sensitive Workpieces edges No. 3 Vertical Pressure Clamps Motorized carpet to evacuate chips and wastes. Built-in electric and command cabinet Total installed power: Kw 47 approx OPTIONAL: WIRELESS BAR CODE SCANNER N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR for X-Y-Z axis ): N° 4 Drilling heads V15 (4 x Kw 2.3) with No. 15 vertical spindles each (total top spindles No. 60) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR for X-Y-Z axis : N° 3 Drilling heads V32 (3 x Kw 2.3) with No. 32 vertical spindles each (total bottom spindles No 96) N° 3 Drilling heads V35 (3 x Kw 2.3) with No. 35 vertical spindles each (total bottom spindles No 105) N° 6+6 (total 12) horizontal drilling spindles in Y-axe N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads H21 (2 x Kw 2,3) with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side)

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Numerical Control PowerControl (Software woodWOP) Safety cabin (enclosure) of the working head Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) Pgodpfx Ajlkdpmoiren WEEKE Prepositioning Unit - to position workpieces in machines with clamp grippers faster. In-feeding working table (panel support) and Out-feeding table (with motorized belts) With pushing system to automatically infeed the workpiece Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 2500 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 23 Vertical drilling spindles (power Kw 2.3) No. 5 Horizontal drilling spindles (4 in X + 1 in y) WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 23 Vertical drilling spindles (power Kw 2.3) No. 5 Horizontal drilling spindles (4 in X + 1 in y)

Condition: excellent (used), AUTOMATIC MULTI-BORER "WEEKE" Pedeh Ryhnjpfx Airegn In line with another machine possible Numerical Control Power Control Software WoodWop (TOPDRILL BST 500) Through-feed motorized transport belts (No.) 2 (with adjustable speed) Horizontal units/supports (No.) 2 Drilling heads/Blocks for each horizontal unit (No.) 2 Spindles for each horizontal drilling head (No.) 11 Max. working width (mm) 3000 Min. working width (mm) 250 Bottom vertical units/supports (No.) 6 Drilling heads/blocks for each bottom vertical unit (No.) 2 Spindles for each drill head of the bottom vertical supports (No.) Various Top vertical units/supports (No.) 2 Drilling heads/block for each top vertical unit (No.) 2 Spindles for each drill head of the top vertical supports (No.) Vertical top pressure clamps (No.) 6 Transport belt to evacute chips (wastes) Quota (axes) digital display Total installed power (Kw) 26

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis (5 axis with FLEX 5) Gantry-drive (axe X) machine Numerical Control Control Powertouch (PC85) Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails Mod. K-Table Support rails (No.) 8 Table dimensions (mm) 1340 Automatic deplacement by CNC (X axis) of the Supports rails LED system (on the rails) for the vacuum pods positioning Clamps for workpieces fixing - POWERCLAMP Automatic Tools Changing System Tools storage plate (No. of folds-positions) 18 Max. useful working area (X - Y - Z) mm 4000 x mm 1550 x mm 60 Max. useful working area (X - Y - Z) in edge banding (mm) 4000 x mm 1500 x mm 60 No. 2 Working areas - Vacuum pump (capacity m3/h) 100/140 Separate electric and command cabinet Motorized carpet to evacuate chips and wastes Total installed power (52 A) WORKING GROUPS (TOP): No. 17 Independent vertical boring spindles (High Speed 7500) Pgjdpfxsw Dc Nio Airon No. 4 Independent horizontal boring spindles (No.2 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 2,2 No. 1 Vertical electro-spindles HSK63. Vertical electro-spindles motor power (KW 15) No. 1 Edge Banding head on board (axe Y) Power Edge, Glueing Unit (Hot Melt + Quick Melt Unit) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 1 reels/Coils) Pre-End cutting unit Crosshead aggregate (4 horizontal drilling spindles) N° 1 Circular saw aggregate (diam. mm 125) Combined aggregate (Flush-Trimming/Scraping)

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Goose-neck type - Front emergency carpets Numerical Control Type PowerControl PC 85 - Software WoodWop No. 10 Supports/Rails (mm 1340) Psdpfx Aish Ucn Rsrsgn LED system (on the rails) for the vacuum pods positioning Automatic Tools Changing System (Store at No. 18 folds) Max. useful working area (X - Y - Z) mm 6175 x 1550 x 60 Max. useful working area (X - Y - Z) in edge banding mm 6000 x 1475 x 60 No. 2 Working areas - No. 2 Vacuum pumps (capacity m3/h 100 each) Motorized carpet to evacuate the wastes from the working process Total installed power KW 27 Working groups (top) No. 17 Independent vertical boring spindles (power of the drilling head Kw 2,2) No. 4 Independent horizontal boring spindles No. 1 Vertical main Electro-spindle HSK F63 Kw 11 No. 1 Circular Saw 0°-90°) diam. (mm) 125 No. 1 Edge Banding head on board (axe Y) Power Edge, Glueing Unit (Hot Melt + Quick Melt Unit) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 2 reels/Coils)

Condition: used, Year of construction: 2007, functionality: fully functional, For sale: vertical CNC machining center Weeke Optimat BHX 500, year 2007, designed for drilling, milling, and slotting panel materials in the furniture industry. The machine allows fast and precise processing of components and is suitable for both series and custom furniture production. Technical specifications: Model: Weeke Optimat BHX 500 Year: 2007 Machine type: 3-axis continuous CNC machining center CNC control: WoodWOP (Homag / Weeke) Maximum workpiece length: approx. 3050 mm Maximum workpiece width: approx. 1200 mm Maximum workpiece thickness: 80 mm Minimum workpiece length: approx. 200 mm Podpsywgb Nsfx Airsgn Minimum workpiece width: approx. 70 mm Equipment: Drilling head with multiple vertical and horizontal spindles 96 drilling spindles (48 top, 48 bottom) 36 vertical tools 12 horizontal tools Slotting saw Milling cutter (top and bottom) 125 mm saw, rotatable 90° Automatic clamping workpiece transport Applications: Drilling for dowels and fittings Milling and slotting Processing of particleboard, MDF, HDF, plywood, and solid wood Advantages: Ability to process two pieces simultaneously, significantly increasing productivity Quick setup and workpiece change High precision in drilling and milling Ideal for manufacturing case furniture, kitchens, cabinets, and interior fittings Condition: Machine is regularly maintained and operational Test run possible upon inspection Delivery: June 2026

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis Goose-neck type Numerical Control Power Control - Software woodWOP Safety cabin (enclosure) of the working head Pedpfxsyxn Tij Airogn Working table with pods and rails- No. 6 Support rails Front emergency carpets LASER system on X-axe for the rails positioning and on Y-axe for the vacuum pods positioning Automatic Tools Changing System No. 2 Tools storage plates W8 (No. 8 rear spaces) + (No. 8 lateral spaces) Max. useful working area (X - Y - Z) mm 3130 x 1250 (1550) x 100 (150) No. 2 Working areas - 1 x Vacuum pump (capacity 70 m3/h) Motorized carpet to evacuate chips and wastes Separate electric and command cabinet Total installed power A 32 WORKING GROUPS (TOP): No. 12 Independent vertical boring spindles (High Speed 7500) No. 6 Independent horizontal boring spindles (No.4 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 2,3 Circular Grooving Saw (tiltable 0°- 90°) diam. (mm) 125 (N1 X-Y 90°) No. 1 Vertical electro-spindle: HSK63 (KW 9) OPTIONAL: Drilling Group with No. 4 horizontal boring spindles (Crosshead) PROFESSIONAL BARCODE READING SYSTEM

Condition: used, Year of construction: 2007, operating hours: 39,359 h, functionality: fully functional, machine/vehicle number: 0-201-04-0605, Description of the Main Equipment: Clamping table with matrix aluminium construction Vacuum system prepared for 1000 m³/h nesting technology Power Control control panel with PC85 Main spindle 15 kW with vibration sensor C-axis with aggregate interface Interface for FLEX-5 aggregate Pgsdpsyucyzefx Airen Plate-type tool changer with 10 positions Drilling unit: 13 spindles – 9 vertical and 2+2 horizontal spindles Software package for office computer WoodWOP Tools software Maximum positioning speed: 80 m/min in X and Y directions (vector speed: X/Y = 113 m/min) / 30 m/min in Z direction

Condition: excellent (used), Numerical Control Type Power Control PC85T Software WoodWOP + TOPDRILL No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Pgsdoyv Ev Ajpfx Airon Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 35

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 380 mm, number of axes: 5, This 5-axis HOMAG PROFI BOF 722/58/18/F/K was manufactured in 2005, featuring a machining range of X = 6000 mm, Y = 1800 mm, and Z = 380 mm. It includes a 5-axis fork head replaced in 2019 and two traveling plate changers with 18 slots each. Ideal for advanced woodworking, consider the opportunity to buy this HOMAG PROFI BOF 722/58/18/F/K CNC processing center. Contact us for more information about this machine. • 5-axis fork head (replaced in 2019) • Rear spindle with Flex5 unit • 2 traveling plate changers, 18 slots each • Second vacuum pump, switchable individually Additional equipment Podpfjx D Hxfjx Airogn • Computer with Windows 10 (new ~1.5 years ago) • WoodWOP 8.1 software

Condition: ready for operation (used), Year of construction: 2003, number of axes: 4, spindle speed (max.): 18,000 rpm, This 4-axis HOMAG PROFI BAZ20/30/16/V/D was manufactured in 2003. It features a Homatic CNC control, WOODWOP CNC programming, an 18-position disk changer, and a main spindle with a 12 kW three-phase motor. Capable of handling workpieces up to 3000 mm in length and 1400 mm in width, it includes a continuous table with adjustable vacuum clamps. Consider the opportunity to buy this HOMAG PROFI BAZ20/30/16/V/D CNC Wood Machining Centre. Contact us for more information. • Control/Software: Homatic CNC control; WOODWOP CNC programming system; Postprocessor Pjdpfx Aox D Ribsiregn • Workpiece capacity: • Length 800–3000 mm; Width 350–1400 mm; Thickness max. 70 mm with edge / 80 mm milling • Frieze width min. 120 mm; Weight max. 150 kg • Table/Clamping: • Continuous table (D-table) • Longitudinal console 1 fixed; Longitudinal console 2 manual Y-width adjustment • 8 vacuum clamps 125 x 50 x 100 mm • Working height lower edge of workpiece 950 mm • Unit for moving vacuum clamps on unit carrier with pneumatic extension console (max. 4 clamps per longitudinal console) • Width adjustment (longitudinal console/D-table): Servo drive, per longitudinal console • Stop bolt for top layer overhang: Lifting/rotating device, max. 20 mm top layer, stroke 110 mm, individually selectable, end-position monitored (for manual door placement) • Main spindle: • Speed 1500–18000 rpm (VFD 15 kW), full rated power from 12000 rpm • Tool diameter max. 180 mm (milling) / 200 mm (grinding); Room extraction for all tools/units • Aggregate interface/C-axis: • Pneumatic and swivel drive interface • C-axis with torque drive and 3-point support • Tool changer: • 18-position disk changer for HSK F63; tool weight 6 kg; tool length max. 200 mm • Configurations: 18 x Ø max. 130 mm; or 9 x Ø max. 180 mm + 9 x Ø max. 70 mm; grinding tools Ø max. 200 mm • Changer raisable for traveling pickup (left side) • Units/aggregates (for tool changer unless noted): • Drilling/milling unit, 4 spindles: ER25 up to Ø16 mm shank, protrusion max. 50 mm, speed max. 13500 rpm, unlimited swivel via C-axis • Lock case milling unit, 2 spindles D=16/20: counter-rotating, 12000 rpm, integrated blow-out, unlimited swivel via C-axis • Swiveling saw/drill unit: manual 0–90°, flange Ø30 mm, TK Ø52 mm, prepared for crosscut saw Ø max. 180 mm, drill chuck with Weldon D=10 mm, speed max. 9000 rpm, C-axis swivel • Milling cutter holder D=30 with chip guide: mandrel length 45/80 mm, chip guide plate controlled via C-axis, changer space Ø 140 mm • Flush milling unit: simultaneous top/bottom, edge radius max. R12 mm, min. outer radius ~R5 mm / inner radius ~R30 mm at 90°, scanning top/bottom/side, unlimited C-axis swivel, speed max. 12000 rpm, workpiece thickness max. 50 mm, min. overhang ~35 mm, with narrow feeler shoes • WPL knife head: run-out angle 5°, Ø 70 mm • Gluing/edgebanding equipment: • Drive spindle/V for gluing units: mounted right side of boom; cross slide with Y anti-reb and Z extension stroke; anti-reb spindle with C-axis and electrical/electronic interface; dedicated Z-axis • Gluing unit 4 sides, 90 mm (for main spindle): straight edges with direct glue application; 1 pre-press roller + 1 pneumatic post-press roller (programmable); inner radius min. R40 at 90°; edge height max. 90 mm; veneer thickness 0.4–1 mm; folding pressure zone on main spindle with hot-melt reactivation • Edge hold-down device, manual adjustment • Magazine/pickup: • Pickup space on X-support for interchangeable special unit (e.g.

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, travel distance X-axis: 4,175 mm, travel distance Y-axis: 1,550 mm, workpiece height (max.): 40 mm, number of spindles: 30, travel speed (max.): 80,000 mm/min, TECHNICAL DETAILS Travel range X-axis: 4,175 mm Travel range Y-axis: 1,550 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Podpsyttcwofx Airjgn Travel speed Z-axis: 30 m/min Maximum workpiece height: 40 mm Number of suction traverse beams: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling in X-direction: 10 Total number of spindles: 30 Milling unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool changer Liquid-cooled Saw unit Tool magazine 1 Number of slots: 18 Tool magazine 2 Number of slots: 10 EQUIPMENT NC positioning of suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for installation, securing, and usage of the machine at the destination. External reference: 7350

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Machine number: 559969 Manufacturer: HOMAG Model: PROFI BAZ 723/42/18/KC Year of manufacture: 2004 Technical details: Weight approx.: 10000 [kg] control: PC85 [] Dimensions (l x w x h) approx.: 39000 x 3200 x 3200 [mm] c-axis: ja / yes [] software: WoodWOP [] working length x-axis: max. 4.200 [mm] working width y-axis: max. 2.075 [mm] main spindle: 2x 14,5 [kW] tool changer: 2x 18-fach / 2x 18-fold [] vacuum pump: 2x 100 [cbm/h] edge gluing unit: ja / yes 360° [] path-feed rate max. X-axis: 80 [m/min] path-feed rate max. Y-axis: 60 [m/min] path-feed rate max. Z-axis: 40 [m/min] Pjdsxvy Ukjpfx Airjgn Item Description High-End-equipped, technically well maintained HOMAG PROFI BAZ 723/42/18/KC CNC Machining Center in portal design with 360° edge glueing unit, 2 main spindle with C-axis, automatically positionable clamping consoles and HOAMG Optimat TBP 370 vacuum feeder in in portal design. The original price was approx. 620.000 EUR. Technical data and equipment of the HOMAG Profi BAZ 723 CNC: - Workpiece length for single operation max. 4.200 mm - Workpiece length cutter Ø 25 mm for pendulum operation max. 2.040 mm - Workpiece length glueing for pendulum operation max. 1.850 mm - Workpiece width (cutter Ø 25 mm) max. 2.075 mm - Workpiece width (glueing) max. 1.950 mm - Workpiece width (all aggregates) max. 1.850 mm - Console table KC-System 2 pieces left/right automatic positioning of the consoles and vacuum clamps - First main spindle with C-axis motor 14,5 KW speed 0 - 24.000 U/min tool changer 18-fold (without tools, HSK holders and aggregates!) drill head 17 spindles vertical (7 spindles X-direction, 11 spindles Y-direction) drill head 4 spindles horizontal 4-SP+Sawe 0/90 dedree blow-off nozzle pneumatically on carrier - Second main spindle with C-axis motor 14,5 KW speed 0 - 24.000 U/min tool changer 18-fold (without tools, HSK holders and aggregates!) drill head 17 spindles vertical (7 spindles X-direction, 11 spindles Y-direction) drill head 4 spindles horizontal 4-SP+Sawe 0/90 dedree blow-off nozzle pneumatically on carrier - Edge gluing aggregate 360° glue with butt joint mounted on the right side of the portal with Y-axis drive Drive spindle with C-axis edge height max. 65 mm edge thickness 0,4 - 3 mm pre-cutting station and 2-fold roller magazine - Chip conveyor belt for automatic disposal with ascending conveyor (The tools, the HSK holders and the units for the tool changer are not included within delivery. A transport rack from HOMAG is required for transportation of the dismantled machine. Terms of payment and delivery Delivery terms: ex foundation, unpackaged Payment terms: 100% before loading Warranty: Without any warranty

Condition: excellent (used), Year of construction: 2011, used CNC machining center Nesting machine Manufacturer: Weeke Model: Optimat BHP 210 Year of manufacture: 2011 4-axis nesting machine O-TRIX work table 3700 x 2200 mm Vacuum pump 3 x 300m³/h with frame X-axis working area: 3700 mm Y-axis working area: 2100 mm Z-axis working area: 100 mm 25 vertical drilling spindles Milling spindle 12 kW up to 24,000 rpm with C-axis, 360° interpolation, liquid circulation cooling Air blast nozzle at milling tool, integrated in extraction hood – 14-fold tool changer, rear-mounted Podpfx Asymzfgeirsgn Lifting table for the system 3700 x 2100 mm, load capacity 3500 kg Stacking height 480 mm Intermediate handling table Vacuum arm for raw panel positioning, infeed bracket Ejector, conveyor belt 4000 x 2100 mm POWERCONTROL PC 85 control with 17″ TFT WoodWop 6.0 incl. MDE and production list software Woodnest Complete and Woodnest Professional Delivery includes only illustrated tools and HSK holders!

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 0-201-22-3325, functionality: fully functional, workpiece length (max.): 5,800 mm, workpiece width (max.): 1,200 mm, controller model: Homatic-CNC System PC83 mit Windows NT 4.0, feed rate X-axis: 80 m/min, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine on 20/03/2026! 4-axis CNC machining center for drilling, milling, edge banding, and finishing: - Saw and crosscutting unit for tool changer - Drilling and milling unit (4 spindles) for tool changer - Combination flush-trimming and finishing unit for tool changer - Blow-off nozzle for workpiece edge, compatible with tool changer Attention: Except for the units listed above, no vacuum suction cups, tools, or tool holders (even if visible in images) are included in the scope of delivery! TECHNICAL DETAILS Console clamping table "K": 12 adjustable consoles for holding vacuum cups with longitudinal and lateral stops, 4-fold occupancy - Max. workpiece length (single occupancy): 5,800 mm - Max. workpiece length (pendulum mode): 2,200 mm - Max. workpiece width: 1,200 mm - Max. workpiece thickness (using standard 100mm-high cups) with edge: 60 mm (if extraction hood is in position 1) - Max. workpiece thickness (using standard 100mm-high cups) without edge: 60 mm - Max. workpiece thickness (using standard 100mm-high cups) without edge: 120 mm (if extraction hood is in position 2) Support equipment - Drilling head: 17 vertical spindles - 2x main spindle 12 kW, water-cooled, for HSK (speed 18,000 rpm with C-axis and 12-position carousel tool changer) - Separate Y-axis for second main spindle and interface for aggregates with integrated pneumatic and electrical connections - Electronic supply and swivel drive Pgsdoyic Tujpfx Airsn - C-axis: swivel range without limitation Edge banding unit, 360°, for insertion into right main spindle - Max. edge height: 65 mm - Pickup station right, for depositing edge banding modules - Pre-cutting station and 3-position roller magazine Adapter units - Combination flush-/radius trimming and finishing unit (profile scraper knife) - Saw and crosscutting unit - 4-spindle drilling/milling unit (crosshead) - Blow-off nozzle for workpiece edge MACHINE DETAILS - Control: HOMATIC control PC 83 with Windows interface (NT 4.0) EQUIPMENT - WOODWOP programming system, version 5.0 - Network connection - Laser positioning aid - Chip conveyor - Safety: pressure-sensitive floor mats at front, side safety cage; rear: wall installation Note: A loading aid can be provided for a deposit of €5,000. Upon return, the deposit will be refunded minus 10%.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,700 mm, travel distance Y-axis: 1,550 mm, feed rate X-axis: 96 m/min, feed rate Y-axis: 96 m/min, rotational speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel X-axis: 3,700 mm Travel Y-axis: 1,550 mm Stroke X-axis: 4,538 mm Stroke Y-axis: 1,952 mm Podpfx Aisxw Up Ssregn Maximum workpiece clearance: 100 mm Movement speed X-axis: 96 m/min Movement speed Y-axis: 96 m/min Movement speed Z-axis: 25 m/min Number of controlled axes: 3 axes Number of drilling spindles: 7 Number of tool positions: 8 Nesting Table Length: 1,550 mm Width: 3,700 mm Material: Bakelite Number of pumps: 4 Individual capacity: 108 m³/h Drilling Unit Unit: top Spindles for vertical drilling: 7 Milling Unit Unit: top Number of controlled axes: 3 automatic tool changer: yes Motor power: 9 kW Max. speed: 24,000 rpm MACHINE DETAILS Installed total power: 26 kW EQUIPMENT Vacuum pump Control system PC85 Software WoodWOP CE marking Safety light curtains Note: Tools are not included in the offer.

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: 0-250-15-0310, functionality: fully functional, travel distance X-axis: 6,250 mm, travel distance Y-axis: 1,300 mm, number of slots in tool magazine: 9, rapid traverse X-axis: 80 m/min, workpiece diameter (max.): 60 mm, TECHNICAL DETAILS Travel Paths Travel distance X-axis: 6,250 mm Travel distance Y-axis: 1,300 mm Rapid Traverse Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 60 m/min Rapid traverse Z-axis: 20 m/min Stroke X-axis: 8,360 mm Stroke Y-axis: 2,015 mm Psdpfexdw Tgsx Airogn Main Spindle Motor Power: 9 kW Number of controlled axes: 3 Number of drilling spindles: 50 Maximum workpiece diameter: 60 mm Tool positions: 9 (8 in tool magazine 1, 1 in tool magazine 2) MACHINE DETAILS Installed total power: 18 kW Control system: HOMATIC-200 Control model: WOODWOP 7.0 Safety standard: CE marking EQUIPMENT Documentation/manual Infinitely variable speed control Automatic tool changer Vacuum pump Worktable with vacuum console supports Suction elements for workpiece holding 1 milling unit 2 drilling units (each with 25 drilling spindles) 2 cutting units Note: Tools are not included in the sale and delivery scope.

Condition: excellent (used), HOMAG BOF 211 – CNC Machining Center with 4-Axis Technology Reliable CNC machining center with extensive features and in notably excellent condition. — Technical Specifications • Machine type: CNC machining center • Axes: 4-axis technology (including C-axis) • Traversing paths X/Y/Z: approx. 6,000 × 1,400 × 150 mm • Control: HOMAG powerControl • Vertical main spindle: HKS • Tool changer: for multiple tools • Drilling heads: for vertical and horizontal operations • Aggregate interface: milling, drilling, grooving, sawing, etc. • Vacuum clamping system: matrix nesting or console table • Optional: edge banding and labeling — Features • Dimensional accuracy and repeat precision • Robust construction, well-maintained condition • Software support via HOMAG powerTouch / woodWOP • Suitable for furniture and interior fittings — The machine is available immediately. Dismantling and transport can be arranged by our service team upon request. — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT. Subject to change and errors excepted. Podsxk Tumspfx Airegn

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, feed length X-axis: 4,200 mm, feed length Y-axis: 1,600 mm, Homag Centateq E-310 / Profi BMG 310/42/16/F/V/K Prepared for one main spindle with gluing unit, mounted to the right of the gantry crossbeam. 5-axis main spindle, 12 kW Drilling head with 31 spindles: 21 vertical and 10 horizontal Grooving saw blade, tiltable 90° Blowing nozzle for 60 mm edge Circular tool magazine for 32 tools, HSKF63 Linear tool magazine with 8 positions Circular magazine with 10 positions Power Edge Pro Duo gluing unit Safety control with bumper Chip conveyor Vacuum pump Psdpox Irzcofx Airegn PowerTouch, WoodWop control software

Condition: ready for operation (used), functionality: fully functional, controller model: POWER PC 85 + WOODWOP 6.0, working width: 850 mm, working height: 60 mm, working length: 3,050 mm, TECHNICAL DETAILS Working dimensions: 3,050 x 850 mm Working height: 12 - 60 mm Drilling Head Vertical spindles X-axis: 8 Vertical spindles Y-axis: 5 Horizontal spindles X-axis: 4 Horizontal spindles Y-axis: 2 Milling Head Axes: 3 Tool change: Automatic Pedjydmcrspfx Airegn Diameter of integrated saw unit: 100 mm MACHINE DETAILS Control: POWER PC 85 + WOODWOP 6.0 (updated in 2023) EQUIPMENT 4-position tool changer

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-250-12-2554, functionality: fully functional, workpiece length (max.): 1,000 mm, workpiece width (max.): 3,000 mm, workpiece height (max.): 80 mm, controller model: PC 85, TECHNICAL DETAILS Workpiece width min.: 250 mm Workpiece width max.: 3,000 mm Workpiece length min.: 100 mm Workpiece length max.: 1,000 mm Workpiece height min.: 8 mm Workpiece height max.: 80 mm Upper vertical working unit ETP-6 vertical spindle power: 6 kW Grooving cutter diameter: 125 mm Pgsdpfsydnu Njx Airjn Vertical drilling spindles: 32 (power 2.7 kW) Horizontal drilling spindles: 10 (8 in X + 2 in Y) Lower vertical working unit ETP-6 vertical spindle power: 6 kW Grooving cutter diameter: 125 mm Vertical drilling spindles: 32 (power 2.7 kW) Horizontal drilling spindles: 10 (8 in X + 2 in Y) MACHINE DETAILS Control: PC 85 Software: woodWOP 6 EQUIPMENT Safety enclosure for tool set 2 clamping chucks for securing and moving the workpiece during machining Loading bench with air cushion table Powered roller conveyor for panel discharge Capability for simultaneous processing of two panels

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 0-201-09-5124, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,650 mm, controller model: Homatic PC 85 Power Control, TECHNICAL DETAILS X-axis working range: 6,000 mm Y-axis working range: 1,650 mm – up to 1,750 mm for milling Max. travel height during edge banding: 60 mm Max. applicable edge height: 65 mm Minimum internal radius: 30 mm Automatic tool changer: 18 positions Drilling head: 27 spindles (4 kW) Max. unit saw blade diameter: 200 mm MACHINE DETAILS Control system: Homatic PC 85 Power Control Software: WoodWop Electrospindle C Vector: 11 kW, HSK F63 Edge specification: Rolls, PVC / ABS 0.4 - 3 mm Pgjdsydl Nwspfx Airen EQUIPMENT 10 adjustable support rails for vacuum cups Loading and unloading aid with 8 pneumatic rods Vacuum cup positioning with laser system Edge banding unit with 360° rotation, glue pot, and preheater for granular EVA glue Rubber-coated pressure roller + Rubber-coated pressure roller Preheating lamp Edge trimmer and edge scraper Edge holder magazine Front and side safety system with carpets Protective cage around access area Chip extraction with motorized conveyor belt Air conditioning for machine control cabinet Automatic lubrication system Vacuum pump