Used Work Bed for sale (52,624)

Condition: ready for operation (used), Year of construction: 2000, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 28217, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, overall weight: 18,500 kg, The combination of the Zayer 20 KF 3000 machine, the Heidenhain TNC 426 control system, and a swivel universal head (Huron type) transforms this milling machine into a versatile and powerful production hub. The swivel head completely eliminates the biggest drawback of large machines – the need to constantly reposition and re-clamp heavy workpieces for machining at different angles. Here’s how precisely this head works with the Heidenhain system and what possibilities it offers. Kinematics and capabilities of the swivel head. The head in ZAYER machines consists of two inclined dividing planes that rotate relative to each other. This design allows for: Transition from vertical to horizontal: In a few moments, you can change the machine from a vertical machining center to a horizontal milling machine. This makes it possible, for example, to simultaneously machine the top of a workpiece and, a moment later, mill its sides. Milling at any angle: The head allows you to position the spindle in space at unusual angles, which is crucial for machining inclined surfaces, chamfering large plates, or creating converging pockets. Enormous rigidity: Although the head is movable, its design locks with tremendous force (mechanically or hydraulically). The machine does not lose any of its ability to perform heavy rough machining (so-called “hogging” with a large chip). Cycle 19 and PLANE in Heidenhain TNC 426 – The magic of software. The biggest challenge with a swivel head is the mathematics – when you tilt the tool, the zero points in the X, Y, and Z axes change. Heidenhain TNC 426 solves this automatically using dedicated geometric functions: Cycle 19 (Machining Plane): You inform the control system of the angle at which you have physically rotated the head. The computer immediately recalculates the entire coordinate system. The tool moves in the axis at an angle, and you program as if you were working on a flat surface. Coordinate transformation: You don't have to manually calculate the tool offset after rotating the head. The controller knows the exact dimensions of the machine's kinematics and automatically corrects the position of the X, Y, and Z axes. Angular drilling: After calling Cycle 19, the standard drilling cycle (e.g., deep drilling) automatically performs the feed movement in the inclined axis – the operator writes the program in the Z axis, and the machine physically moves with a combination of the X, Y, and Z axes. Production benefits in the workshop. Machining 5 sides of a workpiece from a single setup: You place a 5-ton steel block on the table. You clamp it once. By rotating the head, you machine the top and all four sides without moving the workpiece with a crane. This guarantees perfect maintenance of geometric tolerances (perpendicularity and parallelism of the surfaces). Time savings and safety: Repositioning a large workpiece on the table often takes hours and carries the risk of accidents or damage to the table. With this head, you only reposition the tool – manually using dividing plates or in an automatic version from the program. Bedpfxozrd Tve Anpslp

Condition: excellent (used), Year of construction: 2013, EMMEGI DIAMANT XL 7700 – CNC Profile Machining Center – 4 Axes – Year of Construction 2013 Manufacturer: EMMEGI S.p.A., Italy Model: DIAMANT XL 7700 Machine Type: CNC Profile Machining Center Year of Construction: 2013 Serial Number: C114811 Control System: CNC control system with 15-inch TFT color display Number of Axes: 4 CNC-controlled axes Technical Data Travel Distances and Axes * Number of CNC-controlled axes: 4 * Travel distance X-axis (longitudinal): 6,500 mm * Travel distance Y-axis (transverse): 1,095 mm * Travel distance Z-axis (vertical): 800 mm * Swivel range A-axis: 0° to 180°, continuous * Rapid traverse rate X-axis: 80 m/min * Rapid traverse rate Y and Z axes: 64 m/min * Rapid traverse rate A-axis: 10,000 °/min * Positioning accuracy over 1,000 mm: ±0.15 mm Milling Spindle and Tool Holder * Main spindle power S1: 7.5 kW * Maximum spindle speed: 20,000 rpm (HSK F63) * Up to 24,000 rpm with ISO 30 according to technical documentation * Tool holder: HSK F63 / ISO 30 depending on configuration * Tool magazine: 9 positions with HSK F63 or 10 positions with ISO 30 * Tool change time: under 16 seconds (HSK F63), under 18 seconds (ISO 30) Tool Dimensions * Maximum milling/drilling tool diameter: 63 mm * Maximum tool length: 168 mm * Disc milling cutter HSK F63: up to Ø 250 mm * Disc milling cutter ISO 30: up to Ø 180 mm Clamping System and Work Areas Bodpe Af U Aiofx Anpjlp * 2 independent work areas on the X-axis * 6 clamping devices as standard * Optionally up to 12 clamping devices * Automatic positioning of the clamping devices * 2 stops in standard design * Optionally up to 4 stops CNC Control and Software according to technical documentation * CNC configuration: Pentium 3, 1 GHz, 256 MB RAM * Display: 15-inch TFT color display * Keyboard * 2 COM interfaces * 2 USB interfaces * Network interface * Operating system according to documentation: Windows 2000 Professional * Software: CAM, Editor, Drill * CAMPUS software included according to documentation Electrical and General Data * Year of construction: 2013 * Voltage according to nameplate: 400 V, 3 phases, 50 Hz * Connected power according to nameplate: 25 kW * Rated current according to nameplate: 36 A * Weight according to nameplate: approx. 7,000 kg * Operating pressure, compressed air: 6 bar * Air consumption per cycle: 165 l/min Equipment Visible in the machine photos: * CNC control panel with screen and keyboard * Separate hand-held operating unit * Automatic clamping system with multiple profile clamps * Enclosed machining area with protective cladding * Long bed for profile machining * Emergency stop switch * Pneumatic connections

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Bledpfsxdmgvjx Anpsp Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, The Zayer ZF1700 is a CNC milling machine designed for machining workpieces, equipped with a Heidenhain control system. The Zayer ZF1700 features a working area of X: 1,420 mm, Y: 880 mm, Z: 650 mm, a maximum spindle speed of 3,000 rpm, and a weight of approximately 9,000 kg. Main technical specifications: Machine type: CNC milling machine. Control: Heidenhain TNC 150. Working area (X/Y/Z): 1,420 mm / 880 mm / 650 mm. Spindle speed: Up to 3,000 rpm. Weight: Approx. 9,000 kg. Bedow Tq A Ijpfx Anpelp Dimensions (W/D/H): 3,557 mm / 5,200 mm / 2,750 mm.

Condition: used, Year of construction: 1980, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: Universal bed-type milling machine Machine weight: approx. 11 tons Travel distances X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 630 mm Spindle and tool holder Spindle taper: SK 50 Speed range: 20–2,000 rpm Horizontal milling spindle: SK 50 Vertical milling spindle: SK 50 Feed rate and rapid traverse Feed rate: 10–6,000 mm/min Rapid traverse: 6 m/min Bedj Aa Ahropfx Anpolp Work table Table load: max. 5,000 kg Control system Control system: Philips NC 6664 Axes: 4 Program memory: available Rotary table Rotary table: NC-controlled Diameter: 630 mm Electrical data Total power requirement: 18 kW Control cabinet Control cabinet dimensions: 1,800 × 530 × 2,000 mm Dimensions Space requirement: approx. 4.6 × 2.9 × 2.62 m EQUIPMENT NC-controlled rotary table Hydraulic tool clamping Coolant system Chip conveyor Horizontal milling spindle Vertical milling spindle Separate control cabinet Safety emergency stop Important note: The machine vice, if visible in the pictures, is not included in the scope of sale and delivery!

Condition: used, Year of construction: 2017, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2017 Control : Heidenhain TNC 640 Speed : 5000 rpm Movement X/Y/Z : 4500/1800/1300 mm In General: Bljdpfx Ans Ahu Hajpjp Year of manufacture:2017 Control system:Heidenhain TNC 640 Travel range X/Y/Z:4,500/1,800/1,300 mm Spindle speed:5,000 rpm Tool holder:SK 50 Milling head (spindle): Technology:Diagonal head with gear spindle Index:0.001° Speed:5,000 rpm Tool holder:SK 50 Max. power:43 kW Max. torque:1,045 Nm Coolant supply:Coolant + blast air Working table: Clamping surface:6,000 x 1,100 mm T-slots:6 x 22H12, spacing 140 mm Tool magazin: Technology:Chain magazine Number of stations:40 Tool changer:Double gripper (horizontal/vertical) Max. tool diameter:125 (250) mm Max. tool length:400 mm Equipment: Position measurement systems:Direct scales Chip removal:Chip conveyor Coolant supply:Internal coolant system with filter, 20 bar Workpiece measurement:Funk M&H probe Set-up operation:HR 510 electronic handwheel Software option:Adaptive Control

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, CNC control: HEIDENHAIN iTNC 530 (HSCI) with a 15.1" flat-screen display and a pivoting control panel 2. Work table / Clamping surface Length: 2,200 mm Width: 1,000 mm Maximum transport load: 7,200 kg Number of T-slots: 7 Size of T-slots: 22 H12 mm Reference slot: 22 H7 mm T-slot spacing: 140 mm 3. Automatic milling head (Option -AIH60A OIL) Design: Diagonal, swiveling in 2 planes Speed range: 0 – 6,000 rpm (Option) Tool holder: DIN 69871 AD (ISO 50) / Taper DIN 69871 Draw bolt: DIN 69872 Form A Tool clamping force: 15,000 N Lubrication: Automatic grease cycle lubrication (housing made of steel cast GS 60, designed for 45 kW and max. 2,000 Nm) 4. Main spindle drive motor / Manufacturer: Siemens, main spindle drive, Type: 1PH7 Drive power max. (Option): 36 kW from 376 rpm (standard equipment 30 kW) Maximum torque (Option): 930 Nm (constant up to 376 rpm; optional in gearbox up to 1,460 Nm or 1,750 Nm) Speed control / Gearbox: 3-stage (oil-cooled) with automatic switching and helical gears made of hardened chrome-nickel steel Spindle speeds (6,000 rpm Option): Low range: 0 – 984 rpm Medium range: 918 – 2,456 rpm High range: 2,404 – 6,000 rpm Bodpfjz Tugbex Anpslp 5. Axis drives and axis feeds Axis drive motors: Manufacturer Siemens (digital AC drives) Rapid traverse max. (X/Y/Z axis): 15,000 mm/min Working feed max. (X/Y/Z axis): 12,000 mm/min Feed force max. (X/Y/Z axis): 24,000 N Measuring system: Linear measuring system “Heidenhain” (0.001 mm) in all axes Machine weight: approx. 17,000 kg Connection power: approx. 54 kVA Materials: Machine bed, work table, machine frame and vertical slide made of lamellar graphite cast iron GG30; milling slide made of nodular graphite cast iron GJS-600 Guide rails: Hardened and ground with Turcite B sliding strip coating (in X/Y/Z) Hydraulic system: Manufacturer Rexroth (including hydraulic weight compensation in the vertical axis) Lubrication & cooling: Automatic central lubrication of axes/ball screws, control cabinet with lighting and air conditioning unit Additional control: Portable electronic handwheel “Heidenhain HR-410” with axis selection, additional electric foot pedal for manual tool change Enclosure & Safety: 4-sided splash guard enclosure with large sliding doors, safety switches (CE compliant) and safety fencing for the rear.

Condition: good (used), Year of construction: 1998, Ref. -No.: 10583 Manufacturer: MTE Type: BF 4200 Year of construction: 1998 Type of control: CNC-Steuerung Control: Heidenhain TNC 426 Storage location: Halberstadt Country of origin: Germany X-Travel: 4000 mm Y-Travel: 1200 mm Z-Travel: 1500 mm Turning Speeds: 2.500 RPM Rapid Traverse X/Y/Z: 400 m / min Table surface area (LxW): 4200 x 1000 mm Tool changer: 40 Table load max.: 13.000 kg Tool Taper: SK 50 Weight: 20 t Number Of T-Slots: 7 Pcs Width of the T-slots: 22 mm Distance between the grooves: 140 mm Further information: - Heidenhain HR410 handwheel - 3D scanner, infrared - The ball screw on axes Z and Y runs clamped and supported on combined radial/axial roller bearings and radial ball bearings with 250 N/sqm stiffness. Blsdpfx Aj Ahkwionpep The machine can be viewed while powered up.

Condition: used, Year of construction: 1999, with CNC control, manufacturer: FIDIA, type: M 2, travel distances: X-axis: 4000 mm, Y-axis: 1000 mm, Z-axis: 1700 mm, with automatic tool changer with 10 tool positions, 2 pcs. clamping angles, manufacturer: MECOF, with 2nd exchangeable spindle HSK 50. Bledpfxe Af Nluj Anpop

Condition: excellent (used), Year of construction: 2001, travel distance X-axis: 4,700 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 3,000 rpm, table width: 1,000 mm, table length: 5,000 mm, total height: 3,700 mm, total width: 4,500 mm, total length: 9,000 mm, workpiece weight (max.): 10,000 kg, spindle motor power: 37,000 W, CNC Bed-Type Milling Machine ZAYER - 30KFU5000 MACH-ID 9885 Make: ZAYER Type: 30KFU5000 Control: SIEMENS 840D YOP: 2001 The Zayer 30 KFU 5000 is a heavy-duty CNC bed-type milling machine manufactured in Spain. It is designed for precision machining of large, heavy and complex workpieces. With its powerful milling spindle and automatic milling head, this machine offers excellent flexibility for machining large components from multiple angles. Heavy machinery manufacturers – Machining large machine frames, bases and structural components. Steel fabrication companies – Milling, drilling and finishing large welded steel constructions. Energy and power generation – Manufacturing components for turbines, generators and industrial equipment. Oil gas industry – Machining large flanges, valve bodies and pressure equipment components. Mould and die manufacturers – Precision machining of large moulds, dies and tooling. General subcontract machining companies – Producing large, complex components in small and medium production batches. Main advantages The Zayer 30 KFU 5000 combines heavy-duty cutting capacity, excellent rigidity and versatile machining possibilities. Its automatic milling head allows horizontal, vertical and angular machining, reducing the need to reposition large workpieces. An excellent machine for companies looking for a reliable, powerful and versatile CNC milling solution for large-scale precision machining. Chain ATC 30 Positions Chip conveyor Bledj Agu Tqepfx Anpjp Controller Siemens 840D Coolant system filtration X-Axis: 4700mm Y-Axis: 1250mm Z-Axis: 1500mm Table Length: 5000mm Table Width: 1000mm Table load: 10000 Power on spindle: 37kW Spindle speeds: 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 15000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 15000mm/min. Millinghead auto-index:2.5 x 2.5° Length: 9000mm Width: 4500mm Height: 3700mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1999, functionality: fully functional, x-travel 4000 mm y-travel 1000 mm z-travel 1500 mm Control Heidenhain 355 weight max. 10 t ja Bsdpfoxzuz Njx Anpelp more pictures available

Condition: ready for operation (used), Year of construction: 2010, Immediately available ex location: CNC bed milling machine Wagner Type WBE 1300 R Year of manufacture: 2010 Siemens Sinumerik 810 D Table 1500 x 400 mm Travel X/Y/Z: 1300/500/570 mm SK 40 Automatic tool clamping Drive power 12/9 kW Bljdpfx As Aa Imyjnpjp Spindle speeds 60 – 8,000 rpm Electronic handwheel Ball screw Vice Various tool holders Weight 4 t Price: EUR 5,500 plus VAT ex location

Condition: used, Year of construction: 1971, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Work area Swinging diameter: 520 mm Swinging diameter over cross slide: 400 mm Swinging diameter in the chuck: 1,000 mm Turning length: 1,250 mm Spindle Bljdpfoz S Euaox Anpep Spindle speed range: 11.2–1,120 rpm Performance data Total power consumption: 7 kW Machine weight: approx. 3.8 t Dimensions Space requirement: approx. 2.7 × 1.7 × 1.7 m EQUIPMENT 4-position tool holder with quick-change inserts Digital display

Condition: good (used), Year of construction: 1998, functionality: fully functional, Well-maintained CNC bed-type milling machine, subject to regular maintenance and servicing by a specialist company. The machine can be inspected under power and in operation (cutting). CNC Control: Heidenhain TNC 426 (6-axis) [Travel Ranges] X-axis: 1.704 mm (longitudinal) Y-axis: 1.210 mm (transverse) Z-axis: 1.003 mm (vertical) Spindle speeds: 35 – 3.000 rpm Number of gear stages: 2 Tool taper: SK 50 Main motor power: 28 kW Feed rates: 6 – 5.000 mm/min Rapid traverse: 15.000 mm/min Table clamping surface: 2.000 x 800 mm Table load capacity: 6.000 kg [Tool Changer] Max. tool diameter: 125/250 mm Max. tool length: 300 mm Max. tool weight: 25 kg Bjdpfx Ano Af Uycspjlp Total power consumption: 65 kVA Machine weight: 16.000 kg Equipment: Automatic, infinitely variable 2-axis universal milling head NC rotary table (dividing head) with tailstock 30-station tool changer Chip conveyor Coolant system with internal coolant supply (ICS) Electronic handwheel 3D touch probe Machine enclosure Operating manual Machine without clamping units, tools and holder.

Condition: used, Year of construction: 1988, Bed milling machine Manufacturer: Correa Bedpfezt U T Aex Anpelp Type: A16 Year of manufacture: 1988 Control: HEIDENHAIN TNC415 Travel distances X/Y/Z: 1,800 x 800 x 800 mm Clamping area: 2,000 x 630 mm Workpiece weight: 3,000 kg Operating hours: 12,103 Power: 19 kW Spindle type: ISO 50 Dimensions L/W/H: 4,886 x 2,720 x 2,500 mm Machine weight: 7,500 kg 31126

Condition: used, Hurco TM6i, 2 Axis CNC Lathe, Year 2013, Tailstock, Collet Chuck, Swarf Conveyor, Air Bench Filtermist, Hydrafeed MSV 65 Bar Feed Unit, with 3 Jaw Chuck Hurco TM6i CNC turning centre with slant bed design. Compact and reliable CNC lathe suitable for precision machining, subcontract engineering and production work. The Hurco TM6i CNC Turning Centre is a compact slant bed CNC lathe designed for precision machining and efficient production of turned components. Suitable for subcontract engineering, toolroom and general manufacturing applications, the machine offers a practical solution for a wide range of turning requirements. Bodpfxo Aggphs Anpjlp Manufactured by Hurco, a respected builder of CNC machine tools, the TM6i is designed to provide reliable performance, machining accuracy and operator-friendly operation. Its rigid construction and compact footprint make it well suited to both production environments and smaller engineering workshops. The machine is capable of producing a wide variety of precision components and represents an excellent opportunity to acquire a quality CNC turning centre from a recognised manufacturer. Available for inspection at our Prestwick, Ayrshire facility. Specifications: Swing: 15.94" Machining Length: 13.4" Chuck Size: 6.65" Bar Capacity: 1.75" Power: 17.5 hp Max RPM: 6,000 RPM Turning Dia: 12.4"

Condition: used, functionality: fully functional, Year of construction: 2011, load capacity: 450 kg, lifting height: 9,900 mm, empty load weight: 2,300 kg, fuel type: electric, tire condition: 70 %, drive condition: 75 %, maximum load weight: 454 kg, Self-propelled scissor lift SKYJACK SJ III 4632 11.7 m working core. 317kg thr personal lift SKYJACK SJ III 4632 scissor lift for sale in excellent condition personal lift, work stand with extendable platform. Manufacturer: Skyjack year of manufacture: 2011 load capacity: 454 kg Working height: 11.7 m Raised platform height: 9.7m Total width: 1.9 m Total length: 2.3 m Gross weight: 2300 kg Bjdpfeugtliex Anpjlp non-marking tires operating hours: 374 TROJAN MOTIVE batteries in good condition. built-in battery charger

Condition: used, Year of construction: 2017, operating hours: 21,000 h, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, spindle speed (max.): 15,000 rpm, spindle speed (min.): 20 rpm, table width: 1,100 mm, table load: 1,200 kg, table length: 3,200 mm, CNC Bed Milling Machine Manufacturer: DMG MORI Model: DMF 260-11 linear Year of manufacture: 2017 Control: Celos with Siemens 840D sl Operate Main spindle renewed Technical specifications: Travel distances: - X-axis travel: 2,600 mm - Y-axis travel: 1,100 mm - Z-axis travel: 900 mm Main spindle: - Speed range: 20 - 15,000 rpm - Drive power (40/100%): 46 / 30 kW - Torque (40/100%): 200 / 130 Nm Blsdpfx Ano Agr A Uspep - Tool holder: SK 40 Worktable: - Fixed table with integrated rotary table - Clamping surface: 3,200 x 1,100 mm - Rotary table diameter: 1,050 mm - Max. table load: 1,200 kg Tool changer: - Number of tool stations: 60 positions - Chip-to-chip time: 7.5 s - Power-on hours: approx. 21,000 h - Operating hours: approx. 9,200 h Technical features: - ICS (internal coolant supply) 40 bar - Coolant spray gun - Rotating viewing window - Tropical package - Dynamic package Accessories: - Paper band filter 600l - Chip conveyor - Heidenhain TS 649 DMG touch probe - 3D quickSET - 2x Oil and emulsion mist separators - 4-color signal lamp - Electronic handwheel Accessories, pictured tools, and clamping devices are only included in the scope of delivery if noted in the additional information.

Condition: ready for operation (used), Year of construction: 1978, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 2,066 rpm, table width: 1,000 mm, table length: 6,100 mm, overall weight: 19,000 kg, 3-axis Newall display with variable feed rate 50-speed head with continuously variable spindle speeds, max. 1,500 rpm 6100 x 1,000 mm table 4500 x 1,000 x 1,000 mm stroke Bedpfx Anovz Aydopjlp 19-ton weight

Condition: used, Year of construction: 1986, longitudinal travel 1200 mm vertical movement 600 mm cross travel 450 mm table-size 1500 x 600 mm max. table load 2 t spindle taper ISO 50 spindle drive 15 kW speeds 6 - 4000 U/min feeds 2 - 2500 mm/min rapid traverse 10 m/min Bledpoxukppjfx Anpjp voltage 400 V Bed milling machine with swivable spindle to horizontal or vertical. Control: Heidenhain TNC 155. Machine has an additional horizontal 4th axe.

Condition: like new (used), Year of construction: 2018, operating hours: 500 h, functionality: fully functional, LAGUN BM4RT Bed Milling Machine Manufacturer: Lagun Type: BM4RT Year of manufacture: 2018 Condition: operational, used, like new Operating hours: 1650 h Spindle hours: 438 h Control system: Heidenhain iTNC 640 Video available. Further information upon request. Blodpfszmpydex Anpjp

Condition: used, Year of construction: 2008, functionality: fully functional, Travel ranges: X 3,500 mm Y 1,250 mm Z 1,000 mm Control system: Heidenhain iTNC 530 Blsdpfoz R Su Eox Anpsp Milling head: Automatically pivoting diagonal milling head with 2.5° x 2.5° indexing Spindle speed 3,000 rpm, tool holder SK50 Internal coolant supply 3 chip conveyors (2 longitudinal, 1 transverse) Four-sided splash guard enclosure in an enhanced special design

Condition: used, Year of construction: 2007, functionality: fully functional, Travel ranges: X 7,500 mm Y 1,400 mm Z 1,000 mm Control system: Heidenhain iTNC 530 Milling head: Automatically pivoting diagonal milling head with 2.5° x 2.5° indexing Speed 4,000 rpm, tool holder SK50 Platen table 8,000 x 1,500 mm Mounted NC rotary table 1,000 x 1,000 mm Internal coolant supply Tool changer with 40 positions Blsdpfx Aoz R Surenpep Chip conveyor in the X-axis direction 3-sided splash guard enclosure

Condition: used, Year of construction: 2000, travel distance X-axis: 9,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, table width: 1,200 mm, table length: 9,500 mm, total height: 4,025 mm, total width: 6,470 mm, total length: 18,830 mm, workpiece weight (max.): 47,500 kg, overall weight: 61,620 kg, CME FCM 9000 - Bed Milling Machine 5-axis Technical details: Table size 9500 x 1200 mm. Movement x-Axis 9000 mm. y-Axis 1500 mm. z-Axis 1500 mm. Max table load 5000 kg/mtr Swiveling of vertical milling head 1°x1º CNC Control Heidenhain TNC 430 CB Bledpfx Ae Aaww Ionpop If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 1981, travel distance X-axis: 1,650 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, table load: 4,000 kg, overall weight: 8,000 kg, 3-axis CNC machine Table: 2000 x 700 mm Travel: 1650 x 1000 x 1000 mm Bedpfx Ano Abbhtopolp Spindle: SA 40 External electrical cabinet Maximum spindle speed: 2066 rpm Weight: 8000 kg