Used Workbench Vise for sale (995)

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, total height: 2,930 mm, total width: 2,210 mm, table width: 560 mm, table length: 1,000 mm, overall weight: 7,000 kg, spindle speed (max.): 16,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, product length (max.): 2,700 mm, number of axes: 3, This 3-axis HERMLE C800V vertical machining centre was manufactured in 2000. It features a travel range of 800 mm in the X-axis, 600 mm in the Y-axis, and 500 mm in the Z-axis. The machine includes a 30-position tool changer and a spindle speed range of 16,000 rpm. If you are looking to get high-quality machining capabilities, consider the HERMLE C800V machine we have for sale. Contact us for further details. Bsdpfxez D Tdxe Anpoww - Power (40% / 100% Duty Cycle): 15 kW / 10 kW- Rapid Traverse (X, Y, Z): 35 m/min- Coolant System: 300 L – 40 L/min at 3 bar- Operation Voltage: 400 V / 3~ 50 Hz- Control Voltage: 24 V-- Total Nominal Current: 44 A- Total Rating: 31 kVA- Electrical Drawing No.: 300.91 K 40.1- Control Unit Operating Hours: 57,705 hrs- Machine Operating Hours: 48,735 hrs- Program Run Time: 19,077 hrs- Spindle Operating Hours: 18,005 hrs- Drive On: 30,073 hrs- Axes in Motion: 17,617 hrs- Included Equipment / Accessories:- Heidenhain TS 642 touch probe system (retrofitted in 2023)- 3 Allmatic vises- Approx. 300 tool holders- 3 jaw chucks- Miscellaneous small parts- Complete machine documentation and service reports- Service History:- 2019: New main spindle fitted- 2023: Retrofitted with Heidenhain TS 642 touch probe system Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2012, overall weight: 55 kg, total height: 120 mm, total length: 490 mm, total width: 125 mm, Metal cutting Tooling GRESSEL - Duogrip 125mm MACH-ID 9710 Make: GRESSEL Type: Duogrip 125mm Year: 2012 Length:490mm Width:125mm Height:120mm Bodpfoz Arigsx Anpsww Weight:55kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2013, Milling machines Travel distance X: 600 mm Travel distance Y :500 mm Travel distance Z: 540 mm Number of axis: 3 milling machine / machining center Control: Heidenhain iTNC 530 spindle chuck: SK40 spindle revolutions: 14000 rpm Speed range to: 14000 U/min tool changer: 24 - time Bwjdpfx Ans Adz Hnspsw spindle cooling chip conveyor control Heidenhain - DXF file import - Electronic handwheel - Through-spindle coolant (IKZ) - Belt filter - Air cooling through the spindle - Spindle spray ring - Direct measuring system / linear scales - Renishaw laser tool measurement - Renishaw OMP40 3D touch probe - Documentation / manual - Very good condition - Without the vises shown in the pictures

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 49149, operating hours of spindle: 39,072 h, number of slots in tool magazine: 280, Equipment: chip conveyor, For sale is an extremely robust and reliable horizontal 4-axis machining center, Heller MCH 250, manufactured in 2008. The machine is designed for high-precision heavy-duty machining and is in operational condition. Equipment: - Horizontal spindle - 2-position pallet changer - Rotary table - Additional 4-position rotating pallet changer (Keppeler, SN: M4.4914900) - Siemens 840D control - 280-position tool changer - Chip conveyor Knoll 330S-1/150 - Coolant/lubricant treatment system with band filter, Siemens Simatic control Bwedpfx As Afxw Henpow - Cooling unit BKW Accessories: - Workbench (4 drawers, 1 door) - Swivel chair - Shelf - PC, mouse, keyboard, monitors Attractive offer – flexible and worry-free We offer not only a high-quality product but also customized financing options that adapt to your needs. Whether it's a down payment, installment payments, or individual financing models – together, we will find the right solution. If desired, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so that you don't have to worry about anything. 📞 Please contact us for more information or a non-binding offer. We will provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 18378, operating hours of spindle: 30,620 h, For sale is a highly precise and dynamic 5-axis CNC universal machining center from the reputable manufacturer DECKEL MAHO, model DMU 80 P hi-dyn, manufactured in the year 2000. This machine comes from the proven "hi-dyn" series (High Dynamics), which is characterized by extremely fast rapid traverse speeds, high acceleration values, and a robust portal design. It is ideally suited for highly precise 5-sided and 5-axis simultaneous machining in demanding tool, mold, and prototype construction. The machine is in operational condition and impresses with the combination of large travel ranges, an NC swivel rotary table, and stable machine kinematics. Equipment: - Rotary table - mounted special clamping device - 2 precision vises - viewing window - Heidenhain TNC426 control unit - 60-position tool changer SK40 - chip conveyor - separate coolant system with band filter Attractive offer – flexible & worry-free We offer you not only a high-quality product but also customized financing options that adapt to your needs. Whether it's a down payment, installment payments, or individual financing models – together we will find the right solution. On request, we can also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don't have to worry about anything. 📞 Please contact us for further information or a non-binding offer. We will provide you with personal and competent advice. Bwjde Afphiepfx Anpow Subject to prior sale, changes, and errors!

Condition: ready for operation (used), Year of construction: 2003, operating hours: 13,500 h, functionality: fully functional, travel distance X-axis: 1,440 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: 530, spindle speed (max.): 12,000 rpm, operating hours of spindle: 12,800 h, coolant supply: 40 bar, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Machine with a wide range of accessories. Vise and holder included. Bwodpo Afzdaofx Anpow

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 35 kg, arm reach: 1,831 mm, controller manufacturer: FANUC, controller model: R-30iB Plus (A-Cabinet), teach pendant manufacturer: FANUC, teach pendant model: iPendant Touch, type of input current: three-phase, repeat accuracy: 0.03 mm, warranty duration: 24 months, Equipment: documentation/manual, Basic information: Teximp Universal Robot Cell is an all inclusive robotic automation solution for your CNC machine. The URC-35P is based on Fanuc M-20iD/35 robot arm adapted for handling pallets or vises. It consists of: 1) Robot: Fanuc robot M20iD/35 6-axis vertical robot Load capacity 35 kg / reach 1831mm R-30iB Plus controller A-cabinet I/O modules; DI32 / DO32 DCS Dual Check Safety Position (J567) Soft Float (J612) Touch Skip (J921) Singularity Avoidance (R792) User Socket Messaging (R648) Karel (R632) 2) Loader Table: Compact but heavy loader table with front entrance. Table size: 980 x 700 mm Docking station with four pockets Three locating pins for quick pallet exchange ReeR safety light curtain, Cat. 4 Three control buttons LED status beacon Electrical cabinet and cables included 3) Pallet Rack The URC-35 Palletizing cell can be equipped with 1 or 2 large-capacity racks with 42 pockets. Large rack (42 pockets) - included as standard Second large rack (42 pockets) - optional 4) Vices & Zero-point clamping system The system is designed for: - Lang Vices (not included in price) - Lang Zero-Point clamping system (not included in price) - Note: it can also be implemented to work with pallets instead of vices (not included in price) 5) Safety Options: Cage (standard) ReeR safety light curtains (cat.4) on Loader table (standard) Plexiglass cover on Racks (standard) ReeR Mosaic M1 safety controller (standard) 6) Interface to the Haas machines Teximp Robot Interface includes all needed to connect the URC to any Haas machine. Support Haas Mill and Lathe machines, with NGC and CHC control. (If your machine is not Haas, we can adjust robot-machine interface. Note: this will be additionally charged) Communication CNC < = > URC (I/O, safety, program call -> all via Ethernet cable communication) Preparing for a Clamping device Preparing for a PAD Preparing for an external Air Blow 7) Gripper Configuration The Teximp Gripper Interface includes everything needed for gripping the vices Gripper carrier Schunk Gripper JGP-P 160-2 Stroke per jaw [mm] = 8 Recommended workpiece weight [kg] = 24.5 Preparation for vice/pallet clamping Sensors for gripper state detection - clamped/unclamped Blower nozzle Laser sensor (for vise presence detection) 8) Automatic Door system URC-35 Palletizing can be equipped with a pneumatic auto door (PAD) for selected Haas machines. Available PAD models include: a) PAD-HaasUMC-side b) PAD-HaasVF-side c) Can be made for other machines (not included in price) Bjdpfx Ao Af Uxxjnpeww 9) Programming Option (HMI) Enables intuitive interaction with Teximp robotic systems through a visual interface, facilitating configuration, monitoring, and optimization of operations. It allows operators to program quickly and easily, without the need for Fanuc programming knowledge. Important Note: Operators can easily assign different .nc machining program to each Vise via HMI, robot calls assigned program on CNC machine by scanning QR code on each vise! - Easy visual programming - No additional hardware required Note: - We provide transport, installation, commissioning and operator training at additional cost. - You will have our full support during the ramp-up phase of the robotic cell, as well as for all other needs and requirements regarding our system.

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 27 mm saw band length: 2910 mm saw band width: 0,9 mm span width: 320 mm dimensions of saw-band: 2910 x 27 x 0,9 mm band speed: 20 - 120 m/min electrical connection: 400/50/60 V / Hz. total power requirement: 1,5 kW machine weight approx.: 390 kg dimension machine approx.LxWxH: 1480 x 1700 x 2000 m Bwodpfx Ansy E Hynspjw Fully hydraulic lowering and lifting function of the saw frame Hydraulic opening and closing of the vise Automatic shut-off after completion of cut, return of the saw arm to starting position Torsion-resistant saw frame made of cast steel (multiple ribbed) Hydraulic short-stroke cylinder for vise Precisely ground carbide saw blade guides, adjustable Electric coolant pump Manual band tension with display, including electrical monitoring of saw band and cutting pressure Hydraulic vise (opening and closing) Chip removal brush, running synchronously Large, solid round support table, rotates during miter cuts with predefined cutting channel; miter adjustment manual, readable via scale Material stop 500 mm with scale Incl. saw blade with combi toothing 4/6 Roller conveyor sections: 2 pieces of 3 m and 1 piece of 2.55 m. *

Condition: excellent (used), Year of construction: 2004, 1 used, very well-maintained fully hydraulic circular cold saw automatic with flat vertical guides Bwsdpsy E Uk Iofx Anpjw Max. saw blade diameter: 325 mm Cutting capacity at 90°: - Round: 100 mm - Square: 85 x 85 mm - Rectangle, flat: 165 x 85 mm Infinitely variable speed range: 20 - 100 rpm Max. saw blade dimensions: 325 x 3.0 x 40 mm Single stroke feed: up to max. 550 mm Multiple stroke feed: for lengths over 550 mm Working height: 930 mm Drive power: 3 kW / 400 V Machine dimensions (L x W x H): 2150 x 1450 x 1950 mm Weight: approx. 650 kg Accessories / Special Features: • Fully hydraulic design • Fully automatic operation, single cuts also possible • Vise feed • 90° cutting angle • Infinitely variable speed range 20 - 100 rpm • Length setting via programming on the control panel • Cutting speed and feed can be continuously adjusted on the control panel during operation • Single and multiple stroke feed • Adjustable flat vertical guides • Coolant system • Micro-spray system • 1 used saw blade included • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Allmatic-NC LC 160/200 Machine Vice Stage 1 = 15 kN Stage 2 = 30 kN Stage 3 = 45 kN Stage 4 = 60 kN Pressure sensor is not included in the scope of delivery! You are welcome to come by for an inspection. We can also organize an affordable shipping service for you! You will receive a proper invoice. A net invoice can also be issued for foreign customers, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our shop and take a look at our other offers as well. All specified company names and trademarks are the property of their respective owners and are used solely for identification and product description purposes. Deviations from technical data and errors in the item description are possible and reserved. Bwodpfx Anoyilc Sepow

Condition: good (used), Machine vice base plate, clamping plate, vise plate, rotary table Bwodpfeykzhvox Anpow -Rotary table: Turntable for vise -T- Round groove: 20 mm, dimensions see photos -Degree display -Dimensions: 350/320/H45 mm -Weight: 20 kg

Condition: new, range L-W-H 1830x510x1860 mm weight 195 kg 15 St. Bjdpfx Aneu Imfhjpsww weight max. in kg 700 kg Professional workbench / tool trolley Dimensions of the right 3 upper drawers 41.5 x 39 x 8 cm. Dimensions of the right 4th drawer 41.5 x 39 x 15 cm. Dimensions of the right 5th drawer 41.5 x 39 x 23 cm. Dimensions of the middle 3 upper drawers 83.5 x 39 x 8 cm. Dimensions of the middle 4th drawer 83.5 x 39 x 15 cm. Dimensions of the middle 5th drawer 83.5 x 39 x 23 cm. Dimensions of the left 3 upper drawers 41.5 x 39 x 8 cm. Dimensions of the left 4th drawer 41.5 x 39 x 15 cm. Dimensions of the left 5th drawer 41.5 x 39 x 23 cm. Dimensions of the back wall 183 x 46 cm. Dimensions of the closets 183 x 30 x 46 cm. Dimensions of the shelf 22.5 x 63 cm. Wheel diameter 150 mm. Maximum capacity of the wheels 175 kg. Per bike. (700 kg total) Maximum capacity per tray 30 kg. Dead weight 195 kg. Overall dimensions 198 x 51 x 186 cm. Packaging dimensions 190 x 60 x 95 cm. Equipped with 4 high-performance steering wheels, 2 of them with brakes. All drawers are equipped with non-slip mats. The open compartment and the drawers can be locked separately. Solid wood worktop 4 cm thick. Solid pullouts with ball bearings (double bearings)

Condition: used, Technical details: travel -y axis: Schlitten auf Balken: 200 mm spindle taper ISO: SK 40 spindle head swivable left - right: je 90° ° quill stroke: 80 mm turning speed range: 90 - 900 / 5 step U/min distance table - lower edge spindle: min./max.: 50 / 400 mm table surface area: Anbaufläche:760 x 200 mm table surface area: Spannfläche: 630 x 200 mm max. table load: 100 kg x-travel: Tisch längs: 320 mm z-travel: Tisch vertical 350 mm table swivelabel +/-: re/li je 30° distance table - lower edge spindle: min./max.: 50 / 400 mm feed:: Tisch: stufenlos 14 - 71 mm/min total power requirement: 4,0 kW weight approx.: 1.200 kg dimension machine xH: 1,3 x 1,5 x 1,8 m Equipped with Heidenhain DRO for X and Y travel Swiveling work spindle The feed works via variator gear. The table is swivelable. Spindle speeds operate in 3 levels via gears and in 2 levels electrically. Bedpsu Ndb Ajfx Anpeww Cooling device diverse tool holders SK40 Der Fräsbalken ist um ca. 350mm ausfahrbar. The machine vise is not included in the delivery scope (see picture), but can be purchased additional! *

Condition: used, Machine vice, clamping claws, clamping jaws, stable clamping jaw, stable clamping jaw, pull-down clamp -Manufacturer: WILA, stable clamping jaw height adjustable -Clamping jaw: 120 x 45 mm -Clamping height: 85 - 105 mm -Groove width: 28 mm Bjdpfx Asu N Sh Djnpoww -Dimensions: 240/120/H90 mm -Weight: 10.6 kg

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 15,000 rpm, total height: 2,720 mm, total width: 2,630 mm, overall weight: 10,000 kg, table width: 630 mm, table length: 500 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, product length (max.): 4,500 mm, table load: 600 kg, number of slots in tool magazine: 60, swivel angle B-axis (max.): 180 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis DECKEL MAHO DMC 60U was manufactured in 2004. It features a spindle speed of 12,000 rpm and a tool magazine with 60 positions, enhancing its versatility for various machining tasks. The Y-axis was replaced in 2023, ensuring improved performance. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 60U universal machining centre we have for sale. Contact us for further details. • Spindle taper: SK40 (replacement spindle, max ~2,500 operating hours) • Y-axis replaced in 2023 • Kinematics measured and within specification • Tool magazine: 60 stations • On-machine 3D probe: Hexagon • Year of manufacture: 2004 Additional equipment • Tooling, chuck, vises (details to follow; see attached PDF and Excel) • No robots/automation/chip conveyor/bar feeder information provided in the text above Technical Specification Taper Size SK 40 Bwsdpjzcqlusfx Anpsw Through-spindle Coolant Yes

Condition: used, mileage: 63,512 km, power: 120 kW (163.15 HP), first registration: 08/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 5,932 mm, total width: 2,020 mm, total height: 2,785 mm, loading space volume: 13 m³, loading space length: 3,509 mm, loading space width: 1,774 mm, loading space height: 1,978 mm, Year of construction: 2021, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), parking heater, soot filter, - Internal No. 88.65 - Dimensions, passenger/cargo area: Length to driver's seat 3,507 mm x Length to partition 2,214 mm x Width 1,772 mm x Height 1,977 mm - Sortimo workshop van equipment, left-right and front, including vise; surcharge 1,000 EUR - Switchable all-wheel drive - Transmission: 7G-TRONIC PLUS automatic - Regulated Tempmatic air conditioning - MBUX multimedia system with 7-inch touchscreen, Apple CarPlay and/or Android Auto, and Bluetooth hands-free system - Package: Parking package with reversing camera - Trailer hitch - 13-pin trailer socket - Crossbars with step - Spare wheel holder with jack - Wheels: Hydraulic jack - Rear double door with side opening - Seats: 3-seater bench, 1st row - Armrest, driver and passenger door - Comfort passenger seat - Comfort driver's seat - Comfort headrest, driver - Seat: Lumbar support, passenger seat, electric - Seat: Lumbar support, driver seat, electric - Seats: Pre-wiring for seat configuration 3/-/ - Partition extending to the C-pillar - Rain sensor - Wooden floor in the passenger/cargo area - Radio: Digital radio DAB - Rails for roof rack - WET WIPER SYSTEM - Standard load area up to the railing - Pre-wiring for electrical system, parameter-specific special module - Auxiliary heater (hot water), programmable and with remote control - Radio remote control for auxiliary heater - Mis-fueling protection - Window, front left, in cargo area sliding door - Window, front right, in cargo area sliding door - Tires: M + S - Spare wheel - Rear mud flaps - Front mud flaps - Wheel arch trim - Roof height in conjunction with partition - Generator 14 V/180 A - All-weather floor mats - Roof lining - Airbag, passenger side - Pre-wiring for intelligent tachograph EU Bjdoy T Agaspfx Anpjww - Heated windshield with band filter on front screen - Thermal insulation, driver's compartment - Thermal insulation, cargo compartment - Main tank 93 liters - Exterior mirrors, electrically foldable - Exterior mirrors without turn signal indicators - Battery: AGM battery 12 V / 92 Ah - Tachograph operation at the front, under the headliner - Turn signal lights, side, front - Cupholder - Storage compartments: Cupholder, front - Chassis number: W1V9076331P379962 1st owner, accident-free, not a re-import (German vehicle), not a rental car, top condition, non-smoking vehicle, original service booklet maintained, trade-in of old vehicle possible, workshop checked including warranty, DEKRA used car condition report available upon request. We can gladly deliver the vehicle, purchased locally, to your home address at a price of 0.50 EUR/km. The minimum cost is 150.00 EUR.

Condition: used, mileage: 63,512 km, power: 120 kW (163.15 HP), first registration: 08/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 5,932 mm, total width: 2,020 mm, total height: 2,785 mm, loading space volume: 13 m³, loading space length: 3,509 mm, loading space width: 1,774 mm, loading space height: 1,978 mm, Year of construction: 2021, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), parking heater, soot filter, - Internal No. 88.65 - Dimensions, passenger/cargo compartment: Length to driver's seat 3,507 mm x Length to partition 2,214 mm x Width 1,772 mm x Height 1,977 mm - Sortimo workshop van equipment, left/right and front, including vise, surcharge €1,000 - Switchable all-wheel drive - Transmission: 7G-TRONIC PLUS automatic - Tempmatic controlled air conditioning - MBUX multimedia system with 7-inch touchscreen, Apple CarPlay or Android Auto, and Bluetooth hands-free system - Package: Parking package with reversing camera - Trailer hitch - 13-pin trailer socket - Roof rack with step - Spare wheel holder with jack - Wheels: hydraulic jack - Rear double door with side opening - Seats: 3-seater bench in the first row - Armrest, driver's and passenger door - Comfort passenger seat - Comfort driver's seat - Comfort headrest, driver - Seat: Lumbar support, passenger seat electric - Seat: Lumbar support, driver seat electric - Seats: Pre-wiring for seat configuration 3/-/ - Partition extending to the C-pillar - Rain sensor - Wooden floor in the passenger/cargo compartment - Radio: Digital radio DAB - Rails for roof rack - WET WIPER SYSTEM - Reduced cargo area up to the safety bar, standard - Pre-wiring for electrical system, parameterized special module - Auxiliary heater (hot water), programmable and with remote control - Radio remote control for auxiliary heater - Anti-mis-fueling protection - Window, front left in the cargo sliding door - Window, front right in the cargo sliding door - Tires: M + S - Spare wheel - Mud flaps, rear - Mud flaps, front - Wheel arch covers - Roof height in conjunction with partition - Generator 14 V/180 A - All-weather floor mats - Roof lining - Airbag, passenger side - Pre-wiring for intelligent tachograph EU - Heat-absorbing glass with band filter in the front screen - Thermal insulation, driver's cab - Thermal insulation, cargo compartment - Main tank 93 liters - Electrically foldable exterior mirrors - Exterior mirrors without turn signal indicators - Battery: AGM battery 12 V / 92 Ah - Tachograph operation at the front under the headliner - Side turn signal lights at the front Bwjdpfjy T Agtjx Anpjw - Cup holders - Storage compartments: Cup holders at the front - Chassis number: W1V9076331P379962 1st owner, accident-free, not a re-import (German vehicle), not a rental car, top condition, non-smoking vehicle, original service booklet, trade-in of old vehicle possible, workshop-checked including warranty, DEKRA used car condition report available upon request. We can gladly deliver the vehicle, purchased locally, to your home address for a price of €0.50/km. The minimum cost is €150.00.

Condition: new, Year of construction: 2026, Threading unit OLED display LED lighting Continuous/normal drilling capacity (mm) - R1 30/35 mm - R2 27/32 mm Maximum threading capacity - R1 M30x3.5 - R2 M24x3 Spindle MK IV Drilling depth (mm) 160 Overhang (mm) 300 Column diameter (mm) 140 Usable table surface (W x D) (mm) 590 x 450 Speed display, digital Drilling depth display, digital Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table (mm) 150-700 Machine dimensions without control panel (mm) 610 x 900 x 1,980 mm Machine dimensions Bwedpfed Su Agsx Anpew with control panel (mm) 670 x 1,100 x 2,200 mm Motor, three-phase, 400V with frequency converter (kW) 4.0 Spindle speeds, infinitely variable R1 (1-stage) 0-1000 1/min R2 (1-stage) 0-1600 1/min Manual feed Weight (kg) 400 Optional drilling package 6 (€ 910.00 plus VAT) - Vise [felix] 2.0 150 - Taper shank MK IV/B18 - Reducing sleeve MK IV/MK II - Reducing sleeve MK IV/MK III - Quick-change drill chuck B18 3-16 mm (accuracy 0.17 mm) Delivery in Germany, free of charge, including packaging! NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS – ASK FOR A QUOTE! FLOTT SUPPORT PARTNER

Condition: good (used), Machine vice, sturdy vice, drill press vice Bwedpfx Anjfldb Njpsw -Jaw width: 160 x 50 mm -Clamping depth: max. 110 mm -Dimensions: 460/160/H120 mm -Weight: 36 kg

Condition: new, Year of construction: 2026, Standard Equipment - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover - LED lighting - Quickly adjustable and ergonomic drill depth stop Bwjdofmh Tljpfx Anpow - Stepless speed control via rotary knob - Thermal overload protection - Spindle stop - Drill protection with electrical protection - Connection cable with CEE plug - Mechanical feed of the Z-axis - Incl. electromagnetic clutch for 3 feed speeds - Drilling cross with push button - In thread cutting mode: Right/Left TECHNICAL DATA Continuous/Normal drilling capacity (mm) R1 - 27/32 (in E335/ST60) (100) R2 - 25/30 (in E335/ST60) (70) R3 - 30/35 (in E335/ST60) (200) Thread cutting capacity max.: R1= M24x3, R2= M20x2.5, R3= M30x3.5 Spindle MK III Drilling depth: 125 mm Overhang: 300 mm Column diameter: 125 mm Usable table surface (W x D): 590 x 450 mm Speed display: digital Drilling depth display: digital Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table: 150-700 mm Spindle speeds stepless: R1 (1-stage) 0-1,000 rpm R2 (1-stage) 0-1,600 rpm R3 (2-stage with reduction gear) 0-4,000 rpm Optionally R1 or R2 without extra charge Extra charge for R3: € 1,700,- Accessories: Coolant system (€ 620,-) - Separate container - Filling volume: max. 15 l - Delivery rate max. 13.4 l/min Accessories: Drilling package 5 (€ 875,-) - Vise [felix] 2.0 150 - Taper shank MK III/B18 - Reducing sleeve MK III/MK I - Reducing sleeve MK III/MK II - Quick-change drill chuck B18 3-16 mm (Accuracy 0.17 mm) WARRANTY: 3 years (single-shift operation) DELIVERY: free to your door incl. packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Machine vice, sturdy vice, drill press vice -Jaw width: 215 x 40 mm -Clamping depth: max. 240 mm -Tension: centric -Dimensions: 460/280/H135 mm -Weight: 35 kg Bwedpfx Ajfxg Nfjnpjw

Condition: excellent (used), diverse vices as shown in attached pictures Bsdpfsfr T N Rex Anpoww

Condition: used, Machine vise, sturdy vise, drill vise -Jaw width: 260 mm Bsdefv Aqbopfx Anpsww -Back height: 50 mm -Clamping depth: 265 mm -Dimensions: 580/260/H135 mm -Weight: 56 kg

Condition: used, Machine vise, sturdy vise, drill vise Bwodpfefv Aquex Anpow -Jaw width: 250 mm -Back height: 50 mm -Clamping depth: 270 mm -Dimensions: 640/440/H220 mm -Weight: 79 kg

Condition: used, Machine vice, stable vice, drill vice -Back width: 110 x 30 mm -Tension depth: max 132 mm -Tension: centric Bwjdpfx Asd Aghajnpow -Dimensions: 345/135/H95 mm -Weight: 11.7 kg