Used Zimmer Galva 4 for sale (30,001)

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use. Lajdpfxshpktvs Agzjk

Condition: ready for operation (used), controller model: Haas, empty load weight: 12,000 kg, total length: 5,950 mm, total width: 3,048 mm, total height: 2,200 mm, swing diameter over cross slide: 2,000 mm, Grote doorlaat toolroom draaibank Draaibank met dubbele klauwplaat Spanenafvoerband Lsdpfx Ajwu Ipisgzoak CNC Hollow Spindle Slant Bed Oil Country Lathe Swing over bed: 1350 mm Swing over cross-slide: 400 mm Dia of spindle bore: 270 mm!! Power on the spindle: 55 HP Number of speeds: 1 > 500 rpm

Condition: used, Year of construction: 2016, Used machine Cross sanding machine Year of construction 2016 Product advantages Underneath perfectly lacquered, stained or oiled wood surfaces there is always a perfectly sanded surface! Felder sanding machines are characterized by solid construction, state-of-the-art machine technology and maximum productivity. The most important highlights at a glance: ? Sanding width 1350mm ? Sanding width 3-170mm ? Combined superfinishing unit ? Touch-screen control for work processes ? The Felder operating concept guarantees maximum process and work safety Your advantages at a glance: Time saving ? Motorized adjustment of the contact roller in the 1/100 mm range from the control panel ? Innovative unit arrangement for pre-sanding / fine sanding of veneered workpieces ? Brushing devices at the machine outlet ? Lacquer sanding against additional equipment ? comfort ? Fixed feed table height (machine head adjusts) ? Touch screen control with clear image display and program memory ? Machine data acquisition for sanding belt wear and much more. ? Tool-free handling when changing the sanding belt ? Large fold-down table extensions for the heaviest workpieces ? flexibility ? Units for calibration, fine sanding and lacquer sanding ? Variable feed speed up to 20 m/min by means of inverter Innovation ? Electronically segmented sanding pad with silicone technology for minimum air consumption ? Combined superfinishing unit incl. chevron sliding belt to compensate for oscillation marks ? quality ? Solid machine construction ? Durable machine components Basic equipment Control unit finish 1350 classic Control unit with 7" color touch screen 100 program memory locations Maintenance intervals Plain text error messages Ammeter for load monitoring Feed table fixed infeed height - fixed table, 900mm, electric height control of the units incl. fine adjustment from the control panel, V-speed infinitely variable from 2.8-20m/min. Adjustable via inverter from the control panel Manual protection and workpiece over-thickness protection Workpiece detection sensor with 25 sensors 55 mm segment width Endlessly manufactured belt conveyor with honeycomb structure Automatic feed carpet centering Cross sanding unit finish 1350C high gloss Segmented, electronic-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Chevron sliding belt between sanding pad Sanding belt for homogeneous sanding without oscillation marks Variable pressure control on the operating side Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection 1 motor with 7.5 kW (10 hp) Star-delta start-up Cleaning fan with time control Cutting speed 12 m/sec Sanding belt 140 x 4560 mm Combined superfinishing unit 1350C: Rubberized, grooved contact roller with 85-90° Shore hardness and 142 mm diameter Electromot. Position-controlled grit compensation segment, electro-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Lajdpfxew I Uv Uj Agzek Variable pressure control on the operating side Chevron sliding belt between sanding pad and sanding belt belt for homogeneous sanding without oscillation marks Mechanically pre-tensioned rubber pressure rollers Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection

Condition: excellent (used), Year of construction: 1995, still preserved CNC because little in use was used for door production , but can be used for any purpose . Double table, can be mounted from left and right side 4 axes x 5000 mm y 1350 mm z 450 mm a 190° main spindle SK 40 8 kw water cooled up to 17 000 rpm Ledpfxjig T Eps Agzeak chain magazine with 24 places

Condition: new, Year of construction: 2025, All stainless steel Tumbler Mixer - quick delivery of one machine Lajdpfx Agjif Upfezjk Manufactured new to order Stainless steel drum in high grade 316 stainless steel Variable speed drum from zero to 24 rpm Electric tipping discharge Capacity 50 Kg to 90 Kg according to product type 2 x Models

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Zimmer & Kreim handling system Chameleon with 360 slots For technical data see original order confirmation Lajdpfxjwypggo Agzek

Condition: new, cutting diameter 185 mm saw band length 2.085 x 20 x 0,90 mm table height 915 mm band speed 35/70 m/min capacity 90 degrees: round 185 mm capacity 90 degrees: square 150 mm capacity 90 degrees: flat 220 x 150 mm connected load frequency 400 V total power requirement 0,8 kW weight of the machine ca. 195 kg Laedpfehpktrex Agzsk dimensions of the machine ca. 550 x 1.280 x 1.740 mm mm Metal band saw with stepless electronic speed control and automatic lowering. • Selector switch for hydraulically controlled or manual band arm lowering • Saw arm can be swiveled up to 60 ° to the right • Quick-action vice • Belt guide with 8 ball bearings • Hydraulic saw band tension with tension pressure display and band break shutdown •Incl. Coolant system •Incl. Machine cabinet

Condition: new, GRATMAXX Bürstentgratmaschine The machine is suitable for the deburring of edges on: Round tubes, square tube, rectangular tube, full materials, profiles of all kinds. Materials: Steel non-ferrous metals, plastics, hard or soft. Work flow: After setting the workpiece support and dern side stops the Ridge-workpiece is easily kept on the brush rotating around its own axis, without rotating the workpiece, this movement is also the brush. Lasded Hmnfjpfx Agzek The workpiece material, the Ridge strength, as well as the desired rounding of the edges determine the pressure and the duration of contact seconds, usually around 1-5. Technical data: Material: Steel, stainless steel and non-ferrous metals (engine speeds 700-1,900 rpm, infinitely variable) Min. workpiece-Ø: 5 mm Maximum work piece-Ø: 100 mm (150 mm) Brush dimensions: 2 piece Ø300 (250) x 50 or 3 piece Ø 300 (250) x 35 Power: 3,0 KW Power: 3.5 KW Operating voltage: 3 ~, 400Volt, 50 Hz Rated current: 8A Back-up fuse: max 16A Control voltage: 24V/DC Width: approx. 500 mm + Handwheel 74 mm, + dust spout 130 mm Altitude: 1.382 mm Working height: approx. 1.080 mm Depth: 1,209 mm Weight: 310 kg Sound pressure level: At speed 700 rpm 64 dB(A) at a speed 1500 rpm 74 dB(A), when machining a workpiece with maximum speed of 82 dB(A) Scope of delivery: Rotary head Bürstentgratmaschine GratMaxx with power socket without cable Workpiece support table with adjustable angle stop and

Condition: used, Year of construction: 2017, operating hours: 1,800 h, No. 3131 CNC machining center FORMAT-4 profit H10 22.43 Used, year of construction 2017 Operating hours approx. 1800 h Package consisting of CNC machining center FORMAT-4 profit H10 22.43, feeding unit FORMAT-4 L-Motion and extraction unit FELDER RL 300 Technical data CNC machining center FORMAT-4 profit H10 22.43: Matrix table system made of phenolic resin Raster table with two stop rows Automatic central lubrication HARDWARE control computer Mobile control panel Handheld terminal for remote control of the axes Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine stand: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24000 rpm Central extraction via merged connections (D=250mm) Woodflash German software (H20/H08/H10/H50) Travel of axes H10 22.43: X= 5230 mm / Y= 2560 mm / Z= 280 mm Working field: X= 4300 mm / Y= 2160 mm / Z= 105 mm Axis positioning speed: X= 100 m/min / Y= 100 m/min / Z= 30 m/min Technical data feeding unit FORMAT-4 L-Motion: Year of construction 2017 In 2-axis version with 4 storage locations for feeding an H10 with lifting table Feeding the CNC Gentle transport Fully automatic panel handling Workpiece sizes: Length 2000-4200mm / width 600-2100mm / thickness from 8mm / panel weight 200kg Density: chipboard 650kg/m3 / MDF raw 750kg/m3 Stacking height 1800mm Technical data extraction unit FELDER RL 300: Year of construction 2023 Nominal volume flow 6000 m3/h, H3 GS dust-tested, JET cleaning Compressed air connection 3/4 inch Lajdpfx Ajrrh T Asgzjk Connection pressure 7 - 12 bar with 40NL/min Operating pressure in the device 6 bar Chip container capacity 500 l Extinguishing device with powder extinguisher Dry fire extinguisher 12 kg Sale On behalf of customer, ex location Leipzig, without dismantling, without transportation and assembly Subject to errors in description and price Dismantling and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, SALES FROM STOCK Loading Capacity: 240 kg Max Platform Height: 4 m Occupants: 1 Platform Dimension: 1.15 x 0.6 m Overall Length: 1.32 m Overall Width: 0.76 m Overall Height: 1.92 m Platform Extension: 0.55 m Extension Load: 100 kg Up/Down Speed: 34/25 sec Turning Radius: 0 Maximum Slope: 1.5°/2° Lsdpfx Agjulah Nozjak Drive Tyres: 230 x 80 mm Gradeability: 25% Wheel Base: 1.0 m Travel Speed (Stowed): 4 km/h Travel Speed (Raised): 0.5 km/h Battery: 2 x 12 V / 100 Ah Lifting Motor: 24 V / 1.3 kW Drive Motors: 24 V / 0.5 kW Charger: 24 V / 15 A Weight: 660 kg Proportional Controls Automatic Pothole Protection Drivable At Full Height Non-Marking Tyres Automatic Brake System Emergency Lowering System Emergency Stop Button Cylinder Holding Valve Onboard Diagnostic System

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. Laedod Tqaljpfx Agzek The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), For sale: individual pieces of original deep hole drilling bits by Botek (Germany) – a renowned manufacturer of precision tools for metalworking. Single-lip drills (single-edge) with internal cooling, made from K15B carbide – very hard and wear-resistant. • Diameters from 3.0 mm to 10.2 mm • Working lengths from 150 mm to 480 mm • Internal cooling through the body • Material: K15B carbide (ultrafine grain) • For steel, stainless steel, aluminum, bronze, and engineering plastics The drills are designed for precise deep hole drilling with high dimensional stability. Applications include the aerospace, automotive, hydraulic industries, and toolmaking. Condition: New and used (pre-owned), but in good technical condition. Some items may require resharpening – an ideal base for professionals. //// PRICE SHOWN IS PER PIECE //// Lajdpfowg R I Eox Agzsk

Condition: excellent (used), Year of construction: 2007, Laboratory foam dosing station with foam mixer and applicator The system works in a similar way to the SUPRA MIX concept. Several chemicals are dosed and mixed with water and air in a controlled ratio. Recipes are stored on the controller and can be changed during operation. Foam applicator with mixer - Dynamic foam mixer with online dosing of 5 products + water - 5 dosing pumps - One direct inlet for mixing - Product monitoring for the chemicals - Air dosing valve - Dynamic foam mixer with adjustable speed - PLC control - Foam applicator - For one-piece carpets up to 1 m wide Lasdpfeu D E A Dsx Agzek applications Stain blocker Dirt, water and oil repellents Fluorocarbons Antistatic chemicals Plasticizers Flame retardants Antibacterial chemicals Moth and beetle repellents Pile stabilizers Anti-hair loss agents Resins for wrinkle prevention and dimensional stability Specification Foam density: 20 - 100 g/l (higher density at lower flow rate) Dosing range: 0.5 - 500 g/l (1:100 with each pump) Foam volume: 50 - 500 l/min Electrical data Connected load: 6kVA, 10A Mains voltage: 400V / 50Hz Control voltage: 24V Dimensions HxWxD = 1400 x 2100 x 860 mm Year of construction: 2007 Purchase price: 47600 ,- € Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: new, Motor power 230V / 2,35 kW belt opening 230 mm belt dimensions 2085 x 20 x0,9 mm weight 195 kg Speed 30 - 75 m/min. Cutting area 0° 185 / 150 x 150 / 220 x 150 mm Cutting area 45° right 110 / 100 x 100 / 110 x 90 mm Cutting area 45° left Cutting area 60° right 70 / 70 x 70 / 70x70 mm Laedpfed Hzd Djx Agzjk Cutting surface 60° left Description Metal band saw with infinitely variable electronic speed regulation and automatic lowering. Selector switch for hydraulically controlled or manual band arm lowering. Saw arm can be tilted up to 60° right Quick-action vice Band guide with 8 ball bearings Hydraulic saw band tensioning with tensioning pressure display and band break switch-off Incl. coolant device Incl. machine base cabinet further information can be found on the attached pdf document - please ask for further versions

Condition: good (used), 4 x Bonfiglioli wind turbine gearbox JB00001227 SN B6201603697 Lasdpowg E Utjfx Agzsk

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany Lajdpfofdkb Tex Agzjk - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: excellent (used), Digital printing system for carpet and textile printing ChromoJet is a valve-based jet printing technology that was developed by ZIMMER in 1976 and has been firmly established in carpet printing and printing on heavy textiles ever since. The digital printing systems in the ChromoJet family are suitable for all types of pile products in the 300 to 1,500 gsm range. ChromoJet works with high-speed valves. The pre-mixed, pressurized special or process inks are injected with injected deep into the surface of the pile with surgical precision, without any machine parts touching the fabric. The result is the deepest color penetration and outstanding print resolution. Dye classes: Acid and pre-metallized - for printing on polyamide (nylon) and wool Dispersion - for printing on polyester-based carpets Cationic - for printing on modified (cationic) polyester and acrylic fibers Reactive - for printing on polyamide, wool and cotton-based carpets and mats Applications Floor coverings such as carpets, rugs, carpet tiles, mats Machine data: Max. Fabric width 1100 mm Max. Print width: 1150 mm Number of colors: 8 per nozzle type Number of carriages: 1 Number of nozzles per color: HSV200: 4 / HSV400: 8 / HSV800: 8 Ljdpsuzgzcefx Agzsak Total number of nozzles: 160 Pattern resolution: HSV200: 1.667 mm dot size HSV400: 1.0 mm dot size HSV800: 0.5/0.33/0.25 mm dot size Electrical data: Connected load : 7 kVA approx. 10 A Mains voltage: 400 V, 3-, 50 HZ Control voltage: 24 VDC Max. Short-circuit current: 10 kA You can find more items - new and used - in our store! International shipping costs on request!

Condition: new, The ZIMMER Z151/R is a portable metal band saw for professional professional use for steel pipes in assembly. Technical data: Motor power 230V / 1,5kW Cutting speed 30 - 80 m/min. saw band dimensions 1.735 x 13 x 0,65 mm weight 37 kg Ljdeg Im S Dspfx Agzjak Order number Z151/R Cutting data Round material Square Rectangle 0° 150 140 150 x 140 mm 45° right 100 90 100 x 90 mm 60° right 70 65 65 x 70 mm

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard Ledpefdkb Ujfx Agzsak - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Motor power 1,2 kW 50Hz/400V belt opening belt dimensions 2450 x 27 x 0,9 mm weight 240 Kg Speed 35 + 70 m/min. cutting surface 0° 220 / 210 x 150 / 230 x 185 mm Cutting surface 45° right Cutting area 45° left 150 / 150 x 150 / 150 x 210 mm Cutting area 60° right Cutting area 60° left 90 / 90 x 90 / 90 x 100 mm Description The Zimmer Z241/R is a self-lowering saw for mitre cuts from 0° - 60° left. After the cut the machine stops by a safety limit switch. The lowering is infinitely variable via a hydraulic system. The saw arm can be raised to any position after the cut. The saw arm remains in the desired position. The Z241/R has the following equipment: Hydraulic cylinder, emulsion pump, eccentric clamp, base frame, saw band, 400V plug -16A-. The machine is delivered completely assembled and ready for immediate use. Footprint: 870 x 1550 x 1740 mm Working height: 915 mm Lodogrlapspfx Agzsak please ask for further versions

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable Lasdpfsfdkbhjx Agzsk - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Lsdpfsd Tbbdox Agzjak - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Ljdpfjguk Dkox Agzeak Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. Ljdpfjguk Dvox Agzeak When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) Lasdpfx Agsguk A Hezjk - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.