Hammer-mill

NEUE HERBOLD HM 450/300

Year of construction: 2023, condition: ready for operation (used), Two Vecoplan scraper chain conveyors are available. 1) VKU 800, year of construction: 2023, drive power: 5.5kW, belt speed: 24m/min, conveying capacity: approx. 120m³/h, belt width: 820mm, max. incline: 70°, section length: 10.2m. 2) VKU 1100, year of construction: 2023, drive power: 11kW, belt speed: 24m/min, conveying capacity: 180m³/h, belt width: 1150mm, max. incline: 70°, section length: 22mm. Documentation available. On-site inspection is possible. Iedpfx Abjt Iw Ryegjia

Condition: new, functionality: fully functional, machine/vehicle number: NEW-5, empty load weight: 734 kg, maximum load weight: 2,766 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,840 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K1 306 184 3500 2E Rear Tipper NEW VEHICLE Internal dimensions: 306cm x 184cm Side wall height: 30cm Loading platform height: 68cm Gross vehicle weight: 3500kg Payload: 2746kg Braked tandem axle trailer Overrun and hand brake by AL-KO Largest possible axle and brake configuration Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side walls with tension locks All sides foldable and removable 15mm thick, slip-resistant and robust phenolic plywood floor Additional steel plate on wooden floor Automatic jockey wheel, 400kg support load 8 noise-reducing lashing rings with 800kg pulling force Reinforced 13" C-type tires with steel valve M+S tires Mesh/rope hooks on the frame 13-pin plug LED front marker lights Rear lamps with reversing light, rear fog light, and triangular reflectors Upper frame mounted on rubber buffers Large rear tipping angle of 51 degrees Electric tipping operation with plug for charging the 12V battery OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with carrier - Without side walls (discount) - Side wall height extension to 35cm - Black Edition (black powder-coated side walls and rims) - Integrated loading ramps 2800kg - Battery charger - Remote control - Bluetooth remote control - Emergency hand pump - Safety support for maintenance work when tipped - Folding crank rear supports - Complete LED lighting - Anti-theft device - Mesh cover (fine or coarse) - H-frame - Mesh grid in various heights, also fully enclosed - Side wall extensions 30cm with tension locks - Flat tarpaulin with or without bows - High tarpaulin 160cm - 200cm Further accessories available on request! Iiedpoghpc Njfx Abgoa Plus delivery to Gera and vehicle registration document €250 net Images are example views and may include optional equipment offered at extra cost. Haven’t found the right trailer yet? We always have 50–100 vehicles in stock and ready for immediate pickup. The workshop is open for all types of repairs on weekdays from 8:00 am to 5:00 pm. Specialist in axle repair, also for caravans. We also offer a wide range of spare parts and accessories for trailers from various manufacturers. You’ll also find a wide array of rental trailers available. Visit us online or stop by in person!

Condition: used, Year of construction: 2006, Bruks drum chipper Iisdpoxr Trnjfx Abgsa Model 820CM Year of manufacture: 2006

Year of construction: 1992, condition: excellent (used), Gas burner Weishaupt WM-G50/2A version ZM Power 600-5200KW: Year:1992 including gas line from Dungs DN50. Iodpfxjhl In Ro Abgeia Мы говорим по русски! Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Storage location: Nattheim Iodpfx Abjvviytegoia

Condition: excellent (used), We offer a 30,000 liter water tank . Diameter 2,500 mm Length 6,900 mm plus insulation 100 mm Iisdek Dpznjpfx Abgoa With kind regards Tank Environmental Protection Wozniack

Year of construction: 1998, condition: excellent (used), NEUE HERBOLD cutting mill / granulator Universal mill - heavy version Made in stainless steel -Year of construction 1998 Iiodpfx Ash Rwc Ejbgea - made of stainless steel - from technical center (machine was used exclusively for test/demonstration purposes - Rotor diameter: 300 mm - Working width: 500 mm - 3 rows of knives

Year of construction: 2024, condition: new, The rolls cruhser RC 200 is ideally suited for crushing medium-hard, brittle, hard samples like coal, ore, slage, minerals, graphite and many more. Max. feed size* Iiodpfef Ulycex Abgsa

Condition: new, Year of construction: 2026, Consisting of large bale breaker Type MHB and straw shredder Type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (lead time approx. 15 weeks) Suitable for round or square bales. Includes frequency converter (FU) – regulates the speed of the chain conveyor. Iiedpfxeb Nulhe Abgoa The bales are placed on the chain conveyor, and the milling advance is activated. The milling tines tear the straw from the bale and hurl it into the hopper. Ideally, the combination of bale breaker and straw shredder is recommended here. Technical data – Bale Breaker: Performance: 1–2 bales per hour Up to max. 600 kg per hour (depending on screen size used in the straw mill and kW rating of the straw mill). Without straw mill, the bale breaker can process up to max. 900 kg/h straw. Max. square bale size: 2400 x 1200 x 800 mm (L x W x H) Milling motor: 5.5 kW, 380 Volt Chain conveyor feed: 0.75 kW, 380 Volt Dimensions: 3750 x 1730 x 2460 mm (L x W x H) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Surcharge for even larger straw shredder (18.5 kW): + €3,940 net Technical data, MHZ with special hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting knives Screen with interchangeable inserts; selectable perforations (10, 12, 15, 22, 30, 45 mm) With star-delta switch, phase protection, and 8 m power cable, plug-in ready Discharge nozzle: 160 mm Blowing distance approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Optional extras for a surcharge: Feed auger: + €970 net Cyclone (suspension by customer on site; should be no more than 10 m away): + €2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstrator): + from €9,950 net Optional rotary valve (renders material pressureless): + €5,750 net Control panel: from €1,620 net Special breaker extension 3 m (other sizes on request): + €9,750 net Briquetting press MPP 180 S; little used demonstrator 70 mm briquette – up to max. 100 kg/h from €39,700 net * Larger machines available on request --- Description: muetek bale breakers are designed for breaking up round and square bales of hay and straw. The shredder flanged to the bale breaker shreds straw from all types of cereals, hay, maize, and miscanthus. muetek machines of the MHZ / MHB series are characterized by robust construction and heavy-duty build quality. muetek MHB series bale breakers feature a chain conveyor onto which the straw bale can be placed using a front loader. The support surface is adjustable depending on bale type. The chain conveyor pushes the bale against the milling rotor. The feed speed is adjustable. The milling rotor is equipped with several teeth that tear open the straw bale. The separated straw is discharged. --- The machines are generally suitable for dry input material: - Straw - Hay --- Breaking up hemp bales is possible only with a special breaker (surcharge approx. €9,720 net, depending on configuration). Straw mill is not suitable for hemp processing. Requirements for input material: Max. moisture content 12%

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 92 880 13, opening: approx. 1.030 x 720 mm rotor-Ø x –width: 1.000 x 1.000 mm weight: approx. 13 t. Isdpfxjlhrufj Abgeia