Motorized calender with 4 rollers

OMEC

Condition: like new (used), functionality: fully functional, AUTOMATIC CUTTING SAW machine for solid wood model OMEC TA 185 Nwsdpfx Aszfggfsf Uei second hand machine working condition : excellent CE mark: YES instruction booklet: YES cutting diagram . see attachment with rollers tracks ( as in photo ) n.01 stop max.blade diam.mm.550 motor power Hp 10 volt. 380/50

Condition: new, Fastech 3-Roll Round Bending Machine FRM 1250 x 90 Technical Specifications: Nwodpfxehzq Dqj Af Uei Special equipment included in the price: hardened rollers motorized rear roller adjustment digital display Sheet metal width 1250 mm Sheet metal thickness 3.0 mm max. Sheet metal thickness 2.5 mm for pre-bending Roller length 1250 mm Roller diameter 90 mm Smallest bending diameter 130 mm Weight 500 kg Dimensions L-W-H 1950 x 900 x 1130 mm Motor: 1.1 kW Equipment: Top and bottom rollers, electrically driven Top roller can be swung out Taper bending device asymmetrical roller arrangement self-braking main motor separate control and operating panel safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: excellent (used), functionality: fully functional, overall weight: 400 kg, Available: OMEC 750 automatic dovetail milling machine for drawer joints. The machine is used, has undergone technical inspection, is fully functional, and ready for operation. Before purchasing, it can be started and thoroughly inspected at our company's premises. Nwsdpfx Afozmhlxs Usi The machine's greatest advantage is its automatic cycle for milling dovetail drawer joints across the entire set working width. Pneumatic clamps stabilize the workpieces, and the ability to simultaneously machine both parts of the joint streamlines the serial production of drawers, box-type furniture, and carpentry elements, ensuring high repeatability of the machining process. Specifications: • Manufacturer: OMEC • Model: 750 • Machine type: automatic dovetail milling machine for drawer joints • Condition: used, after comprehensive inspection • Total power: 1.1 kW • Adjustable feed rate of the milling head • Maximum milling width: 480 mm • Automatic milling across the entire set working width • Ability to machine individual parts or both parts of the joint simultaneously • Pneumatic clamps for the workpieces • Ability to adjust machining parameters depending on the cutter used and the joint being made • Weight: approximately 400 kg • Overall dimensions: 135 × 75 × 120 cm (W × D × H) Additional information: • The machine is preserved in its original condition, after technical inspection and preparation for operation • The photos show the actual condition of the machine offered • Free machine operation training at our company's premises • The price stated in the auction does not include VAT Financing and transport: • We arrange transport using the MDD fleet, courier companies, or external carriers • We assist in obtaining a lease or leasing loan • The delivery cost depends on the destination and the method of machine transport

Condition: new, The manual milling machine Omec 650-M is utilised to indent dovetails for drawers and various furniture elements. The machine is equipped with a mill spindle which allows cutting of indents of adjustable height. The machine can cut four types of indents with different pitches. Locking and unlocking of pieces takes place manually by means of eccentric ar- bores. The controls are realised with a magnetothermic switch that is directly installed on the terminal board of the motor, and lever hand wheels installed at the sides of the machine. The machine is designed and built according to EC Safety Standards installed power 0,75 kW, 400 V, 50 Hz no of spindles # 1 spindle revolutions 16.500 RPM machine weight 100 kg machine dimensions (l x w x h) 450 x 540 x 1420 mm Nsdpfjdcdwbox Af Uewi work piece dimensions: work piece lenght 200 – 1500 mm work piece width 60 – 280 mm intent height 5 – 18 mm front thickness 7 – 45 mm side thickness 7- 30 mm The machine is supplied with the following components: - Eccentric HSS mill cutter assembled on the machine - Tool Kit for adjustments and maintenance - User's and instruction manual

Condition: used, Year of construction: 2024, Cloth cutter Kolbus: KS 601 Year: 2024 Slitting and cross cutting machine for roll material. Suitable for the processing of calico, linen, leatherette, wax cloth, gauze, shirting, PVC and other similar coated materials. Standard equipment: Nwsdpfx Afjvqbhlo Usi - main drive with servo drive - operating desk for standard and inching operation including speed adjustment - moveable material mounting shafts Special equipment: - cross cutting module and split cutting module with 10 circular knives - deposit delivery Material width: Max 1.600 mm Maximum cutting width: 1524 mm Minimum cutting width: 50 mm Maximum length of cut: max. 1.100 mm (for length and cross cutting) Minimum length of cut: 100 mm Material roll diameter: 500 mm Max. mechanical speed: 50 cuts/min Net performance depends on material, format, ... Note!: Technical specifications are subject to typing errors, as well as format or design modifications in comparable models from the manufacturer.

Condition: new, functionality: limited functionality, Year of construction: 2025, control type: manual, Equipment: CE marking, documentation/manual, OMEC 4-Roller Mechanical Symmetric Plate Rolling Machine with Double Pinch 1530×2.5 mm Brand new, CE certified. Made in Italy. Double pinch. Top and bottom rollers powered with equal torque. Side rollers motorized for upward/downward movement. Front-opening top roller. Special bearings for side rollers. External lever to control roller inclination. Sheet clamping with bearing-actuated device. Two-pedal foot control. Electrical panel compliant with CE standards. Millimeter indicator for sheet clamping position. Standard equipment included with the plate rolling machine: - Frontal conical device on top roller. - No. 2 digital displays for the side roller positions. - No. 1 digital display for the motorized sheet clamping. - Grinding/Turning of rollers after hardening treatment. - Roller hardening. - Side sheet loading table with sheet centering stops, marked in mm. Working length: 1530 mm. Top and bottom roller diameter: 90 mm. Side roller diameter: 95 mm. Plate thickness: 1.5 – 2 – 2.5 mm. (1.5 x D / 3 x D / 5 x D). Roller hardness: 55/60 HRC, 2 mm case depth. Installed power: 1.8 kW. Dimensions: 2290 x 750 x h 1150 mm. Weight: 690 kg. Nsdpey E Schjfx Af Uewi

Condition: new, OMEC 3-roll mechanical symmetrical calendering machine with double feed New “CE” marked Made in Italy USEFUL WORKING WIDTH: 2050 mm UPPER ROLL DIAMETER: 150 mm LOWER ROLL DIAMETER: 150 mm SIDE ROLL DIAMETER: 150 mm MAX. CALENDERING THICKNESS 1.5 x D: 4 mm MAX. CALENDERING THICKNESS 3 x D: 4.5 mm MAX. CALENDERING THICKNESS 5 x D: 5 mm MACHINE DIMENSIONS: 920 x 3400 x 1100 mm TOTAL INSTALLED POWER: 6.5 Kw WEIGHT: 1700 KG The FX3-3 series distinguishes the asymmetrical 3-roll mechanical calendering machines with a simple FULL FEED system. The side roll (bending roll) is mounted as standard with steel supports and bearings, and bronze pads on the outside guarantee maximum reliability and minimal friction over time. The rotation of the rolls is applied to the UPPER roll and the LOWER roll via a gearbox and a self-braking motor, and the translations and sheet clamping also use motors and gearboxes from leading brands. Equipped with hardened rolls, motorized translation and clamping, preparation for mounting profiled rolls and a conical device positioned directly in the upper roll, these machines represent the best compromise between absolute quality and ease of use for the operator for the most varied cylindrical and conical calendering operations. As standard, the upper roll opens laterally to extract the calendered sleeve. MACHINE CONFIGURATION: UPPER and LOWER ROLLS, MOTORIZED, rotating with equal power. SIDE ROLL, MOTORIZED, for up/down movement. MOTORIZED SHEET CLAMPING. DIGITAL DISPLAY for the position of the side roll. DIGITAL DISPLAY for the sheet clamping height. ROLL HARDENING: HRC 55/60, DEPTH 2 mm. Side roll supports in steel + sealed bearings + external bronze pads. PREPARATION FOR INCLINING the side roll(s) to create cones (conical device excluded). EXTERNAL CONTROL LEVER for roll inclination (right) for FX3.2/FX3.3 - (right + left) for FX4.1/FX4.2. PREPARATION FOR PROFILED ROLLS. FOOT PEDAL: 2 PEDALS + control for side roll up/down movement and sheet clamping + emergency stop button. ELECTRONIC CONTROL of feed stages. ELECTRICAL PANEL COMPLIANT WITH CE STANDARDS. INCLUDED WITH THE MACHINE: - Front conical device in the upper roll. - Digital display for the position of the side roll. Nwjdpegyk S Aofx Af Uoi - Digital display for the sheet clamping height.

Year of construction: 2025, condition: new, Beltpress for fruits and vegetabes Beltwith 1250mm capacity up to 10000 kg/h 27 rollers Nwedpfsbpz D Aex Af Uji beltcleaningsystem with brushes and highpressurecleaning

Condition: good (used), Code: 0125 Brand: OMEC - ITALY Model: F8 - CE Standard Automatic dovetailing machine for dovetail joints on drawers and various furniture elements - CE Standard Nwjdpfowl Iv Rox Af Uoi The machine is equipped with a unit of 8 spindles with equal mill cutters that allow the production of indents of different heights. Technical data: No. 8 spindles Spindle revolutions /min 17,000 Maximum working width mm 400 Distance between centres of indents mm 25 Drawers production 120 / hour Power Kw 7,5 Working pressure 6 atm Overall dimensions: mm 1500 x 1000 x 1200 h Weight kg 1100

Condition: good (used), Code: 0106 Brand: OMEC - ITALY Model: 650-M Dovetailing machine Nwedpfoyg N Hlsx Af Usi Technical characteristics: Installed power on board machine Kw 0,75 Max working width mm 420 Center to center of indents mm 25-40-50-80 Overall dimensions: mm 800 x 720 x 1320 h Weight kg 130

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 2,560 h, load capacity: 1,600 kg, lifting height: 4,950 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,150 mm, fork length: 1,200 mm, empty load weight: 3,400 kg, total length: 2,114 mm, drive type: Elektro, construction width: 1,100 mm, Electric 4-wheel forklift Load centre: 500 Mast type: Triplex Speed class: 20 Nwodpsw U E Uuofx Af Uei Condition: Ready for use and fully functional Technical condition: normal Front tyre type: Non Marking Front tyre condition: 60 - 80% Rear tyre type: Non Marking Rear tyre condition: 60 - 80% Battery voltage: 48V Battery capacity: 625Ah Battery type: PzS Sideshift, 3rd valve, rear work light, front work light,

Condition: excellent (used), OMEC TA185 crosscut saw Maximum cutting height 180mm Nwodpjrk Nxgefx Af Uji Maximum cutting width 900mm Saw diameter 550mm Pneumatic material clamping Pneumatic saw pass Saw control with two buttons Main motor with a power of 7.5kw 2x roller tables length 160cm each CE certificate Technical documentation

Condition: good (used), functionality: fully functional, Crosscut Saw OMEC TA185 Maximum cutting height: 180 mm Maximum cutting width: 900 mm Saw blade diameter: 550 mm Pneumatic material clamping Pneumatic saw feed Nodpfx Afoy Sff No Uswi Saw operated via two-button control Main motor power: 7.5 kW Machine dimensions: 492x145x120 cm (H) Weight: 600 kg

Condition: as good as new (ex-display), Year of construction: 2023, Container rotating device, 10-ton lifting capacity Speed: continuously adjustable Hand and foot remote control Diameter: 320mm to 2800mm Roller diameter: 300mm Speed: 6 - 60 m/h Nodpfx Aod Nmx Tef Uowi Power: 2 x 0.55 kW

Condition: used, functionality: fully functional, OMEC 450 Manual Drawer Joint Milling Machine – after technical inspection, ready for operation Specification: • Condition: Used, after comprehensive technical inspection • Manufacturer: OMEC • Total power: 1.1 kW • Max milling width: approx. 35 cm • Manual head feed • Pneumatic clamps – 4 pcs. • Overall dimensions: 90 x 60 x 128 cm (W x L x H) Additional information: • The machine is in good technical condition, ready for immediate use • Shown photos reflect the actual condition of the item for sale • Possibility to switch on and test the device on site • Free machine operation training (at the company headquarters) Nwedpfx Afey R Ewpo Uoi • The price stated in the listing does not include VAT and transport costs Financing and transport: • We arrange transport via MDD fleet, courier companies or external carriers • We offer financial support in the form of leasing or lease loan