Metal mitre band saw machine

OPTIMUM SD 300 V

Condition: new, Year of construction: 2022, operating hours: 1 h, machine/vehicle number: 268955558, GREMAC e1 trommel screen Tandem chassis / axles 2x kg ( permissible total weight) kg empty weight without aggregate Overrun brake Vehicle lighting according to StVzO TÜV acceptance Drum length: mm Diameter: mm 4,0 kW electric drive speed adjustable with frequency converter driving screw adjustable cleaning brush hopper with conveyor belt rubber belt with chevron profile 0,75 kW electric drive speed adjustable with frequency converter Fine grain collecting belt Movable suspension Rubber belt in smooth design 1,5 kW electric drive Speed adjustable with frequency converter Fgjdpfx Ael Hbcfea Asa Fine grain belt Movable suspension Rubber belt with chevron profile 2,2 kW electric drive Speed adjustable with frequency converter 25 angles of inclination Manual winch for angle adjustment Over-grain stockpile conveyor Movable suspension Rubber belt with chevron profile 1,5 kW electric drive Speed adjustable with frequency converter 25 angles of inclination Manual winch for angle adjustment Control system PLC Siemens Logo Control panel with buttons and potentiometers 400V load circuit 24V control circuit Main switch Ceekon 16A socket EMERGENCY OFF relay Without generator Cladding Hot galvanized frame parts painted drum cladding powder coated in RAL7005 and 5018 Further information Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good, Delivery conditions: EXW,

Year of construction: 1993, condition: used, Chamfer lenght: 3.000 mm Fsdskh Niqjpfx Aa Ajga Stands passage: 2.750 mm Max. pressure: 180 t Control: CYBELEC DNC 70 Stroke: 220 mm Total power: 15 kW Weight of the machine: 11.000 kg

Condition: ready for operation (used), functionality: fully functional, total height: 1,200 mm, total width: 580 mm, total length: 820 mm, input voltage: 230 V, The machine is designed for pitting plums, leaving the plums whole. Fgedpfx Aaow H I Trs Aea Electrical connection: 230 V. Machine dimensions mm: 820 x 580 x h1200. Originally, the machine is equipped with 10 blades, but 2 blades were already lost when it was purchased, but this does not interfere with the operation process at all. Only the yield is slightly lower. Productivity with 8 blades: 100 fruits / 1 minute Hole diameter: 30 mm. Machine weight: 100 kg.

Condition: new, Year of construction: 2026, CORMAK PBM290 horizontal drilling machine is a professional device created for efficient wood machining. It is equipped with advanced solutions ensuring perfect quality of finished products. Machine features high-quality guides, providing easy table height adjustment easy one-handed usage due to a well-placed handle simple and smooth table movement left/right spindle rotation 100 mm diameter extracting connector Table dimensions 500 x 200 mm Drilling table height 760–900 mm Maximum drilling width 300 mm Maximum drilling depth 140 mm Spindle speed 2850 rpm Drilling chuck 0–16 mm S1 continuous work motor power 2.2 kW Power supply 400V Dimensions 770 x 920 x 1245 mm Weight Fgsdpfxjvuq Dks Aa Aoa 102 kg

Condition: excellent (used), Free-standing aluminium silo on foot ring (previously used as a milk powder silo) – used – designed for a bulk density of 0.65 kg/dm³ Volume: 94,000 litres Manufacturer: P+W Metallbau Quantity: 1 Diameter: approx. 3,000 mm Cylindrical height: approx. 17,000 mm Material: AlMg3 Bulk density: 0.65 kg/dm³ Upper head roof pitch: 15° Equipment and connections: Upper head: 1 x access manhole DN 600 with cover 1 x vent nozzle DN 300 with hood 4 x flange DN 100 2 x flange DN 150 Shell: 1 x access door, approx. 850 x 2000 mm with ventilation slots 1 x flange DN 50 for sensor probe 6 x pipe holders for fill pipe (fill pipe not included) 6 x brackets for access ladder (ladder not included) Fgsdpfei E Hnysx Aa Aoa Various pipe penetrations in the area of the lower supporting ring The silo has a 60° cone at the bottom with a vibrating floor (DN 1500). The currently installed measuring and control technology is included in the price, but no warranty is given for its functionality! Otherwise as per images and drawing.

Condition: good (used), Please read the technical specifications in full. If you are considering the machine as an investment, we kindly request your complete identification, including a valid telephone number and email address, in order to provide you with an offer. DECKEL Tool Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Travel distances: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of the milling head arm: 100 mm Expansion of working area to: 300 x 260 mm Spindle speed vertical/horizontal: 40 – 2,000 rpm Number of gear stages: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed X/Z-axis: 5 – 500 mm/min Feed adjustment: stepless Rapid traverse X/Z-axis: 1200 mm/min Feed Y-axis: manual Fixed angular table: 600 x 210 mm Swivelling vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data are not binding! Features: - For horizontal machining, the milling head is swiveled by 90 degrees and pushed backwards. - 3-axis precision digital readout HEIDENHAIN - Stepless feed in X/Z axis - The machine underwent partial overhaul by a specialist company several years ago. Fgjdpfxoxyc Tke Aa Aja Equipment: - 3-axis HEIDENHAIN digital readout - Micro-cooling spray unit - Fixed angular table - Chip tray - Machine lamp - Machine feet Further accessories available upon request! Condition: good to very good, from training workshop Available from March 2026

Condition: new, Year of construction: 2025, New machine. Please ask for current price and delivery time. Dimensions and weights: Length (product): approx.2129mm Width/depth (product): approx.1046mm Height (product): approx.1687mm Weight (net): approx.645kg Electrical data: Power drive motor: 3kW Supply voltage: 400V Mains frequency: 50Hz Hydraulic pump motor power: 1.4kW Motor power coolant pump: 100W Total connected load: 3.8kW Machine data: Saw blade speed(s): 20 - 80m/min Saw blade length: 3770mm Saw blade width: 34mm Saw blade thickness: 1.1mm Cutting angle: -45 - 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting ranges: Cutting range 0° round (solid material): 355mm Fgedporah S Hjfx Aa Asa Cutting range 0° square (solid material): 300mm Cutting range 0° rectangular upright (solid material): 300 x 490mm Cutting range -45° round (solid material): 290mm Cutting range -45° square (solid material): 250mm Cutting range -45° rectangular upright (solid material): 250 x 250mm Cutting range +45° round (solid material): 350mm Cutting range +45° square (solid material): 290mm Cutting range +45° rectangular upright (solid material): 290 x 340mm Cutting range +60° round (solid material): 230mm Cutting range +60° square (solid material): 180mm Cutting range +60° rectangular upright (solid material): 180 x 220mm

Condition: new, empty load weight: 17,250 kg, maximum load weight: 48,700 kg, overall weight: 66,000 kg, axle configuration: 3 axles, loading space length: 7,550 mm, loading space width: 2,480 mm, loading space height: 375 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 17,250 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered and removed hydraulically -For tractor units: 6 x 4 and 8 x 4 (or 6 x 4 with optional 1-axle dolly) Low bed: -Low bed with external supports, designed as a telescopic tank bridge in low construction with extension at the front -Length x width approx. 7,550 mm x 2,740 mm -Mechanical locking of the extension Chassis: -Chassis at the rear with closed outer frame -Checker plate covering and continuous prism excavator trough approx. 1,450/900 x 505 mm, open at the rear Axles, suspension and tires: -"PENDEL-AXLE", all axles hydromechanically forced steering -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and pins for securing in raised position -Final painting of axles with 2 layers of 2-component paint in a single color in "FAY-Gray-34-0260" -Technical axle load 12,000 kg -Hydraulic axle compensation -245/70 R 17.5 Accessories: -Steel bulkhead, plug-in, approx. 400 mm high -4 wheel chocks -Gooseneck in the rear upper area closed with a removable cover Fgjdpfx Aajh Hm Tzj Aja -1 pair of steel ramps with climbing strips and fastening bolts to bridge the hooks of the low bed -The ramps can be placed over or between the hooks -Fastening options for the steel ramps at the rear between the outer supports of the gooseneck -One Locking point approximately every 1,000 mm on the extension -1 lashing ring on the left and right on the front cross member -Connection strip for supply lines to the tractor unit, attached at the height of the outer frame profile -6 pairs of threaded blocks on the outside of the inner supports of the loading area for mounting screwable rings M24 -6 pairs of countersunk lashing rings on the outside of the outer supports of the loading area, foldable inwards and outwards -1 pair of threaded blocks at the front and rear of the outer supports of the loading area for mounting screwable rings M24 -Hanging strip for loose aluminum loading ramps on the vehicle's end cross member -Central lubrication system with 2 pumps, BEKAMAX brand -Steering from the front and rear, operated by cable remote control, with alignment control of the axles -3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches -Removable loading floor (galvanized) in 3 elements can be inserted between the outer supports with hardwood flooring -Foldable extensions, by approx. 230 mm per side -Extension planks, loose, framed in steel -4 warning signs approx. 423 x 423 mm -Radio remote control for operating the steering -3.5" king pin -Anti-slip sticker on the left bevel of the gooseneck -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings -Guide plate from the gooseneck for the fifth wheel plate, approx. 800 mm wide -1 spare wheel with mounting adapter -Parking position on the gooseneck for the warning signs when not in use -2 pairs of stake pockets embedded in the outer frame of the chassis, for plug-in stakes approx. 100 x 50 mm -Dipper handle recess of the rear chassis closed at the back with a plug-in plate -Color of the trailer MB 7350 Novagrau

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 18,5 kW ✔ Shaft length: 550 mm ✔ Shaft diameter: 260 mm Fgodpfxoiq U A Ss Aa Aea ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 14 ✔ Granulation: 10-30 mm ✔ Capacity: up to 4 m3/h* ✔ Material discharge opening: 160 mm ✔ Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) ✔ Filling opening: 939 x 567 mm ✔ Dimensions L/W/H: 1,88/1,12/1,67 m ✔ Weight: 1250 kg 2 years warranty or 2000 working hours

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 51265 Year of manufacture: approx. 1967 Travel paths X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle taper SK 40 - S20 x 2 Spindle speed 40–2000 rpm, 16 steps Fodpfx Ajghtvaja Asga Motor power 1.0 and 1.6 kW, pole-changing Power supply 380 Volt, 50 Hz - Feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at vertical milling head 60 mm - Swiveling, rotating, and tilting angle table - Coolant pump in machine base - Separate control cabinet Space requirements L x W x H 1100 x 1100 x 1600 mm Weight 690 kg In good condition