3-roll round bending machine

Ostas ORM 1070 x 130

Condition: new, Year of construction: 2025, - Capacity: 1070 x 5 mm - Electrically adjustable rear roller - Electrically adjustable bottom roller (for material clamping) - Digital display for rear roller movement - Hardened rollers - Tapered rollers - Emergency stop - Documentation - 400V Gbedsgg Nv Sjpfx Al Usu

Year of construction: 2016, condition: excellent (used), 1 used short bar loader Manufacturer: Breuning Gjdpfoht Rl Ejx Al Usbu Type: ILS RBL 80/12 Year of manufacture: 2016 Clamping range: 5-80 mm diameter Length: 100-1200 mm

Condition: new, Year of construction: 2025, number of rollers: 3, roller (bottom) diameter: 130 mm, roller (top) diameter: 130 mm, side roll diameter: 130 mm, roller length: 1,070 mm, sheet thickness steel (max.): 5 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, - Capacity: 1070 x 5 - Electrically adjustable idler roller - Digital display for rear roller movement - Hardened rollers - Conical rollers - Rotatable top roller - Brake motor - Foot control - Emergency stop - Documentation Gbsdpfoirwlaex Al Usu - 400V

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device Gjdpfx Alsu Nigke Ujbu - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm column daylight (nach hinten) 630 mm total power requirement kW weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table - automatic stroke adjustment - automatic ram adjustment - hydr. Overload - Ejector - Grease central lubrication - Cover plate for drainage hole Gbjdpfxotycdkj Al Uou - Continuous speed control using a frequency converter - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen - current UVV test with braking time measurement

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: Gbsdpfx Aleuagxpo Usu - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: as good as new (ex-display), JAN REILING BV has an extensive warehouse with more than 15,000 different DEMAG craneparts, from a nut to a complete crane. In addition to new parts, we also supply used parts, hoists and cranes. Our used hoists, cranes, parts and drives are ready in our warehouse completely overhauled. JAN REILING BV immediately supplies what you are looking for. JAN REILING BV has built up an extensive supplier network within Europe. In addition to DEMAG, we can also supply you with parts from all other brands quickly and affordably. We supply various Demag parts new from stock, such as a: ropeguides Rope brakes hoistingmotors drivingmotor gearbox brake hoisting motor bottomblock loadhook runningwheels trolley pushbutton radiocontrol cabledrum types like : KBH KBF KBS KBA KBU 13/3PF 13/6PF 13/3KF 13/6KF 16/6KF 16/8KF 52D 52DF 62D 62DF 63D 63DF 72D AFW D04 D05 D06 D08 ZBA ZBF ZBR DH P100 P625 P632 P425 P408 P412 P1250 P1050 P1600 P2100 DH DMR DR DC PK DK Gbsdpfx Aoh Upyhel Uou contact us for the possibilities We supply both new and used

Year of construction: 2017, condition: ready for operation (used), A Strausak CNC 5-axis tool grinding machine for the production and resharpening of solid carbide, HSS and special tools is available. Travel X/Y/Z: 420mm/250mm/485mm, B-axis: 340°, C-axis: 360°, Rapid traverse X/Y/Z: 15m/min, max. tool diameter production/resharpening: 32mm/150mm, max. tool length: 500mm, max. cutting length: 300mm, Tool holder: HSK63F/SK50, Speed: 12000rpm, Tool positions: 6. Machine dimensions X/Y/Z: approx. 2250mm/2200mm/2200mm, Weight: approx. 4350kg. Documentation available. An on-site inspection is possible. Gedezg Itispfx Al Usbu

Condition: used, Automatic in-line welding machine for PVC profiles (or similar), with a cycle fully controlled by PLC. Operating cycle: PLC with digital control of temperature and welding/cooling intervals via display. Gjdpsyw Rx Eofx Al Usbu Adjustable profile support arms, facilitating positioning and ensuring operator safety. Machine in perfect working condition, subject to regular annual maintenance, complete with manual.

Condition: as good as new (ex-display), Year of construction: 2025, CMS Taktika Vertical cnc working center for Glas Bearbeitungsmaße: Max. Glas-Length: 3.100 mm Max. Glas-height: 2.000 mm Min. Glas-length: 320 mm Min. Glas-height: 220 mm Thickness: 4-15 mm Options: - 2x groups of suction cups which 2 suction cups on each group Gbodpfxowd Iche Al Uou - 2x Elektrospindle 6 kW 0-12.000 U/Min - Tool Magazin with 12 slots - Additional drilling from the backside - CAD/CAM - central lubrification