Cutting machine

Posch Linia

Condition: used, fuel type: diesel, weight max. in kg:5000 kg Load Arm:600 mm arm length:2000 mm stroke:3200 mm :12000 kg :4500 kg height over floor:2460 mm weight of the machine ca.:8,2 t dimensions of the machine ca.:4,15 x 1,45 x 2,46 m :3,05 x 1,45 x 2,46 m Diesel boom-fork lift with particle filter, hydraulic swivelling 2-fold telescope boom with 2 hooks, up to max. 2000 mm extension Hnodpfx Ascxxzhjd Djw 5000 kg at 600 mm SL; 3700 kg at 1000 mm SL; 3050 kg at 1400 mm SL. Solid-rubber tyres. Engine temperature indicator, front lights, brake lights, indicators front and rear, reversing lights, adjustable driving seat. UVV until 02/2008.

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 18,5 kW ✔ Shaft length: 870 mm Hnsdpfx Aohzlr Ied Dow ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 2x19 ✔ Granulation: 10-50 mm ✔ Capacity: up to 7 m3/h* ✔ Material discharge opening: 200 mm ✔ Filling opening: 1446 x 1565 mm ✔ Dimensions L/W/H: 2,15/1,97/2,04 m ✔ Weight: 2050 kg 2 years warranty or 2000 working hours

Condition: used, Year of construction: 2001, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 100 mm, cutting width (max.): 245 mm, working height: 100 mm, type of input current: three-phase, – Year of manufacture: 2001 – Optimization – Cutting to line – The machine has additional tables, allowing a maximum cutting length of up to 6500 mm; currently reduced to 3400 mm – 8 cutting beams TECHNICAL SPECIFICATIONS: – Max. cutting length: 6500 mm (currently 3400 mm) – Min. element length: 300 mm – Max. cutting height: 100 mm – Max. cutting width: 245 mm – Blade diameter: 450 mm – Motor power: 9 kW – Max. feed speed: 120 m/min – Acceleration: 10 m/s2 – Optimization according to length and value – Pneumatic material clamping – Five ejection units – Intelligent, controlled waste chute Hnjdpjwtzrhjfx Ad Dew – Vario speed system – Total length: 17,500 mm – Transport dimensions (L/W/H): 800 / 245 / 220 cm – Weight: 3,500 kg

Condition: used, Year of construction: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defecting mode. This machine is ideal for precise solid wood cutting, featuring automated detection and elimination of material defects. Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of construction: 2001 Commission no.: 0682-10 Rotary current: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Nominal output: 11 kW Fuse protection: 25 A Hnjdpfx Adswtgcxs Dsw Condition: used

Year of construction: 1990, condition: good (used), used brushing machine with wacuum table Hjdpfx Aded Tanyo Donw

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Storage location: Nattheim Hnsdevviytopfx Ad Dew

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Hjdpfx Adow Sy T Ho Donw Storage location: Nattheim

Year of construction: 2015, condition: used, Posch Spaltfix S360 saw-splitter machine • Log diameter up to 355 mm • Splitting force of 12 t with autospeed • WIDIA circular saw blade Ø 900 mm • 8 blocks up to 500 mm length per work cycle • 4-way splitting knife (standard) • Hydraulic wood feed with 2 m long conveyor belt • Wood transport system • Hydraulic saw feed with automatic lifting and hold-down function • Category II three-point linkage • Including log stand Hjdpfjxfikmox Ad Donw • Neat combination!! Condition: Used Year of manufacture: 0

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Weinig Dimter OptiCut 200 Elite: Year of manufacture: 2004 Technical details: - Maximum cutting length: up to 6.3 meters - Maximum cutting width: 300 mm - Maximum cutting thickness: 100 mm - Number of ejectors: 3 units Feeding speed: Adjustable, from 10 to 250 meters per minute Control system: PLC with user interface, display, and optimization software Sensors: Equipped with various sensors for defect detection and cutting optimization Additional features: Automatic detection of defects and markers Integrated waste management system Possibility of integration with other production systems Hjdpfxew Dh Rro Ad Denw Machine characteristics: Precision: High cutting accuracy thanks to advanced optimization algorithms Performance: The machine is capable of quickly processing large volumes of wood, increasing production efficiency Safety: Equipped with various safety features, such as protective covers and emergency stop systems Flexibility: Adaptable to different types and dimensions of wood, making it a versatile tool for various applications in the woodworking industry Installation, commissioning, and operator training are available at an additional cost.

Condition: used, functionality: fully functional, Year of construction: 2020, Separation conveyor 2 pieces identical Hodpevtm Dqjfx Ad Dsnw