Lift table

Rehnen Hercules

Condition: new, Best price 4499 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 2200x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Ihodpfx Abednxydsrou Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 700 kg * Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

Condition: new, Year of construction: 2010, functionality: fully functional, Equipment: CE marking, double-sided, Linija za duzinsko spajanje sa dva frezera.Presa duzine 6000 mm. Masina je nova i nikada nije koriscena.Uz masinu idu svi pripadajuci alati. Ihsdpfxowptnmj Abreu

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 400 V Pluging: Three-phased Ihjdpsucir Rofx Abrou Power: 4,4 Kw Overall dimensions Lenght: 6620 mm Width: 3035 mm Height: 1741 mm Weight: 1200 Kg

Condition: used, functionality: unexamined, Clamping range: max. 240 mm Ihjdpfx Absw Npk Aerou Cutting height: max. 450 mm Cutting depth: max. 380 mm Motor power: 2.2 kW

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) Ihedomhhf Sspfx Abrsu - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Type 400C Surface planer: Table dimensions 400х1800 mm Cutterblock diameter 70 mm Cutterhead rotating speed 5700 rpm 3 knives 400x20x3 mm Max table adjustment 4 mm Thickness: Table dimensions 400x760 mm Max cutting depth 4 mm Feed speed 7 m/min Cutterblock rotation speed 5700 rpm Max working height 220 mm Min working height 4 mm Mortising: Table dimensions 250х500 mm Longitudinal stroke 205 mm Trasversal stroke 95 mm Chuck (SX) 16 mm Chuck rotation speed 5700 rpm Motor 3 kW Iodpfxsd Nl Sfs Abrehu Accessories: service wrenches, guards on mortise chuck, planer guide. Weight 390 kg

Condition: new, Year of construction: 2024, table length 2000 mm table width 1000 mm stroke height 400 - 1010 mm weight max. in kg 300 kg Iodpfxev Htkds Abrjhu weight of the machine ca. 220 kg

Condition: new, table length 2400 mm table width 1200 mm 4000 kg height of stroke 510 - 1550 mm Ihsdpfswz Rubex Abrou total connected load 1,5 kW connected load frequency 400 V weight of the machine ca. 0.95 t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Ribbed bottom for reinforcement.

Condition: new, Year of construction: 2025, Planer: Working table dimensions 400x1800 mm Cutting block diameter 70 mm Shaft rotation speed 5700 rpm Iedpfeg S N Agex Abrjhu The dimensions of the knives 400x20x3 mm Max. 4 mm table adjustment Thicknesser: Working table dimensions 400x760 mm Feed speed 7 m / min Working height 4-220 mm General parameters: Three-phase motor power 4.0 - 3.0 HP - KW Weight 380 kg The cast iron structure of the body, the exact limiter of the cross cut and the excellent quality of workmanship allow to achieve the best machining results. Machining is extremely efficient and accurate. The cast iron structure of the body allows for safe and effective processing of even large elements.

Condition: good (used), Year of construction: 1992, functionality: fully functional, saw blade diameter: 350 mm, Crosscut and mitre circular saw Graule ZS135, year 1992 -Motor power: 2 kW -Speed: 3800 rpm Ihodpfx Aeyhzlasbreu -Saw blade: Ø 350 mm, tiltable -Cutting capacity at 90° flat: 430 x 135 mm -Cutting capacity at 45° flat: 300 x 135 mm -Transport dimensions: 1150/910/H1200 mm -Weight: approx. 100 kg