Tool grinder

Saacke UW1F

Condition: used, Year of construction: 2013, operating hours: 26,721 h, functionality: unexamined, spindle speed (max.): 12,000 rpm, spindle speed (min.): 2,000 rpm, travel distance X-axis: 530 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 320 mm, table length: 245 mm, table width: 140 mm, SAACKE UW1F Center height: 155 mm Maximum tool diameter: 200 mm Maximum tool length: 270 mm X/Y/Z travels: 530/400/320 mm Feeds: 0 – 15 m/min Table size: 245 x 140 mm B-axis: Kodpfx Amjyma I Hezolr Rotation range: 240° Rotational speed: 180°/s Grinding wheel interface: HSK-E50 Grinding spindle: Speed: 2,000 – 12,000 rpm Power: 16 kW Liquid-cooled A-axis: Rotational range: ± 15 minutes Maximum speed: 600 rpm Spindle bore: 32 mm Axis drives: X/Y: 2 kW Z: 3 kW B: 2 kW A: 3 kW Grinding wheel changer: 4 positions Three stations on the table (max. diameter 125 mm) One station on the tool carrier (max. diameter 175 mm) CNC control: NUM AXIUM POWER with PC and software for: End mills Profile cutters Clamping systems Drills and step drills Roundness regulation 3D collision control Zero point compensation Voltage: 400 V / 50 Hz Operating hours: 23,904 hours Spindle hours: 9,846 hours Scope of delivery: RENISHAW 3D measuring probe mounted on the grinding head Coolant unit Various tools and tool clamping accessories Coolant and filter unit GS Industrietechnik RBAFWT113 ND Coolant filter unit GS Industrietechnik RBAFWT113 ND, year of manufacture 2013 Coolant filter unit BÜCHELE 511006

Condition: refurbished (used), Year of construction: 2013, Electrostatic air filter Indusa elstar EL4001 NVAS R/O Ksdpfx Asfyiqbemzjlr There are 3 units still available. Air intake is on the lower right, air outlet is on the upper left. The air filters are from 2010–2013 and have seen very little use, as operations switched to a central extraction system in 2014. All filters have been fully overhauled, cleaned, disinfected, and fitted with new internals. The units are in excellent optical and technical condition. Each unit undergoes a 24-hour test run prior to delivery. The elstar series’ thoughtful design, high-quality workmanship, and flexible modular system form the basis of its success among electrostatic air filters. The electrostatic air filter purifies contaminated machine exhaust precisely where it is generated—making the air breathable again! The elstar electrofilter is designed for the separation of oil mist, coolant mist, oil smoke, welding fume, vapors, airborne particulates, oxidized smoke, and aerosols, making it suitable for almost any industrial application.

Year of construction: 1991, condition: ready for operation (used), Axes: 5, max. grinding wheel diameter: 150mm, spindle speed: 9000rpm, workpiece spindle speed: 1500rpm, clamping spindle speed: 13000rpm, travel X/Y/Z: 200mm/190mm/150mm, tool holder: HSK-50, machine dimensions X/Y/Z: approx. 1700mm/1400mm/1800mm, control: NumRoto 1060, control defective. Including coolant pump and coolant tank, grinding wheel set with 12x holders. Documentation available. On-site inspection is possible. Kedevu Dfbopfx Amzslr

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: SMILE420X-03746, Equipment: type plate available, Zoller smile 420 / pilot 4.0 Pilot 4.0 program HSK-63 tool adaptor Kledpsv Sz H Defx Amzsr See brochure for further details Pick-up only

Condition: good (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: C4655, grinding length: 5,000 mm, grinding width: 500 mm, Sanding length: 5000 mm Sanding width: 500 mm Workpiece height: 250 mm spindle diameter in front bearing: 190.5 mm pivotable 0.7° Max. Torque: 1771 Nm Max. speed: 593 min/-1 Feed: infinitely variable 20-35,000 mm/min Trapezoidal segment head diameter 800 mm with Trapezsegmenten: 94/103x38x200mm Marposs measuring device Hydraulic upper part clamping and swiveling Sanding mist extraction system: Hydrocyclone cleaning system Kjdpfx Amjq U Ihvezelr Machine weight approx. 27.6 tons Space requirement approx.: 11.2 x 4.3 x 3 m

Condition: excellent (used), Year of construction: 2016, operating hours: 8,100 h, functionality: fully functional, machine/vehicle number: 2066-5172, Equipment: documentation/manual, CNC Tool Grinder WALTER HELITRONIC ESSENTIAL – year of manufacture 2016 For sale: 5-axis CNC tool grinder from the renowned manufacturer Walter Maschinenbau GmbH. The machine is designed for precision machining of cutting tools such as end mills, drills, as well as special and multi-flute tools. The unit is fully operational, regularly serviced, and maintained in excellent technical condition. BASIC DATA Model: WALTER HELITRONIC ESSENTIAL Year of manufacture: 2016 Control system: FANUC Number of axes: 5 Operating hours: 8,100 h Power supply: 3 x 400 V AC, 50/60 Hz Connected load: 25 kVA TECHNICAL SPECIFICATIONS Travel distances: X = 330 mm Y = 213 mm Z = 475 mm Rapid traverse speeds X, Y, Z: 15 m/min A axis: 360° C axis: ±200° Spindle speed: 10,500 rpm Spindle motor power: 9 kW Spindle diameter: 70 mm Maximum grinding wheel diameter: 150 mm Maximum workpiece length (peripheral wheel grinding): 255 mm Maximum workpiece length (face wheel grinding): 185 mm Maximum grinding diameter (complete machining): 100 mm Minimum working pressure: 6 bar Air consumption: 8,000 l/h Coolant pump capacity: 80 l/min at 7 bar Coolant tank capacity: 350 l Machine weight: 3,300 kg Software: Tool Studio version 2.1 EQUIPMENT AND FEATURES Automatic loading arm The machine is equipped with an automatic tool loading system. The arm picks up tools from the input tray, transfers them for machining, and then places finished tools onto the output tray. This enables fully automated, uninterrupted production without constant operator supervision. Capability for mounting two grinding wheels Simultaneous mounting of two grinding wheels increases operational flexibility, reduces changeover times, and makes it possible to perform more complex operations without frequent wheel exchanges. Cooling for electrical cabinet HAOSCH cooling unit included. Kledpfx Aeyz Dwcemzor Additional equipment Professional measuring device for end mills and drills, providing fast, precise, and repeatable measurements to facilitate tool setup before machining. TECHNICAL CONDITION The machine is in very good technical condition Operated in clean production environment Fully enclosed work area for safety and noise reduction Regularly serviced.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 78,000 h, functionality: fully functional, machine/vehicle number: 216028, Sale only within Germany CNC Grinding Center UW I D With 5 controlled axes: X, Y, Z, A, B And fully automatic grinding wheel changer Control system: NUM 1050 M with PC Center height: 195 mm Max. tool diameter: 250 mm Grinding table X-axis Longitudinal travel: 625 mm Usable table area: 900 mm x 185 mm Cross slide Z-axis Cross travel: 305 mm Vertical slide Y-axis Vertical stroke: 305 mm Grinding head B-axis Swivels 240° Grinding wheel mount: HSK-C50 Spindle speed: 2,000 – 23,000 rpm Workpiece carrier A-axis Kljdpfex Hwyhsx Amzsr Mount: ISO 50 Max. speed: 600 rpm A, X, Y, Z axes with direct measurement system B-axis with indirect measurement system Renishaw 3D measuring probe permanently mounted on grinding head Grinding wheel changer with 8 stations incl. 4 additional coolant nozzles Additional CNC-controlled slide unit (W-axis) Longitudinal travel: 380 mm Hydraulic vertical stroke: 40 mm Mounted on the grinding table For use with steady rest or tailstock 78,000 spindle hours 105,000 power-on hours Includes Kraft+Bauer fire extinguishing system Note: Another identical machine is also available for sale.

Condition: new, Year of construction: 2023, Extraction capacity of filter unit at spigot*: 2600 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 65 db(A) Dimensions L/W/H in mm: L 975 / W 508 /H 545 Colour: RAL 7035 Klodpfxsh Rdxnj Amzsr Weight: 90 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil contents) and smoke, for small to very large machine workrooms | Oil mist separator. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as Option and can be controlled, for example, with a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: good (used), Year of construction: 2004, IXION AUERBACH IA2 TLF-1200.4 Year of manufacture: 2004 Factory overhauled: 2023 CNC control: HEIDENHAIN 430M Kodeydmuujpfx Amzolr Travel X (table, longitudinal): 1,200 mm Travel Y (deep hole drilling-milling unit, vertical): 1,200 mm Travel Z (turret, horizontal): 700 mm Travel W (deep hole drilling-milling unit, horizontal): 1,200 mm A-axis (swivel of deep hole drilling-milling unit): +25°/-15° B-axis (NC rotary table): 360° NC rotary table with 5 T-slots: 1,000 x 1,000 mm Max. workpiece weight: 7,000 kg Rated drive power (S1 / S6): 12 / 18.5 kW Torque: 115 Nm Speed range: 60 - 6,000 rpm Max. drilling depth (in one pass): 1,200 mm (with 2 traveling steady rests) High-pressure coolant system for deep hole drilling oil: 100 bar & 42 l/min Tool changer for 24 tools With spindle air blast Max. tool length: 300 mm Max. tool weight: 3.5 kg Tool diameter Without adjacent free space: max. 90.0 mm With adjacent free space: max. 160.0 mm Equipment inside work area: - Fully enclosed working area with roof - Oil mist extraction - Chip conveyor Required floor space: 5,150 x 5,350 x 4,020 mm

Condition: excellent (used), Year of construction: 2013, operating hours: 1,169 h, functionality: fully functional, Ladies and Gentlemen, We offer you a very well equipped Schütte grinding machine. Kedpfx Amjva Dumozelr Please refer to the technical data sheet for a technical description.