Deep hole drilling machine / Retrofit 2023
IXION AUERBACH IA2 TLF-1200.4

Name: IXION AUERBACH IA2 TLF-1200.4
Brand: IXION AUERBACH
Availability: InStock

Year of construction

2004

Condition

Used

Location

Germany

Deep hole drilling machine / Retrofit 2023 IXION AUERBACH IA2 TLF-1200.4

Show map

Machine data

Machine type:: Deep hole drilling machine / Retrofit 2023

Manufacturer:: IXION AUERBACH

Model:: IA2 TLF-1200.4

Year of construction:: 2004

Condition:: good (used)

Price & Location

Location:: , Germany

Call

Details about the offer

Listing ID:: A21080592

Update:: 28.01.2026

Description

IXION AUERBACH IA2 TLF-1200.4

Year of manufacture: 2004
Factory overhauled: 2023
CNC control: HEIDENHAIN 430M
Travel X (table, longitudinal): 1,200 mm
Travel Y (deep hole drilling-milling unit, vertical): 1,200 mm
Travel Z (turret, horizontal): 700 mm
Travel W (deep hole drilling-milling unit, horizontal): 1,200 mm
A-axis (swivel of deep hole drilling-milling unit): +25°/-15°
B-axis (NC rotary table): 360°
NC rotary table with 5 T-slots: 1,000 x 1,000 mm
Max. workpiece weight: 7,000 kg
Rated drive power (S1 / S6): 12 / 18.5 kW
Torque: 115 Nm
Speed range: 60 - 6,000 rpm
Max. drilling depth (in one pass): 1,200 mm (with 2 traveling steady rests)
High-pressure coolant system for deep hole drilling oil: 100 bar & 42 l/min
Tool changer for 24 tools
With spindle air blast
Max. tool length: 300 mm
Max. tool weight: 3.5 kg
Tool diameter
Without adjacent free space: max. 90.0 mm
With adjacent free space: max. 160.0 mm
Equipment inside work area:
- Fully enclosed working area with roof
- Oil mist extraction
Lodpoydmuuofx Akqshf
- Chip conveyor
Required floor space: 5,150 x 5,350 x 4,020 mm

The listing was translated automatically. Translation errors are possible.

Seller

Last online: A week ago

Registered since: 2002

66 listings online

Call

Send inquiry

Telephone & Fax

+49 6486 ... show

Fax:

These listings may also fit your interest.

Listing

Machining Center - Vertical DECKEL MAHO DMC 635 V

Germany

7,963 km

Machining Center - Vertical
DECKEL MAHODMC 635 V

Call

Condition: used, Year of construction: 2007, Technical details: x-travel: 635 mm y-travel: 460 mm z-travel: 510 mm control: 3D Heidenhain i TNC 530 table-size: 790 x 560 mm table load capacity: 600 kg tool taper: SK 40 Revolution per minute: 20 - 12 000 U/min. tool changer with: 20 place spindle hours: 36.050 h operating hours - idle run: 91.000 h total power requirement: 13,9 kW Weight approx.: 3,6 t tool taper: SK 40 range of revolution per miute: 20-10.000 U/min Lhsdow A I Uuepfx Akqef Tool changer: 20-fach dimension machine xH: 3,0 x 2,0 x 2,15 m

See details

Listing

Table boring machine TOS INTOS Zebrak FNG30 CNC

Jasło

8,574 km

Table boring machine
TOS INTOS ZebrakFNG30 CNC

Call

Listing

Universal machining center Deckel Maho DMC 125 U hi-dyn

Haaksbergen

7,596 km

Universal machining center
Deckel MahoDMC 125 U hi-dyn

Call

Condition: excellent (used), Year of construction: 2002, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, workpiece height (max.): 1,230 mm, workpiece diameter (max.): 1,250 mm, spindle speed (min.): 18,000 rpm, spindle speed (max.): 18,000 rpm, Heidenhain iTNC 530 control Tool changer for 60 tools Automatic head +180/-7° stepless HSK A63 Number of pallets: 2 pcs Lhsdpfx Akew Ngipeqsf Pallet size: 1000*800 mm

See details

Listing

3D CNC CMM (tactile) Profitech Technologies Innometrik 123010

Saarbrücken

7,786 km

3D CNC CMM (tactile)
Profitech TechnologiesInnometrik 123010

Call

Condition: new, Year of construction: 2018, NEW PRODUCT at a special price Tactile coordinate measuring machine from Innometrik Measuring range 1200 x 3000 x 1000 Maximum workpiece weight: 1000 Kg Accuracy MPEE: 2.2 + L / 350 (in μm) Scale resolution: 0.1 / 0.5 in μm - Air bearings on all axes Linear speed: 300mm / s Volumetric speed: 520 mm / s Touch probe: Renishaw Tp200 incl. 3 modules (SF, HF, LF) and probe changer 3 compartment Lhodpfx Aedyl H Nokqsf Software: OptiCheck 4.5 & Virtual DMIS (separate partitions) Optionally Polyworks according to customer requirements -Incl. PC (Windows 7) Alternatively Windows 10 -Incl. 2 monitors -Incl. Mouse keyboard Picture: sister device

See details

Listing

Germany

7,694 km

Recoiler - mandrel 12,5 t
FROEHLING

Call

Listing

Turn-Mill Centre MORI SEIKI NLX 2500 SY/700

Spain

7,597 km

Turn-Mill Centre
MORI SEIKINLX 2500 SY/700

Call

Condition: ready for operation (used), Year of construction: 2010, General Data Measurements width 3056 mm Measurements depth 3994 mm Measurements height 2187 mm Machine weight 6360 kg Main Drive Spindle speed range 4000 Number of axis 5 Movement X-Axis Movement 260 mm X-Axis Rapid Traverse 30000 mm/min Y-Axis Movement ±50 mm Y-Axis Rapid Traverse 0000 mm/min Z-Axis Movement 795 mm Z-Axis Rapid Traverse 30000 mm/min B-Axis Movement 734 mm B-Axis Rapid Traverse 30000 mm/min Ljdpsx D Sc Nsfx Akqshf Workpiece Workpiece drm over bed 590 mm Workpiece drm over support 360 mm This 5-axis MORI SEIKI NLX 2500 SY/700 was manufactured in 2010, featuring a max swing over bed of 590 mm and a cutting length of 795 mm. It includes Y and C axes, a sub-spindle, and high-pressure coolant system. Capable of handling bar work up to 80 mm, it's equipped with a chip conveyor and automatic bar feeder. Consider the opportunity to buy this MORI SEIKI NLX 2500 SY/700 turn-mill centre. Contact us for more information about this machine. Application Types Turning

See details

Listing

Milling Machining Centers 5 Axis WEMAS VZG 65-5A (5-Achsen)

Dreieich

7,842 km

Milling Machining Centers 5 Axis
WEMASVZG 65-5A (5-Achsen)

Call

Condition: used, Year of construction: 2018, x-travel 620 mm y-travel 520 mm z-travel 460 mm c-axis 360 ° Ljdpfxoxap Eae Akqehf b-axis -50 / +110 ° distance spindle nose and table 170 - 630 mm CNC-control iTNC 640 HEIDENHAIN Table dimensions Ø 650 mm max. table load 500 kg spindle turning speed range 12.000 U/min drive capacity - spindle motor 15,5 / 33,0 kW rapid traverse 48 m/min tool change unit 48 Pos. SK 40 coolant IKZ 30 bar voltage 400 V total power requirement 35 kW weight of the machine ca. 10,0 t dimensions of the machine ca. 4,00 x 2,46 x 2,85 m chip conveyor 2,90 x 0,50 x 1,30 m coolant tank 2,30 x 1,70 x 0,45 m coolant pump 0,60 x 0,50 x 0,90 m Oil cooler 0,55 x 0,60 x 1,10 m 5-axis simultaneous machining center - Serial-No.: 9496-117 - Control ON: 10,137 h - Spindle ON: 3,380 h - Control: HEIDENHAIN iTNC 640 - electr. handwheel - IKZ 30 bar - chip conveyor

See details

Listing

Automatic Bandsaw Kasto KASTOtec A/AC/AM5

Germany

7,870 km

Automatic Bandsaw
KastoKASTOtec A/AC/AM5

Call

Year of construction: 2004, condition: ready for operation (used), A fully automatic Kasto band saw system is available. Cutting range at 90°: round material: 530mm, square material: 530mm/530mm, flat material: 530mm/640mm, saw blade length: 7675mm, saw blade width: 54mm, saw blade thickness: 1.6mm, cutting speed: 120m/min. Overall system dimensions X/Y/Z: approx. 5200mm/2700mm/2700mm, weight: approx. 6000kg. Including roller conveyors. Documentation available. On-site inspection is possible. Ledpfx Aksv S E Edsqjhf

See details

Listing

Band Saw - Automatic - Horizontal KASTO twinA5

Nürnberg

8,019 km

Band Saw - Automatic - Horizontal
KASTOtwinA5

Call

Condition: used, Year of construction: 2009, cutting diameter 15 - 560 mm 560 x 630 mm dimensions of saw-band 7.400 x 54 x 1,60 mm Lhodevxwkfspfx Akqef Control KASTO material feed - single 900 mm multiple feeding length max. 9.999 mm cutting length min. 6,00 mm sawing motor 5,50 kW cutting speed 13 - 127 m/min height of material-table 700 mm total power requirement 12,00 kW weight of the machine ca. 6,00 t dimensions of the machine ca. 3,70 x 2,50 x H2,50 m Automatic two-column band saw with KASTO Compact Control; frequency-controlled saw band drive; chip conveyor; infeed roller-conveyor electrically driven (6m), 3x roll-conveyor 1m and outfeed roller 2m; Machine can be inspected under power.

See details

Listing

Iszkaszentgyörgy

8,588 km

Wire cut EDM machine
ARISTECHCW30

Call

Condition: like new (used), Year of construction: 2008, operating hours: 1,120 h, Controller ARISTECH (similar as FANUC) Number of axes: 4 Table size 640 x 470 mm X Axis Travel 425 mm Y Axis Travel 300 mm Z Axis Travel 250 mm Max workpiece size 800 x 600 x 250 mm U Axis Available:standard Weight cca 3000 kg Dimensions LxWxH = 1860 x 2050 x 2100 mm The machine consist of following units 1. EDM machine 2. Controller cabinet 3. Water tank and pump 4. Water cooler 5. Transformer 6. Transformer Nr.2 (power supply) Ledpfxsvvl Uas Akqjhf The machine was barelly used. Still unter power. It will be due to company liquidation.

See details

Advertise here