Press brake

Safan CNCL-K 170 - 3100 TS1

Condition: good (used), Year of construction: 2002, Nette gebruikte kantbank van Safan Type CNCL K 170 3100 TS1 Safan TS1 besturing Capaciteit 3100 x 170 ton Y1, Y2, X, R, Z1 en Z2 CNC gestuurd CNC Bombering Itedpfx Acjwz I Eko Esp Wila New Standard gereedschapsklemming

Condition: good (used), Year of construction: 2012, •Euromac MTX Flex 12 1500/22/ 2500 •A lot of tools included. •Year of construction 2012 •Multitool 6 •Multitool 10 •CE Safety features •Table extensions for 4 meters •Vacuum system • X-axis 2500mm with positioning 10000mm •Y-axis 1500mm MTX flex 12 • 3 Autoindex stations D - 360° pragrammable • 3 Fixed stations D • 6 Fixed stations B with ACTIVE Die System • Direct DRIVE System •Automatic repositioning of the hydraulic plate clamps. • Standard 2 plate clamps • Simple system for loading plates. • Automatic lubrication of the multi-tool and tools • Movable control console • Machine software TPT (TOP PUNCH TOUCH) with 21.5 inch LED touch screen. • Table with brushes • Folding table at the front (L 850) • External cooling system • UPS system: protects the console PC against voltage drops and Isdpfx Aswk Ntuoc Eetp guarantees up to 30 minutes of power supply in the event of a power interruption. • Die holder 2 x D, 1 x C, 2 x and 1 x Adapter from B to A • Punch adapter: D/B, D/C, B/A. • Operating instructions (paper and electronic). • Preparation for online service (internet connection required). • USB memory stick. • Electrical preparation for the loading and unloading system.

Condition: good (used), Year of construction: 1997, machine/vehicle number: 887043, Offer 24557 Technical data: - max. working length 4060 mm - column clearance 3680 mm - max. pressing force 1700 kN - max. distance table / ram 385 mm - column projection 410 mm - ram stroke 215 mm Iedpfx Aou T Nknjc Eotp - stroke speeds - downward speed idle max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to. 11 mm/sec - Total drive power 30 kW - Space requirement approx. W 5600 x H 3000 x D 2400 mm - Weight approx. 18000 kg - with: - with 6-axis CNC control DELEM - Two-hand control panel with foot switch - Crowning device - Controlled back stop with height adjustment 5 - 860 mm - Hydraulic upper + lower tool clamping - Die table displacement pneumatically supported

Condition: good (used), Year of construction: 2004, overall weight: 40,000 kg, pressing force: 450 t, AXIAL 4100x450tn + Cybelec ModEva 10 + 5 axes (Y1, Y2, X, R, Z) + WILA cnc compensation table + WILA hydraulic punch and die clamp Bending length: 4.100mm Force: 450tn Cursa: 365mm Axes: 5 axes (Y1, Y2, X, R, Z) *Z-axis (double prismatic guide nipples) WILA hydraulic clamping of punch and die WILA cnc compensation table Trancha working speeds: Approach speed: 110mm/sec. Working speed: 8mm/sec. Up speed: 90mm/sec Distance between uprights: 3600mm Neckline: 410mm Opening between table and truss: 500mm Pit penetration: 975mm Cnc: Cybelec ModEva 10 (Control CPU New as of September 2023) Laser safety: DSP LASER - TX Weight: 40tn Iodpfx Asu Au U Tjc Eotp Motor power: 30KW

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system expansion available optionally External dimensions: Height 8,700 mm Width 3,500 mm Depth 1,580 mm 51 supports with a payload of 350 kg each In the clear usable dimensions: H = 255 mm W = 3,050 mm D = 520 mm Chain pitch 305 mm Isdped Spf Refx Ac Estp 51 galvanized intermediate shelves Total payload up to 19,000 kg Storage table at 990 mm above floor level with stainless steel worktop, 315 mm deep Color: gray Drive motor power: 1 x 3.8 kW / 400 volts Subject to errors and technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in Germany, Austria and other neighboring countries

Condition: used, Year of construction: 1998, pressure 175 t chamfer lenght 4050 mm Itedstv Rh Aepfx Ac Eep distance between columns 3050 mm throat 300 mm stroke 240 mm stroke speed - idle stroke downwards max. 140 mm/sec working feed max. 9 mm/sec stroke speed -return max. 130 mm/sec distance between table / ram min. 370 - max. 610 mm control CYBELEC DNC 880S total power requirement 15 kW weight of the machine ca. 15 t dimensions of the machine ca. 5,89 x 3,6 x 3,16 m Features: - Controlled axes: Y1, Y2, X, R - CNC crowning - CYBELEC DNC 880S control - Swivel control, front right - 4x manually adjustable stop fingers - Foot switch - 1 set of upper tools - 1 set of lower tools - 2x material support arms at the front - Side + rear protective device - Operating instructions

Condition: excellent (used), Year of construction: 2001, Technical data: Year of manufacture: 2001, service in 2024 Working length: 3100 mm Stand width: 2650 mm Pressing force: 300 tons CNC control: Robosoft BC55 touch graphics 2D Controlled axes: Y1 / Y2; X CNC table bending compensation Projection: 300 mm Stroke: 350 mm Motor power: 18 kW Dimensions (length x width x height): approx. 4200 x 2200 x 3700 mm Itedsvy H Iiepfx Ac Esp Weight: approx. 19 tons Accessories: various tools The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2007, Gebruikte 3 meter Safan E Brake Type: E Brake 100 3100 TS1 Capaciteit: 3100 x 100 ton Safan Touch screen besturing Y1, Y2 en X CNC gestuurd Handmatige R as (voorzijde) Itodpfxowmcz De Ac Ejp Euro/Amada gereedschapopspanning Bouwjaar: 2007 1 set gereedschap inbegrepen

Condition: good (used), Year of construction: 2003, Amada HFP 100-3L (long stroke) 8-axis press brake Year: 2003 Tonnage: 100 tons Max. Bending length: 3110 mm Standard stroke: 350 mm Approach speed: 100 mm/sec Bending speed: 10 mm/sec Return speed: 100 mm/sec Weight: 7100 kg Dimensions Machine length: 4498 mm Machine width: 2450 mm Beam width: 60 mm Distance between side frames: 2705 mm Machine height: 2860 mm Open height: 620 mm Itodpfevn S I Djx Ac Eop CNC control type: AMNC Display: Touchscreen Akas laser protection Controlled axes: 8 axes, Y1, Y2, X1, X2, R1, R2, Z1, Z2 Documentation available Digipro angle measuring system Supplied with 1 set of tools

Condition: used, No. 04485 Veneer press Ott JU 2513 Used Electrically heated heating plates Hydraulic pressing pressure Aluminum heating plates Plate dimensions 2550 x 1350 mm LW BUSSE heating plates renewed in 2019 and covered with Mylar film 4 hydraulic cylinders each 90 mm diameter Total pressing pressure 90 tons Specific pressing pressure 2.8 - 4.0 kg/cm2 Button control for closing / opening / stop Emergency stop rip cord Opening width 400 mm Total power 19 kW Stable construction with 3 longitudinal beams in the upper part of the press and 2 longitudinal beams in the press table Transport dimensions approx. 2900 x 1500 x 2000 mm LWH Weight approx. 4200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Itodpfx Acew Npbze Eop For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse