Press brake

SAFAN DNCS 150-3100

Year of construction: 2020, condition: refurbished (used), 2 semi-gantry cranes for indoor operation Rjdpfomdrt Sox Agljn expandable to full gantry crane span approx. 8.5 m hook paths approx. 6,0 m DEMAG monorail trolley Floor control system

Condition: good (used), Year of construction: 2001, Manufacturer: BEHRINGER Type: HBP 530 A Year of construction: 2001 Rjdpfx Agou U Narolen Specifications: Metric Metric US Standard Capacity 90° 530 x 530 ° Min, saw length 40 mm Max. Saw length 17 - 110 Saw power 12 kW Chip conveyor Yes Dimensions (estimate) length 4000 mm width 2250 mm height 3270 mm weight 4400 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 2002, From company liquidation: Redpfx Agst Iklkslsn Peddinghaus Peddimax 1002 Year of manufacture 2002 Max. Punching and shearing capacity: 1000 kN Punches 31 mm holes in 25 mm steel Shears on the flat steel shear to 500 mm up to a material thickness of 18 mm steel Contact length stop Many accessories (special punches) Special punching device SV 90 up to 90 mm holes Weight: approx. 3,000 kg

Condition: ready for operation (used), Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. On-site inspection is possible. Rsdpfjuqackox Aglsn

Year of construction: 1991, condition: good (used), machine/vehicle number: 07282, Offer 22336 Technical data: - max. working width 3030 mm - max. sheet thickness without bending 4 mm - max. sheet thickness with bending 3 mm - 3 driven rolls - roll diameter top / bottom 205 / 185 mm - working speed m/min - drive - brake motor 400 V / 7,5 kW - space requirement approx. W 5500 x D 1400 x H 1300 mm - weight approx. 4,7 t - with - bending Redjmdqllspfx Aglen - Rear roller inclinable, - hinged bearing for swinging out the top roller - extended roller ends for mounting of profile rollers - right + left rotation - separate control panel

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Round material shears Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm - Work table with stop for punching device 550 x 380 mm - Working height of the punching device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height of rectangular notcher 930 mm - approx. 21 different punching tools - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition Rsdporz Tutofx Aglsn

Year of construction: 2009, condition: refurbished (used), functionality: fully functional, This listing features a cooking kettle from the premium manufacturer Elro, model DGN3-EID-90-H. This is a top-of-the-line product in professional kitchen equipment. The high-quality kettle is equipped with the Elro Quick Cook Select control system, offering user-friendly operation. The unit is currently mounted on feet but can be converted at any time to a plinth version or wall-mounted setup. The cooking kettle has been inspected and serviced in our in-house specialist workshop. The kettle lid has been replaced by the ELRO factory service with a non-pressure lid. Please note: the appliance is fully functional but does not have a pressure cooking function! The following maintenance was carried out by the ELRO factory service: Replacement of the safety valve Replacement of O-rings in the drain tap Our used equipment service includes: 3-month warranty on all electrical components Branded premium equipment at fair prices Professional refurbishment, inspection, and cleaning Tested & fully functional – or your money back Flexible shipping or self-collection options Competent advice – before and after your purchase Provision of operating manuals, wiring diagrams & spare parts Safety inspection according to DGUV V3 Technical data: Dimensions (WxDxH): approx. 1400 x 800 x 700 mm Power supply: V: 400 / kW: 45.5 / Hz: 50-60 Weight: approx. 520 kg Type: DGN3-EID-90-H Serial No.: 75048 Capacity: 300 liters Year of manufacture: 2009 Condition: used, inspected, fully functional Additional features: Elro OCS (Quick COOK Select) Elro HPC (High Pressure Cleaning) Elro PMS (Power Management System) Elro drain tap Elro vacuum heating system Elro hygiene hinge Elro process status display Plinth version Operating modes: Boiling Pressure cooking Rsdpfx Agsq Tctbelen Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by prior agreement If you have any questions, need advice, or would like to view the item on-site, you can contact us by phone during our business hours: Monday to Friday, 09:00–13:00 and 14:00–17:00. Sale is subject exclusively to our general terms and conditions (GTC).

Condition: excellent (used), Year of construction: 2008, The condition of the machine is excellent, it has performed only 14078 operations. CNC controlled machine, designed for processing welded frames. Multiple use of the same time He works in a welding and cleaning line It does not take up additional space in the hall It can work in the line of frames, sashes or mixed All operations are performed during cooling: dehydration Redpfjm Ak R Uex Aglsn vents, grooves venting, holes in colored profiles drilling the frame for the post connector drilling holes for the hinge in door frames (x6) drilling holes for the hinge in the leaf (x2) The center has its own transport of frames from the welder to the cleaner PLC control, NC User-friendly visualization

Condition: good (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 778 F 319, Lazer Cutting Rodpemx Rrljfx Agljn Fabrikat: Prima Power Typ: Palatino 1530 Baujahr: 2012

Condition: used, Year of construction: 2004, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm number of spindle speeds: 63 - 3.150 1/min feed stepless: 12-3000 / 6-1500 (Z) mm/min quill stroke: 100 mm milling-head swivable +/-: 90° spindle taper ISO: SK 40 surface area: 630 x 400 mm total power requirement: 8 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2 x 1,9 x 1,95 m universal milling machine with point to point control, mechanical handwheels, swivel - rotary table (mech.) +-45°, Rsdpfxjk Hdu Ds Aglsn hydr. tool clamping, half cabin, coolant device, manuals (German language) *