Profile bending machines Sahinler HPK-50 2001

Sahinler HPK-50

Condition: new, Year of construction: 2026, neu 2026 090180 Iijdpfx Ajwiqm Tsbgsa prompt, Zwischenverkauf v Türkei 8300 € 160.19 € 1 50 mm 152 mm 162 mm 3 1.1 kW 4,5 m/min 60x10 mm / 600 mm; 20x10 100x15 mm / 600 mm; 50 x 35x35 mm / 600 mm; 15x15 35 mm / 600 mm; Dm. 20 mm 70x2 mm / 1200 mm; Dm. 25 70x30x3 mm / 1500 mm; 30x 50x50x3 mm / 1600 mm; 20x 50x50x6 mm / 600 mm; 30x3 50x50x6 mm / 900 mm; 30x3 810 mm 950 mm 1500 mm 500 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Condition: excellent (used), Technical Details: Working width: 3100 mm Maximum bending capacity: 16.0 mm Maximum pre-bending: 12.0 mm Top roll diameter: 300 mm Side roll diameter: 270 mm Ijdpfoxyvx Tox Abgoia All three rolls powered Hardened rolls Conical bending device by tilting of both side rolls Swiveling control panel with digital display Hydraulic drop end bearing Motor power: 7.5 kW Dimensions (L x W x H): approx. 5800 x 1700 x 1500 mm Net weight: approx. 8.5 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), Brand Ercolina Model CE40H3 Year of manufacture 2006 Hydraulic drive Iisdpfx Aew Hx Tvobgja Roller diameter Ø 165 mm Shaft Ø 40 mm Tube capacity (thin-walled) Ø 70x1.5 mm min. Ø 700 mm Tube capacity (thick-walled) Ø 2" x 3.2 mm min. Ø 450 mm Angle section capacity 50x50x6 mm min. Ø 400 mm Flat bar capacity 50x10 mm min. Ø 250 mm Flat bar capacity (hard edge) 100x15 mm min. Ø 250 mm Box section capacity 50x50x3 mm min. Ø 500 mm Shaft capacity Ø 35 mm min. Ø 250 mm Power 1.85 kW Bending speed 10 rpm.

Condition: new, functionality: fully functional, gearing type: automatic, fuel type: diesel, operation weight: 2,000 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.025 m³, Year of construction: 2025, operating hours: 5 h, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, NOW ONLY €13,500 NET – FOR A LIMITED TIME ONLY! 💥 ATTENTION! LIMITED OFFER FOR QUICK DECISION-MAKERS 💥 Are you looking for a compact, powerful, and immediately operational mini excavator? The HT20 PRO is the perfect choice for professionals who value performance, comfort, and reliability. ⭐ YOUR ADVANTAGES ✔ Genuine Kubota D902 engine – durable, economical, reliable ✔ Precise load-sensing hydraulics ✔ Comfort cab with air conditioning & heating Iiedpox Hvvhjfx Abgoa ✔ Adjustable undercarriage – ideal for tight construction sites ✔ Robust steel construction – built for daily use ⚠️ SPECIAL EDITION – THIS IS INCLUDED 👉 Included in the price: ✅ 1 x 50 cm digging bucket (standard bucket) – ready to use immediately ➕ ACCESSORIES & OPTIONS (AT ADDITIONAL COST) Configure your machine individually: ✔ Additional buckets ✔ Hydraulic quick coupler ✔ Auger (up to Ø 300 mm) ✔ Further attachments on request 👉 You choose – pay only for what you really need ⚙️ TECHNICAL DATA Kubota D902 diesel engine 3-cylinder Power: 11.8 kW Operating weight: 2,000 kg Transport length: 2,850 mm Width: 1,220 mm Height: 2,350 mm Maximum digging depth: 2,060 mm Maximum reach: 3,130 mm Maximum digging height: 2,875 mm 🚀 IMMEDIATELY AVAILABLE ✔ Machine in stock ✔ Ready for operation upon delivery ✔ Europe-wide delivery available ✔ Spare parts & service directly on site ✔ 12-month warranty 🔥 WHY THIS OFFER? ➡️ Premium machine at an unbeatable price ➡️ Maximum flexibility in configuration ➡️ No unnecessary extras – full cost control ⏳ ACT NOW – WHILE STOCKS LAST 💰 Special price: €13,500 net 📍 Location: Rheda-Wiedenbrück 👉 Enquire now and secure your machine before the offer ends!

Condition: used, total length: 1,330 mm, total width: 1,040 mm, total height: 1,150 mm, Empty weight: 1.800 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Shaft diameter [mm]: 85 - Capacity diameter round [mm]: 60 - Transport dimensions: 1330mm x 1040mm x 1150mm (l x w x h) Iijdpfx Absxuf Slsgea - Transport weight [kg]: 1800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Iiedpfx Aoh Ek Dajbgea Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Year of construction: 2012, - 3-axis CNC center SCM Pratix S - model PRATIX 12B from 2012. - Range X, Y, Z axes: 2500x1250x150+ mm - Number of tool spaces in the magazine: 8 Iiodpfx Aeuu Ntgjbgoa - Machine table: Raster aluminum table, 2 sections. - Control: PC control - Software: SCM NESTING, SCM XILOG MAESTRO - Serial no.: AH/115920 Number of milling axes: 1 Drilling unit: 1 - practically unused Maximum spindle speed: 24,000 rpm Tool holder: HSK-F63 Main engine: 6.6 kW Table measurements: 130 cm x 260 cm Portal construction: Machine with movable portal Vacuum pumps: 2 pcs. BECKER from 2012 - one placed outside, the other installed in the machine. Vacuum pump capacity m³/h: 240/280 m³/h. Interface for reading CAD format (.dxf) Security: Rejects Weight approx. 2,500 kg Length: 5,900 mm Width: 2,790 mm Height: 2,190 mm Automatic tool length measurement

Condition: good (used), Year of construction: 2008, machine/vehicle number: 6424102096, Offer No. 25101 Technical Data: - Cutting range at 90° round 400 mm - flat W 400 x H 400 mm - Cutting range at 45° flat W 320 x H 320 mm - Cutting range at 60° flat W 210 x H 320 mm - Material support height approx. 700 mm - Saw band dimensions 5090 x 34 x 1.1 mm - Cutting speed steplessly adjustable 17 - 90 m/min - Hydraulic lifting – lowering of the saw frame - Cutting pressure steplessly adjustable 0 - 10 m/min - Total drive power 400 V / 3.5 kW - Coolant system - Infeed – roller conveyor 7000 mm Iiedpfxjwpincs Abgea - Outfeed – roller conveyor with stop + digital display 4000 mm - Space requirement approx. W 2000 x H 1400 x D 2800 mm - Weight approx. 1200 kg

Year of construction: 1998, condition: good (used), machine/vehicle number: 0159488169537, Offer 23293 Technical data: - Pressure capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - stroke infinitely variable 0 to 28 mm - stroke rate 26 to 36 1/min - throat 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - weight approx. 1300 kg - with: - foot switch - grain search device, - support table with foldable stops W 1100 x D 850mm - shifting distance of the stops from the center of the punch Iedpfx Abspuy H Degoia - width between Li and Re approx. 470 mm x D 510 mm

Condition: like new (used), Year of construction: 2017, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 356801, arm reach: 706 mm, We only used the TIG welding robot for 2 months. The machine is in perfect condition. The extraction system was never in operation. The machine enclosure and welding table are included. The “Ready2_pilot” programming and material feed for welding can be retrofitted at any time. Iiedpfx Abjxw R Nnsgsa