SAndmaster

SANDMASTER FG2-20-2-9

Condition: good (used), Plant: REWA Chamber Filter Press used Type: 470-15-25K-HP Design: side rail guided Filter plate format: 470x470 mm Number of plates: 15 Filter plates: PP Filter cloths: optionally available in coordination with the medium Press capacity: approx. 57 dm3 Filter pressure: approx. 15 bar Material of parts in contact with the product: Flange, feed-throughs stainless steel, PP or rubberized Dusdpfx Ajqakbrsffer Material of parts not in contact with the product: Stainless steel Purchase or hire: Inspections of the systems by arrangement at our factory. Other: We can supply you with used equipment ready for operation or refurbished according to your wishes and requirements. Would you like to rent or buy this system? Please contact us, we are at your disposal.

Condition: used, Year of construction: 2014, operating hours: 87,419 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 20 rpm, input voltage: 400 V, controller manufacturer: Siemens 840d sl Operate, number of spindles: 1, rotary table diameter: 320 mm, spindle nose: HSK-A 63, tool diameter: 125 mm, tool length: 250 mm, tool weight: 8,000 g, operating hours of spindle: 20,657 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C22U 5-axis machining centre Siemens 840D sl Operate 55 tool positions HSK-A63 NC tilting rotary table SRT320 mm C-axis worm gear drive Single-sided drive A-axis Standard coolant system without through-spindle coolant (IKZ) Rear-mounted scraper belt conveyor External air blast Spindle centre air blast Dedsxxg D Repfx Affeur Chip flushing gun Oil mist extraction incl. post filter Automatic cabin door Manual cabin roof Electric thermal compensation Siemens Heidenhain touch probe

Condition: good (used), Year of construction: 2000, max. ram stroke 2 - 300 mm groove width 2 - 32 mm power capacity 8 kW no. of strokes 2 - 300 Hub/min throat ca. 300 mm Max. installation height ca. 450 mm automatic feeds 0,01 - 0,15 mm work speed 0 - 30 m/min return speed 30 m/min weight of the machine ca. 2,2 t dimensions of the machine ca. 2,5 x 1,5 x 2,2 m The BALZAT keyway jointing machine is characterised by the following advantages: - Infinitely variable adjustment of the jointing speed with constant return, even during the work process - Simple clamping of the workpieces with standard clamping devices, without additional tool holders - Extreme dimensional accuracy thanks to self-centring, centrally arranged blade holders - Feed rate can be changed during the programme sequence - Machine base is also a container for cutting oil Dsdpeuayibjfx Affeur - all components are easily accessible and replaceable

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of Dodpfx Afofg Rlcefour pieces program.

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. Djdpfx Afjpugwiefour The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: good (used), machine/vehicle number: RTT HAU T3, Used rotary table polishing machine Manufacturer: Hau Rotary table with 6 working spindles and 3 polishing stations with high pressure guns, 5,5 kW motors, Dedpfxoh Ug Ulj Affour control cabinet

Condition: new, Year of construction: 2024, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID GBS 218 Eco AutoCut double mitre bandsaw Speed: 25-80 m/min - Mitre left 60° - For cutting steel, stainless steel and aluminum profiles - Quick-clamping vice with quick-clamping device a. - Built-in blade tension control b. - Saw blade guide made of carbide c. - Electric automatic cooling system - Machine base (supplied disassembled) The AutoCut system consists of: - Hydraulic cylinder, feed control, spring assembly, limit switch and enables three work sequences: 1. automatic lowering of the saw frame via hydraulic cylinder with infinitely adjustable feed control valve and limit switch at the end of the cut 2. high-speed lowering of the saw frame from the rest position up to the workpiece, then switching to normal saw feed 3. manual operation - hydraulic cylinder works Duodpot I R Edjfx Affjr as a brake cylinder Saw blade dimensions: 2455x27x0.9mm Further accessories such as saw bands, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm Djdpsqpdkcsfx Affsur - Capacity: about 7,500 - 15,000 dowels/hour

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m Dujdpfx Aod Iipxsffor SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height button - Ball bearing turntable - hydraulic Vice, laterally displaceable - Massive, large material support - Automatic cooling

Condition: excellent (used), Year of construction: 2002, Deckel Maho DMU 80 P-Hi Dyn 5-Axis CNC Machining Center Year of manufacture: 2002 Duedpfox Dlf Rox Affor Control: Heidenhain 430 X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 600 mm B-Axis: Automatic swivel milling head C-Axis: NC rotary table: 900x630 mm Workpiece weight: 800 kg Tool holder: SK40 Tool changer: 60 positions Accessories: Chip conveyor High-pressure coolant 40 bar (IKZ) Handwheel Heidenhain TS 642 probe