Belt Grinding Machine

SCANTOOL 75 - 2000

Condition: new, Industrial belt sander Scantool 75 x 2000 sanding belt 75 x 2000 mm Working width: - 75 mm Engine: - 4,1 HP Speed: - 34 m/sec Table height: - 475 to 1240 mm grinding belt dimensions: - 75 x 2000 mm surface grinding surface: - 530 mm Weight: - 76 kg The industrial belt grinder models Scantool 75 x 2000 and 150 x 2000 are powerful quality machines, built according to the strictest environmental and safety regulations. The belt grinders are equipped as standard with motor brake, adjustable working height, eye protection, angle stop and motor protection switch with Zero-voltage release built. The low-noise machine with CE mark is ideal for grinding all metals. Motor protection switch with zero voltage release Separate emergency stop Motor Brake Adjustable angular stop Eye protection The infinitely variable working height enables an ergonomically correct working position Lrsdpfx Aaed Dw Ncjxji Perfect construction for fast, effective and safe grinding Self-adjusting strap tension Danish top quality

Condition: excellent (used), The fully hydraulic production rapid-frame bandsaw features a universal hydraulic system for either exclusive or alternating cutting of thin- and thick-walled profiles as well as solid material, without the need to change the saw blade, using a standard tooth pitch of 3 or 4 teeth per inch. It is equipped with a pre-tensioned bow guide, enclosed oil hydraulics, three-position pivot bearing, separate coolant system, infinitely adjustable hydraulic cutting pressure, lift-off movement, accelerated return stroke, and comes standard with a continuously adjustable mitre device. Rapid traverse for saw bow lifting. The oscillating vice ensures optimal use of the saw blade. Longitudinal guide with ground and hardened guide rails transfers cutting pressure forces to the saw bow. Automatic end-stop shutdown. Push-button controls for ON, OFF, and rapid traverse lifting of the saw bow. Lrodpfx Aoxdwbkeaxei Manufacturer: KASTO Model: Metal Frame Bandsaw Machine type: PSB 280 U Drive power: 2.2 kW Stroke rates: 40/51/64/80/102/128 per min Cutting speeds: 11/14/19/22/28/38 m/min Universal hydraulics: standard Saw feed: Hydraulic Round cutting capacity: 280 mm Flat cutting capacity: 280 x 150 mm Mitre adjustment: 0–45° Material support height: 600 mm Weight: 650 kg Dimensions (L/W): 1500 x 600 mm Height: 1000 mm Saw blade dimensions: 450 x 40 x 2 mm Year of manufacture: 1988 Accessories: Coolant equipment, rapid traverse lowering, rapid traverse raising.

Condition: new, Industrial belt sander Scantool 75 x 2000 with integrated with double suction sanding belt 75 x 2000 mm Working width: - 75 mm Engine: - 4,1 HP Speed: - 34 m/sec Table height: - 475 to 1240 mm grinding belt dimensions: - 75 x 2000 mm surface grinding surface: - 530 mm Weight: - 100 kg The industrial belt grinder models Scantool with double extraction 75 x 2000 and 150 x 2000 are powerful quality machines, built according to the strictest environmental and safety regulations. The belt grinders are equipped as standard with motor brake, adjustable working height, eye protection, angle stop and motor protection switch with Zero-voltage release built. The low-noise machine with CE mark is ideal for grinding all metals. Motor protection switch with zero voltage release Separate emergency stop Motor Brake Adjustable angular stop Eye protection The infinitely variable working height enables an ergonomically correct working position Perfect construction for fast, effective and safe grinding Lrsdpfxoflt Ams Aaxoi Self-adjusting strap tension Danish top quality

Condition: new, Year of construction: 2025, pressing force: 100 t, stroke length: 400 mm, - Cylinder stroke 400 mm - Working width 1010 mm - Cylinder is movable - Can be operated electrically or manually - Pressure indicator - Emergency stop - 400V Lredpfx Aegp Dc Reaxji

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,274 h, number of axes: 6, pressing force: 326 t, This TRUMPF TruBend 7036 press brake was manufactured in 2014. It features a robust welded steel frame, electro-hydraulic top drive, and a 2D graphic control DA 69 system on a 10.4" color screen. The machine includes a CNC backgauge with 6 axes, hydraulic tool clamping, and CNC crowning for precise bending. Regularly serviced under a TRUMPF maintenance contract. Contact us for more information about this machine. • Free column clearance: 3680 mm • Installation height: 535 mm • Control system: 2d graphic control da 69 on windows with 10. 4" color screen • Electrical equipment: for three-phase current 400 v / 50 hz • The machine was serviced annually • Maintenance contract in place • Sturdy machine frame, welded all-steel construction • Press beam with high bending strength • Highly dynamic electromechanical direct drive (torque motor) • Electro-hydraulic top drive via proportional valves • Modern block hydraulics • Inductive length measuring system with temperature compensation • CNC backgauge system: 3-axis (X1, R1, Z1) and 6-axis options • Rack and pinion drive for X and R axes • Safe, front-accessible movement of stop fingers • Modufix top tool holder system, self-centering, manual clamping • Manual lower tool holder for EV dies, hardened, programmable offset • Integrated TRUMPF TASC 6000 control • Numerical workshop programming • Embedded Windows XPe operating system, Pentium M 1.1 GHz • 1 GB RAM Lredsx D D Hyopfx Aaxsi • 15-inch touchscreen • Network-enabled, teleservice via modem • Control cabinet climate control • Side-hinged safety doors and rear protective cover • 2-button foot switch for standing or seated operation • Rear work area LED lighting • Front work area LED lighting • Ergonomics package: comfortable front work surface and footrest • 2 storage brackets and 2 document trays • 24000 operating hours, brakes replaced 2024 • Tools maintenanced by TRUMPF, all in tolerance Additional equipment • Backgauge system with 5 axes and control cabinet climate control • Upper tool clamping: hydraulic and hardened • Lower tool clamping: hydraulic • CNC Crowning • BendGuard safety device • Foot switch • 2x support consoles, front • 1x bending aid with 900 mm parking position • Table extension for base table / additional table Technical Specification Bending Length 1020 mm

Condition: good (used), Year of construction: 1995, machine/vehicle number: 0523813, Offer 22728 Technical data: - Welding current max 335 A 35% ED Ledpfx Aorm Rpvjaxjri - max 260 A 60% ED - max 200 A 100% ED - Welding current is regulated in 36 fine stages from - 40 A - 335 A - 2 rollers wire feed - Roller wire feed infinitely variable - 2 cycle - 4 cycle regulation - Spot welding + interval welding - Air-cooled hosepack 4 running meters - Ground cable - pressure reducer - 400 V connection - Space requirement approx. W 550 x H 1000 x D 1000 mm - Weight approx. 150 kg

Condition: ready for operation (used), Year of construction: 1994, The press brake was manufactured in 1994. The working length is 1250 mm with a pressing force of 600 kN. Manufacturer: Micoda Working length: 1250 mm Lsdpfx Aep R Ircsaxeri Press force: 600 kN Weight: 4000 kg Power: 10 KW

Condition: excellent (used), Year of construction: 2012, Model Amada HFE M2 220t 4m, 8 axis Press Brake Year 2012 Tonnage 220 tonnes Max. Bend Length 4280 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 195L Motor Power Weight 17450 Kg Dimensions Machine Length 5070 mm Machine Depth 2075 mm Machine Height 3085 mm Distance Between Side Frames 3760mm Beam width 180 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm Lodpjv S U Izjfx Aaxeri

Condition: used, TECHNICAL DETAILS - Number of axes : 4 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 13 [mm] - Spindle speeds : 10'000 [rpm] COUNTER-SPINDLE - Z stroke : 140 [mm] GUIDE BUSH HOLDER 1 - Number of positions : 5 SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 3 x 380 [V] Lrodpfx Aaeuhaxxoxsi - Total installed power : 3.5 [kVA] EQUIPMENT - CNC : Fanuc 21iT - Parts catcher - Coolant tank * with high-pressure pump - Bar loader : LNS Alpha 320

Year of construction: 2014, condition: good (used), For sale is a Nilfisk compact safety industrial vacuum cleaner type CTS40 M Z22 400 C 4 kW 9 A 50 Hz 114 kg Ex-proof Lredshu Sf Hepfx Aaxji The vacuum cleaner is in good condition and ready for immediate use Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website