Frame Filter

Seitz Orion 60

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 70 bar, total height: 1,600 mm, total width: 800 mm, total length: 1,200 mm, temperature: 40 °C, operating pressure: 70 bar, noise level: 80 dB, Equipment: documentation/manual, rotational speed infinitely variable, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, approx. 15,000 L/day Potable Water Compact, fully automated reverse osmosis system for the production of hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, as well as small-scale industrial and utility operations. Technical Specifications Type: RO 510-DT2-15S Process: Reverse osmosis with Disc-Tube (DT) technology Permeate Output: Approx. 15,000 L/day (15 m³/day, depending on operating conditions) Feed Water: Seawater with high conductivity, approx. 55,000 µS/cm (high salinity) Permeate Quality: Drinking water, approx. 500 mg/L residual minerals (reference value) Recovery Rate: Approx. 30% (typical operating range) at 55,000 µS/cm conductivity Design Temperature: Approx. 25°C (Operating range: approx. −2 to 35°C) Process Technology & Configuration DT module with open feed channel – highly fouling-tolerant and fully cleanable Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) Chemical pre-treatment of feed water (acid dosing) generally not required Integrated rinsing and CIP (clean-in-place) function, PLC controlled Skid-mounted on stainless steel frame (AISI 316) High-pressure lines in stainless steel, low-pressure section in seawater-resistant plastic Pumped seawater components made from corrosion-resistant materials Operating & Energy Data Feed Water Flow: Approx. 1,000 L/h (reference value) RO Module Operating Pressure: High pressure range, designed for seawater desalination Power supply: 230 V, 50 Hz, single phase Connected load: Approx. 6 kW Gjdow Uf Ihjpfx Abboiu Control, Monitoring & Safety Local operator panel with integrated PLC control Monitoring of pressures, flows, conductivity, and operating hours Automatic shutdown in case of: - Insufficient feed pressure - Exceeding permissible operating pressure - Overpressure in permeate/concentrate lines - Exceeding defined conductivity limits (with automatic redirection to drain) Automatic “Stop & Rinse” function: Permeate flushes all seawater-contacted components on shutdown, reducing fouling during system standby Dimensions & Weight (Skid) L × W × H: Approx. 1,190 × 705 × 1,500 mm Weight: Approx. 530 kg (dry), approx. 605 kg (operating) Typical Applications Vessels, offshore platforms, ports Island and coastal supply Hotels, resorts, small industrial and utility operations Backup or peak load system for existing potable water production Additional technical documentation, photos, and information on scope of supply, pricing, and availability are available on request.

Condition: used, Year of construction: 2019, Overview The fill level inspection was built in 2019 by the German manufacturer Krones. The machine is currently not installed. Techn. details: Capacity: 50,000 bph Inspection via gamma ray emitter Krones Checkmat with push-off belt Gjdpfel Hxniox Abbsiu

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: STYLE CNC Machines, number of slots in tool magazine: 24, motor manufacturer: FANUC, Delivery after consultation Ref: 24F048 Year of construction: 2025 Condition: Showroom Specifications: - X-axis: 4000 mm - Y-axis: 1000 mm - Z-axis: 1000 mm - 26 kW (S6) main motor - 8000 rpm - BT-40 Godpfx Abow Ty S Sjbeiu - Automatic tool changer (24 positions) - Remote service (IXON) + network connection - Stronger coolant pump incl. spray gun - Upgraded to the latest STYLE software available

Condition: new, Year of construction: 2026, EF 600-NG bag-in-box dosing machine - for filling fruit juices, wine, vinegar, oil, etc. * High-quality stainless steel housing * Clear display with important information (current flow rate, remaining quantity, etc.) * preset quantities 1.5, 3, 5, 10, 20 liters * freely adjustable quantities * Cleaning program Gedpot U Iiyjfx Abbjiu * Extensive statistics * Only short downtime due to double holder * Compact design

Condition: good (used), Consisting of : Godpsib H Ddsfx Abbeiu - 3 tanks of 18000 litres - 3 tanks of 15300 litres - With walkways - Material: AISI 316 - Square discharge door (bottom) - Motorised mash discharge - Round manhole DN 400 (cylindrical part) - Total emptying: ball valve Ø 40 Friedrich no 2 - Partial drain: ball valve Ø 40 Friedrich no 2 - Taster - Recirculation with ball valve Ø 40 Friedrich no 2 - Dome Ø 400 mm, eccentric - Central dome DN 400, with a cylinder-grid fixed inside (to keep the mash cake wet) Dimensions : - 3 tanks 18000 litres: Ø 2000 mm, height 5600 mm - 3 tanks 15300 litres: Ø 2000 mm, height 4800 mm - Ground clearance: approx. 550 mm

Condition: ready for operation (used), The crown corks are fed manually into the chute, the machine places the crown cork on the bottle and presses it on. Gisdpfx Asfh Dlrsbbeu

Condition: used, Year of construction: 2002, Overview  This complete PET bottling line was manufactured between 1999 and 2007 by Krones (Germany) and other European suppliers. It is currently still in operation and used for filling carbonated water and lemonades into 1.5L PET bottles. The line has an output capacity of up to 16,000 bottles per hour. It has been regularly serviced and remains in good working order. Availability: end of August 2025. Technical data  Capacity: up to 16,000 bph (based on 1.5L PET bottles) Formats: 1.5L PET bottles (short neck and lid) Bottle material: PET Type of filler: Isobaric filler Year of manufacture: between 1999 and 2007 (various machines) Cap type: short neck Type of label: OPP (Contiroll) Scope of Delivery  1 x Blow molder CONTIFORM S16 | Krones | 2002 | incl. preform hopper & cooler Air conveyors from blowing to labeler & filler 1 x Labeler CONTIROLL | Krones | 2000 1 x Tribloc 77/88/11 MECAFILL isobaric filler | Krones | 2002 | incl. metal detector 1 x Mixer for carbonated water and drinks | ca. 2000 1 x Inkjet printer HITACHI RXS Conveyors between filler and tunnel 1 x Shrink tunnel VARIOPAC | Krones | 2007 | 45 packs/min 1 x Package holder applicator TWIN PACK MDE INOX | 2003 | single-row, 45 packs/min Transport of packages to palletizer 1 x Palletizer KETTNER KR51112 Pressant Universal | 1999 Pallet feeder with lift and transport 1 x Pallet ring wrapper ROBOPAC GENESIS | 2002 Godpfx Aewzvl Sebboiu

Condition: new, pressure 40 t throat 225 mm stroke 8-84 mm Table dimensions 580 x 450 mm ram adjustment 55 mm no. of strokes 130 Hub/min ram surface 185 x 180 mm ram hole 40 H7 mm hole in the table 210 x 170 mm T-slots 22 clamping plate 570 x 450 x 65 mm total power requirement 3,5 kW weight of the machine ca. 2,7 t Giedpfxeb U Hwtj Abbsu dimensions of the machine ca. 1,4 x 1,1 x 2,1 m

Condition: used, Technical details: lifting capacity in kg: 6600 kg fork length: 1.500 mm Lifting height: max. 3.700 mm track width: vorn: 1.800 mm track width: hinten: 1.400 mm axle distance: 2.200 mm voltage: 15 V / Hz Number of working hours: 416,0 (Stand: 28.07.2025) noch in Betrieb h weight approx.: 9.500 kg Gijdeu Nwl Uepfx Abbou dimensions L x W x H: 5,2 x 2,0 x 2,8 m - Mast = Duplex design - Fork carriage width max. 1800mm - Load center of gravity: at 600mm = 6,600kg; at 700mm = 6,105kg and at 800mm = 5,685kg - with coupling (pin Ø 40mm) *

Condition: like new (used), Year of construction: 2022, OEM – laser marker / engraving laser (diode pumped YAG-laser) The laser beam source was used for some time to generate plasma as part of a scientific project. Overall, however, it only has few operation time. Due to the short pulse length, this laser is also very suitable as an engraving laser Laser source of the complete system is a 10 Watt diode-pumped YAG-laser with 1064 nm wavelength. The working area is 100 x 100 mm, up to 300 x 300 mm is available as an option. No external cooling is necessary. Input-voltage: 110...240 VAC / 50 Hz. Applications are laser engraving and material ablation. The control software is installed on a PC, optionally also a Laptop can be used. The language of the software can be choosen (German, English). The laser is prepared for an integration into a ‘higher level system’, but can also be used as a 'stand alone' system. In this case interfaces for Interlock, emergency stop, laser control etc. are available. We are happy to support the customer according to his requirements. Gsdspyg N Aepfx Abbeiu