Vacuum tumbler with cooling system

Sind 2000 liters

Condition: like new (used), Vacuum tumbler SVT2000 Bedpfx Abewk H Tfe Uslf Sind Capacity: 2000 liters Speed frequency: 3 to 15 turns Voltage: 380V / 50Hz Electrical Power: 6.6 kW Dimensions: 270 x 154 x 222cm

Condition: ready for operation (used), Year of construction: 2006, A semi-automatic tray sealer Multivac is available. Cycle performance: 3-12 tray cycles/min, max. tray dimensions X/Y: 380mm/300mm, max. tray height: 110mm, max. film width: 450mm, max. film diameter: 250mm, machine dimensions X/Y/Z: approx. 1500mm/800mm/1650mm, weight: approx. 300kg. An on-site inspection is possible. Bsdpfxoxapg Re Ab Uslf

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: Bledewrp Emjpfx Ab Uef - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the las

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Bodoul T Icspfx Ab Uelf Machine dimensions in cm: Length: 300 Width: 180 Height: 200 Electric power: 7.5 kW

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 1,390 mm, travel distance Y-axis: 1,390 mm, table length: 2,030 mm, table width: 1,650 mm, warranty duration: 24 months, pump pressure: 4.138 bar, power: 30 kW (40.79 HP), 𝐃𝐢𝐞 𝐊𝐨𝐧𝐟𝐢𝐠𝐮𝐫𝐚𝐭𝐢𝐨𝐧 𝐝𝐞𝐫 𝐖𝐚𝐬𝐬𝐞𝐫𝐬𝐭𝐫𝐚𝐡𝐥𝐬𝐜𝐡𝐧𝐞𝐢𝐝𝐚𝐧𝐥𝐚𝐠𝐞 𝐢𝐬𝐭 𝐟𝐫𝐞𝐢 𝐰ä𝐡𝐥𝐛𝐚𝐫. 𝐌𝐞𝐥𝐝𝐞𝐧 𝐒𝐢𝐞 𝐬𝐢𝐜𝐡 𝐠𝐞𝐫𝐧𝐞 𝐮𝐧𝐝 𝐭𝐞𝐢𝐥𝐞𝐧 𝐒𝐢𝐞 𝐮𝐧𝐬 𝐈𝐡𝐫𝐞 𝐊𝐨𝐧𝐟𝐢𝐠𝐮𝐫𝐚𝐭𝐢𝐨𝐧𝐬𝐰ü𝐧𝐬𝐜𝐡𝐞 𝐦𝐢𝐭. 𝐙𝐮𝐦 𝐁𝐞𝐢𝐬𝐩𝐢𝐞𝐥: OMAX 5555 with 30 kW EnduroMAX pump and Tilt-A-JET cutting head - general overhaul with manufacturer certification and two-year warranty. OMAX waterjet cutting machines are ideal for pilot, one-off and small series production. Set-up times are significantly reduced compared to conventional manufacturing processes (e.g. no tool changes, no start hole drilling). The cost-cutting OMAX waterjet cutting machines are revolutionizing toolmaking as well as individual and series production, not including the numerous applications in the fields of mechanical and plant engineering. - 𝐀𝐮𝐟 𝐖𝐮𝐧𝐬𝐜𝐡 𝐅𝐢𝐧𝐚𝐧𝐳𝐢𝐞𝐫𝐮𝐧𝐠 𝐨𝐝𝐞𝐫 𝐋𝐞𝐚𝐬𝐢𝐧𝐠 𝐦ö𝐠𝐥𝐢𝐜𝐡 (𝐳.𝐁. 𝐛𝐢𝐬 𝐳𝐮 𝟖𝟔 𝐌𝐨𝐧𝐚𝐭𝐞𝐧) - up to 20 times faster - up to 50% more cost-efficient - accurate to ± 0.02mm - precise, clean, quiet, user-friendly - Software and machine components based on the latest OMAX technology Blsdpfjrm I Tqsx Ab Usf The Tilt-A-Jet cutting head automatically calculates and compensates for the natural taper. This results in a right-angled cutting edge. In addition, precise small angles can be produced in contours (toolmaking & press molds with small, precise initial angles, etc.). Prompt delivery can be arranged with INNOMAX AG.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, STALAM RF 20 KW ID.NO. 2795 Bledpfjucv Huex Ab Uef Stalam mod RF 20 KW microwave oven for frozen meat/fish products. Thaws the product effectively from the core outwards in a few minutes. Year mod 2020 the machine is in like new condition! Band width 140 cm. It is also possible to fry products such as bacon etc. with the machine. Dimensions 570 x 200 cm Height 340 cm.

Condition: new, Type: S 150 l Complete stainless steel Hopper capacity 150 liter Single working shaft with paddles Rotation of shaft in both directions Automatic stopping when cover is open Electric power: 2.2 kW Bodpoh Dp Sbsfx Ab Uslf Voltage: 380 V / 50 Hz Installation dimensions of machine in cm: Width: 100 Lenght: 60 Height: 100 Delivery time: after advanced payment, one working day

Condition: new, mileage: 22 km, fuel type: gasoline, axle configuration: 4x2, wheelbase: 3,250 mm, color: white, gearing type: mechanical, emission class: euro6, loading space length: 2,700 mm, loading space width: 1,800 mm, loading space height: 1,600 mm, Equipment: all wheel drive, cooling unit, PIAGGIO NP6 GPL DOPPIA RUOTA FURGONE ISOTERMICO CON GRUPPO REFRIGERANTE THERMO V 200 MAX (-20) STRADA/RETE NUOVO IN PRONTA CONSEGNA DA IMMATRICOLARE..... EXTERNAL DIMENSIONS 2700X1800X1600 INTERNAL DIMENSIONS 2540X1640X H 1440 VERSIONE START IN ALTRE SEDI DEL NOSTRO GRUPPO SIAMO CONCESSIONARI UFFICIALI MERCEDES-BENZ TRUCK SEDE NAPOLI (NA) DOMENICO ESPOSITO SEDE EBOLI (SA) CONCESSIONARIO UFFICIALE FORD TRUCK DOMENICO TRUCK SRL SEDE MARCIANISE (CE) SEDE NAPOLI (NA) Blsdpfx Aehrhvrsb Ujf SEDE EBOLI (SA) E CONCESSIONARIO UFFICIALE PIAGGIO COMMERCIAL DOMENICO ESPOSITO PROPONIAMO AMPIA SCELTA DI VEICOLI COMMERCIALI/INDUSTRIALI MULTIMARCHE USATI ( FIAT-HYUNDAI-DAF-MERCEDES BENZ-RENAULT-PEUGEOT-IVECO-MITSUBISHI-SCANIA-MAN-NISSAN-ISUZU-CA SSONE FISSO -GRU-RIBALTABILE-TELONATO-BOX-SPONDA CARICATRICE-CELLA FRIGO- COIBENTATO CON FRIGO- FURGONE) - POSSIBILITA' DI FINANZIAMENTI O LEASING PERSONALIZZATI IN SEDE. TEL. 0- ORARI APERTURA SEDE: LUNEDI-VENERDI 8:30/19:00 SABATO 08:30/14:00

Condition: like new (used), Vacuum filler VEMAG HP15 E TYPE 162 Continuous vacuum filler for straight filling and portioning Machine features: All-in-one 350 l hopper Standard double screw Standard double screw housing Graphical display of all settings, functions and fault information on TFT Color screen Program memory for 99 filling programs, Nominal output, total: 25 KW VEMAG lifting and tipping device for HPE with 250 l hopper Bjdpfsvx Nkkex Ab Ujlf - To fit standard trolley, 200 l capacity Machine dimensions in cm: Width: 140.0 Length: 240.0 Height: 215.0 Voltage: 380 V, 50 Hz Weight: 1450 kg

Condition: excellent (used), Year of construction: 2016, The NovaMax660 is the next generation of advanced slide-plate forming technology. This state-of-the-art servo driven system is suitable for forming a broad range of meat, poultry and non-meat products. It is commonly used by high volume processors forming popular products such as burger patties, pork sausage, chicken filets and chicken nuggets. The high throughput and reduced cost of ownership will assure a rapid return on your NovaMax660 investment. Bljdpfxjvl Evve Ab Uef Forming Style: Slide plate Typical Throughput*: 9,000 lbs/hour | 4,082 kgs/hour Line Width: 660 mm Speed: Standard speeds of 25-100 strokes/min (SX up to 120 strokes/min) Feed hopper Capacity: 1,100 lbs | 500 kg