Lunette

SMW AUTOBLOK SLU-3.2

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling Fsdpfouz If Nsx Am Eegi - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: good (used), Year of construction: 2011, operating hours: 19,000 h, functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 19,000 h, spindle nose: HSK 63, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, The machine will be available starting October 2026! Fgsdpfezx Ur Nox Am Eei

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, machine/vehicle number: SN3128158, turning diameter over cross slide: 533 mm, turning length: 572 mm, spindle bore: 63 mm, spindle speed (max.): 4,000 rpm, New condition + tooling + bar fender Fgodpjvwz T Usfx Am Eoi

Condition: used, centre distance 2.500 mm centre height 250 mm grinding wheel diameter 600 mm Total travel of the grinding support 320 mm spindle speeds 50 - 450 mm tool adaptor MK5 tail stock MK Cylindrical Grinding Machine | NAXOS-UNION - W-500 Fgjdpfxex Avtcs Am Eoi the cylindrical grinding machine was overhauled in 2017 by KPS-Schleiftechnik (RETROFIT – see order confirmation). The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: W-500-2500 | W500 | W 500 | W 500 2500

Condition: repair required (used), grinding diameter: 1,295 mm, grinding length: 4,276 mm, Looking for a high-precision cylindrical grinder for large workpieces? We have a Farrel 50 x 14 CNC Cylindrical Grinder available! This machine is ideal for industries requiring precise concave and convex grinding, ensuring superior accuracy and efficiency. Key Features: Concave grinding possible Covex grinding possible NUM 760 CNC Control Fixed steady rest 2 x  Stones and Flanches included Centre height: 647mm Grinding Ø: 1295mm Grinding length: 4267mm Grinding stone dimensions:914 x 152 mmmm Grinding stone speeds: 400 - 1200Rpm Fodpfx Aov Dia Aem Esgi Cooling system: Yes Length: 8500mm Width: 4500mm Height: 3200mm Weight: 78000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2005, condition: ready for operation (used), - USED - 6-AXIS SLIDING HEADSTOCK LATHE WITH BAR FEEDER MAX TURNING LENGTH: 320 mm MAX TURNING DIAMETER: 32 mm SPINDLE: 200-8000 rpm; 3,7 - 7,5 kW COUNTER SPINDLE: 200-7000 rpm; 1,5 - 2,7 kW X1-AXIS TRAVEL: 108 mm X2-AXIS TRAVEL: 228 mm Fgodpsvthv Iefx Am Eji Y1-AXIS TRAVEL: 275 mm Z1-AXIS TRAVEL: 325 mm Z2-AXIS TRAVEL: 130 mm Z3-AXIS TRAVEL: 410 mm RAPID FEEDS X-Y-Z: 20 m/min DRIVEN TURRET HEAD: 8 POS; 200 - 5000 rpm CONTROL UNIT: CINCOM SYSTEM M6D BAR FEEDER: IEMCA Mod. BOSS 332 EVOLUTION WEIGHT: 2850 Kg ACCESSORIES: PARTS CATCHER

Condition: used, grinding diameter / mm Fgedpfszgipxsx Am Eji grinding length 4000 mm swing diameter / mm

Condition: used, Year of construction: 2008, Technical details: turning diameter: 410 mm turning length: 500 mm control: Fanuc 21i TB standard turning diameter: 275 mm travel -x axis: 277 mm travel -y axis: 82 (±41) mm travel -z axis: 500 mm Spindle 1 RPM: 4500 1/min Spindle 1 Power: 18,5/18,5/15 kW Spindle 1 max. bar diameter: 65 mm turret stations / rotary tool stations: 12/12 Power rotary tools: 5,5 kW RPM of rotary tools: 6000 1/min Fgsdpfxjzd Un Ij Am Eei total power requirement: 39,2 kVA weight of the machine ca.: 6,2 t dimensions of the machine ca.: 3,1 x 2,0 x 2,2 m collet chuck: Hainbuch Accerories Chip conveyor Robot interface High precision Turning and Milling Centre with Y-axis. Machine was running with oil, not coolant. A fire extinguisher system is installed. *

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Max. machining length : 250 [mm] - Spindle speeds : 7000 [rpm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Spindle speeds : 7000 [rpm] - Number of guide bush holders : 2 GUIDE BUSH HOLDER 1 - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 5000 [rpm] GUIDE BUSH HOLDER 2 - Number of positions : 5 END ATTACHMENT - Number of positions : 5 SECONDARY OPERATION - Number of positions : 4 POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 2150x1500 [mm] - Machine height : 1800 [mm] - Machine weight : 2800 [kg] MACHINE HOURS - Number of working hours : 23884 [h] EQUIPMENT - CNC : Fanuc - 3 colors status lamp - Parts catcher - Ejection of workpiece - Coolant tank Fjdpfxoyhrlyo Am Esgi - Hydraulic bar-push brand/type : IEMCA BOSS 332

Condition: ready for operation (used), Year of construction: 2014, operating hours: 51,488 h, This Citizen CINCOM A32-VII CL swiss type turning machine was manufactured in 2014. It features a main spindle with a 32 mm capacity, a counter spindle, and a maximum turning length of 3000 mm. Equipped with a high-speed CHIDOMI system, it supports simultaneous movements across all axes and offers a feed rate up to 9,000 mm/min. Consider the opportunity to buy this Citizen CINCOM A32-VII CL swiss type turning machine. Contact us for more information about this machine. Fgsdpfjx D Nhpsx Am Esi Application Types Turning