3-jaw wedge bar chuck

SMW HG 200

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system Nodpfx Agovr Eh Eo Iswc • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2004, winch inkl. Nedpfx Aeq N E U Aeg Ijwc lifting capacity max. 2t. auf 2,7 Meter lifting capacity max. 1 Tonne auf 5,3 Mete Number of working hours 270 h electrical ja

Condition: new, pressure: 600bending length: 6050column width: 5100daylight: 680stroke lenght (max.): 455column throat depth: 450messurements (LxWxH): 7100x3275x3910weight approx.: 50.2004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 45Standard Equipment:KK Kletzer Europa Nedpfjd Ehh Rex Ag Ijwc We have developed a high-quality model specifically for the European market:The CNC press brake by KK Industries, made in Turkey. Model: KK Kletzer EUROPA XL The powerful EUROPA XL press brake stands out for its high precision, accuracy, and versatile offers a very large open height, resulting in a long cylinder stroke, and an extra-large throat depth to provide maximum flexibility during operations. We focus on delivering quality—reflected also in the control system:As standard, the machine comes equipped with the ESA S640 2D graphic controller. Additionally, the KKI EUROPA XL is equipped with CNC-controlled Y1, Y2, X, and R axes via the wning is also included and fully CNC-controlled through the same ESA S640. When it comes to tooling, we make no machine is fitted with premium top tools and dies from EUROSTAMP Italy. Naturally, a machine is only as good as the service behind t’s why we rely on highly qualified staff with many years of experience in CNC sheet metal processing. Technical Highlights: CNC axes: Y1, Y2, X, and R Controller: ESA S640 (2D graphical interface) Backgauge with double linear guides and ballscrews Motorized CNC-controlled crowning system Heavy-duty height adjustment with handwheel(from 175 tons: on linear guides) Laser safety system on the upper beam CE-compliant safety equipment Various options available Optional Controllers: ESA S640 – 15” 2D Touchscreen: ¤ 4,520.00 ESA 675 W – 21” 3D Touchscreen (Windows-based): ¤ 6,485.00 DELEM DA-66T – 17” 2D Touchscreen (Windows-based): ¤ 10,165.00 DELEM DA-69T – 17” 3D Touchscreen (Windows-based): ¤ 16,350.00

Year of construction: 1993, condition: ready for operation (used), machine/vehicle number: Seriennummer: 9302394, CNC-Control HATASTAR 2000 The press capacity is 500 t or 5000 kN In addition to the machine tools are available Switch Cabinet left Njdpfx Aged Egc Ae Iswc X1- + R-/ X2- + R-Axe on round guide Y1- + Y2-Axe hydraulic Upper tool clamping pneumatic sheet metal trace-device Second tow-hands Operation universal matrice 100x100x5'100 mm knife 280 x 5'100 mm Matrices-central plate, b = 111 mm

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). Nwjdpfxoq Nyzbj Ag Ioc 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Condition: new, Please read the technical specifications in full. If you are considering this machine as an investment, we kindly request your complete credentials, including a correct telephone number and email address, in order to submit an offer. Fiber Laser 30W Marking area: 200 x 200 mm Maximum workpiece size (WxHxD): 550 x 450 x 350 mm Laser type: Fiber 30 Watt Wavelength: 1064 nm Maximum marking speed: 7000 mm/sec Z-axis motorized H: 700 mm Repeatability/lens: +/- 0.001 mm Minimum line thickness: approx. 0.01 mm Power supply: 240 V / 50 Hz External dimensions: 110 x 80 x 200 cm Front door: manual Including software and PC Nwjdpjru E Svefx Ag Ioc Can be demonstrated under power on-site Price net, plus VAT

Condition: used, Year of construction: 1996, spindle passage 80 mm Nodpfexbtqvjx Ag Ijwc max. turning diameter 395 mm Max. Turning length 750 mm control System TX 8H max. Spindle speed 3.150 U/min. CNC lathe | TRAUB - TNA 400 The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA400 | TNA-400

Condition: good (used), Year of construction: 2001, functionality: fully functional, Year of construction 2001 Mazatrol PC Fusion 640 M Travels: X-axis: 1,660 mm Nwedjr Dr Ifepfx Ag Iec Y-axis: 510 mm Z-axis: 510 mm Table size: 2,000 mm x 510 mm Spindle motor AC 18.5 kW Max. Spindle speed 12,000 rpm Tool changer with 30 tool positions Tool holder SK-40, DIN69871 Rapid traverse X/Y/Z 36 m/min Automatic tool length measurement Cooling through the spindle Chip conveyor, ejection on the right Renishaw OMP60 measuring probe CE mark

Condition: used, Year of construction: 2001, turning diameter 340 mm turning length 750 mm control SYSTEM TX 8H spindle passage 80 mm swing over plan sled 530 mm greates pass round over bed 665 mm turning speed range - main spindle 3.150 min/-1 drive capacity - main spindle 22 kW number of tool places 12 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Price per unit. Machine 1: - Images 1-5 - Operating hours approx. 55,790 h Machine 2: - Images 6-10 - Operating hours approx. 54,347 h Nwedexwdw Espfx Ag Ijc Technical Features & Accessories: - Y-axis - Accessory package with rigid and driven tool holders - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2011, X-Axis: 2032 mm Y-Axis: 660 mm Z-Axis: 610 mm spindle speed: 12.000 U/min. with internal coolant power: 18 kW tool holder: SK 40 Nwodpfx Ajmn If Dog Isc 40 places table load: 2.700 kg machine weight: 18.000 kg operating hours: 11.417 hrs spindel hours: app. 5.000 hrs. (maximum) spindle changed in year 2020 - Technical error and prior sale is reserved. -