Screen printing machine

SPS Vitessa Star G2

Condition: excellent (used), Year of construction: 2007, SPS Vitessa Star G2 Year: 2007 Maximum format: 75 x 105 cm Minimum format: 32 x 44 cm Maximum speed: 4000 sheets/hour Godpfx Asz Ad A Eel Uebu Dryer In production Available immediately

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: Gsdpjyx Uy Ajfx Al Uobu • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: excellent (used), machine/vehicle number: 3.278-870805-1, Part No.: 42.35.53 Technical data and description: see pictures Gbedpfx Aloh Eii Ts Ueu

Condition: used, Letter Press Zylidner DIE Cutter Johannisberg 104 Buchdruckzylinder / Letter Press Zylidner DIE Cutter Johannisberg 104 Year 1966 - Serial-No. 2153801 Size min. 360 x 520mm - max. 720 x 1020mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Gbjdpfx Aloycrz Dj Usu Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 1993, condition: good (used), ROTOFLEX VLI 330 INSPECTION – SLITTER – REWINDER Machine information: Rotoflex products are proven in practical applications with self-adhesive labels, processing, blister foils, and all kinds of paper. This professional and heavy duty die-cutter with slitter/rewinder and label checking will rewind rolls in a perfect register with a max. diameter of 700 mms and a max. width of 330 mms into smaller sized rolls. During the process the labels can be checked for quality and missing labels. Specifications:  Max. web width: 330 mms  Roll diameter: unwind: 700 mms / rewind: 400 mms Gsdpfxevwkhno Al Uebu  Shaft diameter: unwind: 76 mms / rewind: 76 mms  Max. speed: 230 m/min.  Slitters  Rewinders  Splice table

Condition: good (used), Year of construction: 1996, GALLUS Arsoma EM 280-8 Colour Flexo Printing Press Model: EM280 Year of manufacture: 1996 Configuration: • 8 flexo printing units • 8 hot air dryers • GEW UV curing system (1x) • Turn bar (web turning device) • Sheet delivery (stream delivery) • BST Powerscope 4000 web inspection system Technical Data (approx.): • Max. web width: 280 mm • Print width: approx. 260–270 mm • Repeat length: approx. 250 – 520 mm • Unwinder: max. roll diameter approx. 800–1000 mm • Rewinder: max. roll diameter approx. 800–1000 mm • Mechanical speed: up to approx. 120 m/min • Substrate range: self-adhesive labels, paper, film and flexible packaging materials Gbjdpfoy A Nhiox Al Usu The machine offers a robust and proven solution for label production, providing high flexibility due to the combination of conventional drying and UV curing systems. This enables the processing of a wide range of materials and applications. A key advantage of this press is the included tooling package, which significantly reduces the need for additional investment and allows for immediate production start-up. Scope of delivery includes: • Printing cylinders • Anilox rollers • Magnetic cylinders This added value ensures high versatility and cost-efficiency for future production needs.

Condition: excellent (used), Year of construction: 2015, Robopac Athena Combi 5545 automatic shrink film wrapping machine The Athena Combi automatic shrink wrapping machine is based on technologies of high-end industrial machines. Due to continuous product development and research, Athena Combi provides great performance, versatility, and user-friendly interface. Because of the outstanding adaptability and accuracy of the machine, makes it possible to use high range of materials for shrink filming. The equipment meets the most stringent safety standards as well. Gsdpjv D Eziofx Al Uebu Manufacturer: Robopac Model: Athena Combi 5545 Year: 2015 Sealing bar dimensions LxW: 550x450 mm Max. product height: 120 mm Min. Product dimensions LxWxH: 50x20x20 mm Capacity: 30-35 packages/minute Max. product weight: 120 kg. Power: 400V / 12kW / 50-60Hz Machine Dimensions LxWxH: 2.700x1.200x1.500 mm Machine Weight: 600 kg.

Condition: ready for operation (used), Konica Minolta Accurio Press C 3080 with only 830,000 copies, in perfect condition, tested and ready to print! Equipment: FS 532 PI 502 RU 518 m PF 707 m Sd513/513f IC 605 As an experienced retailer of used copiers, we have developed considerable expertise in packing and pallet shipping, to ensure that our customers receive machines in perfect condition. We ship copiers that originate from and have been maintained by Konica Minolta France. If you have any questions, please do not hesitate to ask. Our company offers the widest range of Konica Minolta production copiers and handles worldwide deliveries upon request. Gbedpfx Aleznufzs Uou Please do not hesitate to contact us for further information.

Condition: ready for operation (used), Year of construction: 1985, max web width 1900 mm Gbsdow Nvkiopfx Al Uou

Condition: used, The Heidelberg MO Numbering & Perforating Unit is a machine with a format of 480 x 650 mm, currently located in Germany. It is equipped with 1 inking unit, 2 linear perforating arms, 2 mounting rings, and 1 numbering shaft. Format: 480 x 650 mm Equipment: Godpfx Ajvfxqgjl Uebu 1 X Inking Unit 1 X Numbering Shaft 2 X Mounting Rings 2 X Linear Perforating Arms