Mobile Folding Knife

Stahl VFZ 52

Condition: used, Year of construction: 1997, machine/vehicle number: 97989, Schwertfalzwerk - Mobile Folding Knife Stahl VFZ 52.DFour-directional folding unit - Vierbruchfalzwerk Year 1997 - Serial-No. 97989/97-255056 Sheet Size min 120 x 100mm - max. 520 x 360mm Speed max. 160 m/min. Cycle Rate max. 30000cycle/hour Infeed high 515 - 915mm Nkjdpfx Aell A Tiofzjt Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2005, Saddle stitcher Heidelberg Stitchmaster ST 400 Year 2005 Operation / Control - Colour monitor Feeders - Number of chain stations: 9 - Horizontal signature feeders: 2 x TAL 400 - Vertical signature feeders: 6 x TAS 400 - Cover feeder: UFA 400 - Excluding pump(s) Stitching unit Heidelberg Stitchmaster ST 400 - Thickness control - Stitching heads: 2 - Delivery to the left - Reject gate, for incomplete products Trimmer Heidelberg TR 400 - Sets of knives: 2 Delivery Heidelberg CHA - Compensating stacker Njdpfx Afoh E Ewdozskt - Delivery to the left

Condition: used, Year of construction: 2001, functionality: unexamined, machine/vehicle number: RV014301, Year: 2001 Maximum sheet size: 1050 x 750 mm Minimum sheet size: 420 x 297 mm Maximum printing size: 1050 x 730 mm Sheet thickness: 0.075 - 0.8 mm Maximum feeder height: 675 mm Maximum feeder capacity: 600 kg Feeder speed: 400 - 3,000 sheets/hour Screen frame outer dimensions: 1300 x 1170 mm UV dryer Nsdpfoxy E Dxox Afzjkt Equipped with: - Stream Feeder - Pull Side Lays - Suction Feed Belt - Deep Pile Delivery - Natgraph 2-lamp UV dryer with hot air module - Trumax Hyperstack Technical specifications: Maximum mechanical speed: 1,000 - 3,000 sheets/hour Maximum sheet size: 1,020 x 720 mm Minimum sheet size: 560 x 370 mm Printing speed (IPH): 900 ～ 3,300 Print thickness: 0.1 ～ 0.8 mm

Condition: good (used), Year of construction: 1998, Polar Mohr 92 E Nkedoxvn Huepfx Afzst Year of manufacture: 1998 Program, air table, side table left + right 2 blades, complete documentation, tools

Condition: used, Year of construction: 1991, machine/vehicle number: 6172025, Palettenheber mit Wanne / Pile Hoists - Stack Lift Polar L-1000-W-3Baujahr / Year 1991 - Serial-No. 6172025 Format / Size max. 1100 x 750mm Hebekapazität / Loading capacity max. 1000KG Hubhöhe / Lifting height max. 1400mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Nksdpfsn Aw Ugox Afzst On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2004, functionality: fully functional, Single-clamp hotmelt perfect binder complete with: automatic cover feeder Njdpfoxdm Exex Afzekt

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Nksdpfevwlqqox Afzst Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 1980, condition: good (used), SHIKI model PC 30, year 1980, 1x letterpress (2 colors); laminating unit; punching unit; longitudinal cut, 2 hot foil plates, in a good condition, immediately available Nkodpfx Ash I D Dnjfzst

Year of construction: 2022, condition: new, Suction belt with two suction belts Vacuum individually adjustable Nedpfjch Hcajx Afzekt Speed ​​up to 160m / min Infinitely variable speed Height adjustable also available with other lengths Inkjet base

Condition: good (used), Schmedt PraLeg HHS 1815 XL Case in machine Machine in perfect condition, purchased from the national library. Practically unused. The machine suspends the book block in a prepared hard cover. Nkjdpfx Aowud S Tjfzst Two gluers, smooth adjustment of glue thickness. The machine has full documentation with a CE certificate. Format: Block height: 80 – 440 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Efficiency approx. 200 – 300 pcs/h Power supply 230V Weight 300 kg