Optimization cross cut line

STROMAB CAT 1

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet Hnsdpfx Abjwvqklsvon • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 2021, operating hours: 9,500 h, functionality: fully functional, machine/vehicle number: 3284, Standard version of RUF Lignum R2 with outfeed channels, el.motor 22 kW, briquette sizes 150x60 mm Hsdpfxsyyl Sro Abvjnn capacity up 500 kg/h

Condition: new, Year of construction: 2026, 10T Ramp, Usable Internal Width 1.7m – TM-GROUP, the Best Choice on the Market ✅ Specifications: - Manufacturer: TM-GROUP - Maximum Load Capacity: 10 tons - Internal Ramp Width: 1700 cm - Reinforced side railings on both sides - Ramp rollers for easy movement - Central ramp handle for forklift repositioning - Adjustable slope and flap height - Dual reinforced ramp supports - Moving parts equipped with grease fittings - Ramp also equipped with a winch - ELECTRIC and manual ramp height control ✅ Ramp Surface Grating: Hodpfewa Nr Nsx Abvenn Grating with anti-slip grooves. Safe and secure surface. Both forklifts and pedestrian movement enjoy the best possible grip and solid support. Competitors typically offer ramps with a metal sheet covered with mesh. Our product features grooved grating – a much more durable solution that prevents dirt from staying on the ramp and ensures the forklift doesn't slip. ✅ Forklift Mount – Installable on Both Sides: Convenient and quick forklift attachment allows for ramp transport in all directions. The specially designed handle enables maneuvering the ramp even in tight spaces. ✅ Chain for Connecting to TIR Truck, Railway Car, or Fixed Warehouse Dock: A solid steel chain is another strength of our ramp, providing additional safety by preventing the ramp from shifting during loading operations. ✅ Sturdy Side Railings: Safety railing with the option to detach and install a frame/roof structure (roof is optional). ✅ Electric Height Adjustment Control: Smooth electro-hydraulic drive powered by a high-end pump. The pump requires only 230V, making it usable with a standard power outlet. ✅ Dual-Action Manual Pump: Hydraulic pump for height adjustment in case electro-hydraulic power is unavailable – dual lifting mechanism. This is an ideal solution for working in all conditions. ⭐️ We Offer the Following Variants: ⭐️ Driveway widths: 1700 cm, 2000 cm, and 2500 cm – Standard, Premium, and Premium Plus. Mobile ramps with load capacities of 10 tons, 15 tons, 20 tons, and 25 tons. Ramp grating thickness: 3–5 cm. Colors: red, blue, black, and green (custom colors available on request) Mobile ramp with tarpaulin cover. As a manufacturer, we can produce ramps tailored to special, individual orders – in different sizes, load capacities, and configurations. Need a custom solution you can’t find anywhere else? Contact our specialist. Tags: Loading ramp, unloading ramp, loading dock, mobile ramp, loading bay, transfer dock, mobile loading dock, mobile loading ramp.

Condition: like new (used), functionality: fully functional, THCIKNESS PLANER model MARTIN T 44 second hand machine CE mark : Yes working conditions : Excellent technical details : useful working width mm. 630 maximum working height mm. 250 maximum removal mm. 8 n.2 feed speed mt./min. 6 / 12 motorized table positioning with digital reading n.4 knives "Tersa" Hjdpfoyml E Dex Abvjnn main motor power Hp 7,5 net weight kg. 1115 volt. 380/50

Condition: excellent (used), Year of construction: 2018, Weinig Powermat 700 Year of manufacture: 2018 Hnodpfx Ajyg Hfljbvon Planing width: 230 mm Planing height: 160 mm Infeed table length: 2,500 mm Feed rate: 40 m/min Feed motor: 7 kW Table surface treatment: Marathon coating (hardened, with exclusive infeed table and special plates) Driven roller in the table with a width of 200 mm Memory Plus system for 500 profiles Spindle arrangement: Bottom: 11 kW Right: 7.5 kW Left: 7.5 kW Top: 15 kW Top: 15 kW Bottom: 11 kW The machine is in very good condition.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop Hodoy D A Swepfx Abvsnn - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, Year of construction: 2012, operating hours: 926 h, total height: 1,800 mm, total length: 11,250 mm, total width: 900 mm, Colour: Grey Weight: 1.500 kg Price: On request - Year: 2012 - Documentation available: No - CE marking present: Yes - CE certificate present: No Hedpfx Abjyna Ezjvsnn - Serial number: 546324 - Operating hours: 926 - Main motor power [kW]: 7.5 - Max. saw length [mm]: 7209 - Max. saw width [mm]: 300 - Max. saw blade diameter [mm]: 500 - Arbor saw blade diameter [mm]: 85 - Input table length [mm]: 7850 - Output table length [mm]: 2400 - Options: Automatic pusher system - Voltage [V]: 400 - Current consumption [A]: 22 - Fuse [A]: 25 - Power [kW]: 11.0 - Transport dimensions: 11250mm x 900mm x 1800mm (l x w x h) - Transport weight [kg]: 1500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2024, Maximize Profit with TRV 1200L and TRV 1600L: From Sawmill to Firewood TRV 1200L Ø550: Efficiency and Speed for Continuous Cutting Optimize waste management and turn production scraps into immediate economic value! The TRV 1200L Ø550, with its advanced design, is the ideal solution for sawmills needing to dispose of large amounts of multilaminate trims and log side sections. The result? A continuous and automated disposal process that converts waste into high-quality firewood. Key Features: Simplified handling: randomly load trims and waste onto the low-wear conveyor/roller VV. Smart clamping system: innovative technology allows processing of overlapping pieces of different shapes and thicknesses. Hnodpfev Ip T Rox Abvjn Advanced precision: PLC-automated cutting system with timed length control of trimmed pieces. Independent sectors: equipped with 5 sectors, each with its own pneumatic cylinder and shock absorbers for maximum stability. Enhanced Safety: Advanced protection system: access door to moving parts with forced-lock safety micro-switch. Sealed, non-duplicable security key for exclusive access. Protective tunnel with sealed key and reinforced blade guard for superior safety. Rapid blade motor stop (

Condition: ready for operation (used), Year of construction: 1981, WEINIG Hydromat H25R, S/N 2603-624, year of manufacture 1981, with walk-in acoustic enclosure KASCHWIG – ALMOST NEW from 2017 • Short infeed table with heavy-duty 6-roller infeed 1st spindle bottom 11.0 kW 2nd spindle right 11.0 kW 3rd spindle left 11.0 kW 4th spindle top 15.0 kW 5th spindle bottom 11.0 kW 6th spindle bottom 11.0 kW • Hydraulic feed 6-60 m/min. • Feed motor 22.0 kW • 4x powered table rollers • Spindle diameter 50 mm • Automatic table lubrication • Spindles 1 + 4 + 5 + 6 with counter-bearings • Spindles 1 + 4 with straight jointer • Feed rollers 170 mm Hsdpfx Abstkt Tpsvjnn • 4 pcs. hydro planer heads 150 mm • 6 pcs. hydro planer heads 250 mm • Extraction hood above the machine

Year of construction: 2019, condition: as good as new (ex-display), Aluminum flat conveyor including 4 suspension points Dim: 3000 + 520 x 105mm Conveyor belt width 400mm PVC conveyor belt incl. Studs and wave edge * optional with magnetic deflection roller at the end of the conveyor belt. * optionally with substructure * Special designs in all versions possible. Hsdpfx Absd Ra Ttevenn