Double spindle 5 - axis machining center

SW Schwäbische Werkzeugmaschinen BAW 06 - 22

Condition: good (used), Year of construction: 2020, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 2080594, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, operating hours of spindle: 9,500 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, CNC Control SIEMENS 840D SL Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (grounded) Network type: TN-S or TN-C system Total connected load: 133 kVA Power factor: 0.6 Protection: 200 A gG (5 s) Weight Machine operating weight: 20,000 kg Transport weight: 16,000 kg Tool Magazine Tool change system: Pick-up system Tool management: Fixed-coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed Drives Drive type: Three-phase synchronous motors Travel measuring system X/Y/Z: Direct, absolute X Axes (X1 and X2) Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv factor: 7 Peak force: 2 × 10,000 N Continuous force: 2 × 5,000 N Positioning accuracy: Tp = 0.008 mm Y Axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z Axes (Z1 and Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle arrangement: Horizontal, twin-spindle configuration Motor spindles, liquid-cooled, synchronous drive Spindle diameter: 40 mm Tool interface: HSK-A63 Lubrication: Minimal quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (rated torque) Machining Area Spindle distance: 600 mm Travel Paths: - X axis: 600 mm - Y axis: 600 mm (optionally 875 mm) - Z axis: 500 mm Lrjdpfxoxt D Ezo Aacew Workpiece Clamping / Table System Swiveling mount with two separate rotary tables for installation of clamping bridges Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Rotary table Ø 800 mm, repeatability: < 0.008 mm Maximum workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table rotation speed: 50 rpm Angular acceleration: 2.5 – 10 rev/s² Positioning accuracy: ±5″ Tangential torque: 4,500 Nm Max. loading moment: 500 Nm Tool Change Times Chip-to-chip for n < 10,000 rpm: > 2.75 s Chip-to-chip for n < 17,500 rpm: > 3.15 s Note The system is delivered without product-specific tools, fixtures, or robot grippers.

Year of construction: 1997, condition: ready for operation (used), Turning diameter: 200mm, turning length: 400mm, turning diameter: 420mm, bar diameter: 60mm, max. spindle chuck diameter: 160mm, speed: 5000rpm, turret: 2, positions: 2x14, rapid traverse X/Z: 20m/min/30m/min. Machine dimensions X/Y/Z: approx. 7500mm/2100mm/2100mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible. Lrodpsu T Rgkofx Aacew

Condition: used, Year of construction: 2007, Double-spindle machining center in 5-axis design (on both sides) Travel x/ y/ z = 600/ 600(975) / 500 mm Number of spindles 2 Spindle distance 600 mm Rapid traverse 45 m/min Lrsdpfxotgu Ixe Aacjw Spindle speed up to 17,500 rpm Drive power 38 kW Tool magazine 2 x 72 tool positions HSK 63 tool holder CNC control Siemens 840D 1 x tool breakage control 2 x clamping bridge support H75 mm 2 x clamping bridges 5th axis Knoll coolant system, 70 bar 1 x chip conveyor KB1000 1 x drill head indexing 2 x tool planning system control 2 x A/U axis torsion compensation upgrade kit

Condition: good (used), Year of construction: 2014, operating hours: 48,000 h, functionality: fully functional, machine/vehicle number: 2080233, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, CNC Control SIEMENS 840D Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (grounded) Network type: TN-S or TN-C system Total connected load: 133 kVA Power factor: 0.6 Fuse rating: 190 A gG (5 s) Weight Operating weight of machine: 20,000 kg Transport weight: 16,000 kg Tool Magazine Tool change system: Pick-up system Tool management: Fixed-coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed Drives Drive type: Three-phase synchronous motors Linear measuring system X/Y/Z: Direct, absolute X-Axis Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Y-Axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z Axes (Z1, Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle arrangement: Horizontal, twin spindles side by side Motor spindles, liquid-cooled, synchronous technology Spindle diameter: 40 mm Tool interface: HSK-A63 Lubrication: Minimum quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (rated torque) Machining Area Spindle distance: 600 mm Travel paths: X-Axis: 600 mm Lsdpfxext D Ebo Aacorw Y-Axis: 600 mm (optional 875 mm) Z-Axis: 500 mm Workpiece Clamping / Table System OP1: Tilting support with two separate tilting tables for fixture bridges OP2: Double tilting carrier (Q-axis) with two direct-drive NC rotary tables (A-/U-axes) Double-sided gearing on the tilting carrier Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Repeatability Ø 800 mm: < 0.008 mm Max. clamping device and workpiece diameter: Ø 675 mm × 1,430 mm Max. workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table speed: 50 rpm Angular acceleration: 2.5 – 10 rev/s² Indexing accuracy: ±5" Tangential moment: 4,500 Nm Max. load moment: 500 Nm Tool Change Times Chip-to-chip at n < 10,000 rpm: > 2.75 s Chip-to-chip at n < 17,500 rpm: > 3.15 s

Year of construction: 2021, condition: as good as new (ex-display), Highlights: - Powerfull motorizied spindle 16.000 U/min | 206 Nm - Hydraulic clapming for fixtures - Latest Machine Generation Basic machine G640 Work area travel range: X = 1.050 mm, Y = 800 mm, Z = 1.050 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector Machine cooling system with an air-cooled cooling unit Machine control series FANUC 31i-MODEL B Plus Cycle package for measuring probes (RENISHAW) Control panel to enter tool data at tool loading and unloading position Rotary table with GROB pallet clamping system (B-axis) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication GROB spindle diagnostics GSD Single disc-type magazine HSK-A 63 with 50 pockets Tool cleaning device Electromechanical tool breakage detection device Twin palette changer Setup station driven by a three-phase servomotor Setup station door, manually-operated, for manual loading/unloading Additional control panel Pallet 630 x 630 mm, T-slots Equipping the pallet with 12 fluid connections Scraper-type conveyor, discharge height 1,100 mm High-pressure cutting fluid system (23 bar, ICS) Compressed air feed through spindle center Lrsdpfx Aaolaugaocew External compressed air supply via a flexibly adjustable hose Cutting fluid recirculation on the weekend Flush gun at the work area Air gun at the work area Part clamping system in work area, customer-specific Hydraulic power unit for the part clamping system KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP3: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP5: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP6: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Cooling unit for hydraulic proportional valves Part clamping system in setup station of pallet changer, customer-specific KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP3: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP5: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP6: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP7: Compressed air, seating check system (P2.1) KP8: Compressed air, seating check system (P2.1) KP8: Compressed air, seating check system (P2.1) KP10: Compressed air, seating check system (P2.1) KP11: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) KP12: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) Touch probe Renishaw RMP60 12-month warranty

Condition: good (used), Year of construction: 1990, CNC Cylindrical Grinding Machine Make: TSCHUDIN Type: HTG 22 - 862 Year 1990 with MARPOSS E14 control and measuring control E5. center width : 650 mm center height : 100 mm grinding length : 620 mm Weight : ca.4 500 Kg. Further data See : TECHNICAL DATA SHEET Ljdpfxjid Aphj Aacerw With many grinding stones and holders Complete machine documentation available. Machine in stock.

Condition: used, Tool holder shaft type:HSK-A 100 Ljdpfeg Nqlisx Aacorw Tool holder shaft type:Wohlhaupter Tool holder shaft type:Feindrehwerkzeuge Ausdrehkopf / Precision Turning Big selection of Wohlhaupter HSK-A 100 Tool holders / precision turning tools / adapters /extenders etc. for sale Sales list with prices upon request.

Condition: used, Year of construction: 2006, CNC Heidenhain TNC530 X/Y/Z 1,500/800/1,000 mm Swivel axis 0-180° A-axis C-axis B-axis Max. workpiece weight 1,500 kg Lsdswutxijpfx Aacerw Machine weight 18,000 kg

Condition: good (used), Year of construction: 2009, functionality: fully functional, We offer: Universal Machining Center Manufacturer: Deckel Maho Type: DMC 80 U Year of manufacture: 2009 Control: Heidenhain MillPlus Technical specifications: X-axis: 800 mm Y-axis: 800 mm Z-axis: 1000 mm C-axis: 360° A-axis: -25° / +120° Max. spindle speed: 10,000 rpm Table size: 630 x 630 mm Max. table load: 800 kg Center bore: ⌀ 50 mm Tool holder: SK40 Tool changer: 180 positions Feed rate (x/y/z): 0 - 60,000 mm/min Lrsdpovx Tmcofx Aacow Rapid traverse (x/y/z): 60 m/min Operating hours: approx. 75,463 h Spindle hours: approx. 22,122 h Technical features: - Internal cooling Accessories: - Chip conveyor - Measuring probe Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: used, TECHNICAL DETAILS - Quantity of spindles : 6 - Bar clearance : 40 [mm] - Rotation speed : 7 000 [rpm] - Spindle power : 13 / 24 [kW] Lrodpfx Aaeuhantscsw NUMERICAL AXES : 27 - Slides unit 1.1 : axes X and Z CNC-controlled - Slides unit 1.2 : axes X and Z CNC-controlled - Slides unit 2.1 : axes X and Z CNC-controlled - Slides unit 2.2 : axes X and Z CNC-controlled - Slides unit 3.1 : axes X and Z CNC-controlled - Slides unit 3.2 : axis Z CNC-controlled - Slides unit 4.1 : axes X and Z CNC-controlled - Slides unit 4.2 : axis Z CNC-controlled - Slides unit 5.1 : axes X and Z CNC-controlled - Slides unit 5.2 : axis Z CNC-controlled - Slides unit 6.1 : axis Z CNC-controlled + SCARA axis - Slides unit 6.2 : axes X and Z CNC-controlled - Slides unit 6.3 : axis X CNC-controlled ELECTRICAL INPUT - Voltage : 400 [V] - Frequency : 50 [Hz] - Installed power : 65 [kW] DIMENSIONS OF THE MACHINE - Floor space : 3329 x 2032 [mm] - Height : 2654 [mm] - Weight: 7100 [kg] HOURS - Hours under power : 45965 - Production hours : 19065 EQUIPMENT - CNC Siemens 840D (PL) double NCU - 2 control panels CN - 6 collet receivers TOPLUS with built-in stop - 1 counter-spindle in position 6.1 - Clamping device in counter-spindle : chuck Röhm KFD-HS 110/3 - Coolant through counter-spindle center - Cn options counter-spindle/ polygonal milling - Rear machining device on slide 6.2 : 3x fix - Preparation 2 additional controls with electronic shaft in position 1.2.3 - Preparation 2 additional controls with electronic shaft in position 4.5.6 - STAUBLI robot type TX60 (6 axes) - Robot collet double clamping external type PZN50 - Swiveling plate (4 positions) - Coolant tank KNOLL with hinged chip conveyor, 2 HP pumps 40 [bars] - Oil mist aspiration device Büschel - Cooling unit RIEDEL - Preparation ARTIS