Scrubber dryer cleaning machine

TASKI Swingo CO955

Condition: new, Year of construction: 2025, Manual pan & box brake SM 1270x2 mm is a machine for bending different elements from the metal sheets with maximum length 1270 mm and maximum metal thickness 2mm. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But manual pan & box brake SM 1270 thanks to special segmented bars can bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisted of parts with different lengths. So you can adjust it to the length you need to bend boxes and cassettes from all four sides. There are models of manual pan & box brakes we produce: Manual pan & box brake SM-1270 x 2mm Manual pan & box brake SM-1550 x 1.8mm Manual pan & box brake SM -2020 x 1.2mm Those manual box & pan brake in standard set have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle up to 135 degrees. The standard set of manual pan & box brake SM includes: - Manual box & pan folder - Angle measuring device - Four position angle limiter Gbodef Eywwopfx Ah Eow - Two segments with side cuts to bend cassettes with inside bends. As an additional option you can get: -Third segmented bar -Segments tempering option (in standard set pan & box brake’s segments go not tempered, but if you work with metal thickness more than 1mm we advise to temper one- so rigidity of segments will be higher and usage time of machine longer); - Change of upper segments height (from 30 to 45mm). So it lets to bend cassettes with height up to 45mm instead of 30mm. - Cross cutting knife. Designed for cutting metal sheets before bending them with folding machine. The maximum metal thickness for cutting is 0.8mm; - Multifunctional acceptance table to adjust different length limiters in different parts of bending machine. So it lets to save your time while same sizes cassettes or elements production. Dimension: 160.00Sm x 82.00Sm x 120.00Sm Weight: 350.00Kg

Condition: like new (used), Year of construction: 2019, operating hours: 3,000 h, TECHNICAL DATA Spindle hours: 3,000 h Dimensions and Weights Machine length: 6,452 mm Machine width: 2,900 mm Machine height: 3,271 mm Weight: 25,700 kg Electrical Specifications Operating voltage: 400 V Mains frequency: 50 Hz Control voltage: 230 V Maximum connected load: 54 kVA Rated current: 77 A Main fuse: 100 A Travel Paths X-axis: 800 mm Y-axis: 1,020 mm Z-axis: 970 mm A-axis: -185° – 45° B-axis: 360° Rapid Traverse X-axis: 65 m/min Y-axis: 50 m/min Z-axis: 80 m/min A-axis: 25 rpm B-axis: 50 rpm Spindle Maximum speed: 30,000 rpm Spindle taper: HSK-A63 Tool Magazine Number of tool stations: 140 Type: HSK-A63 SCOPE OF SUPPLY Includes (not an exhaustive list): - Grob G552 CNC machining center - Heidenhain TNC 640 - Minimax CO2 high-pressure - Fire suppression system - Knoll KF 600E/2600 - Coolant system - Camfil oil mist separator - Bielomatik central lubrication system - Liquidtool - Probe system - Set of HSK-40 toolholders - Complete operating documentation The exact scope of supply as per photo series Top Offer: GROB G552 Machining Center – As-new Condition & Fully Equipped For sale is a GROB G552 machining center in impeccable condition – used solely for test purposes and therefore virtually as-new. This machine combines the highest precision, reliability, and quality from GROB, and also comes with an exceptionally comprehensive range of optional equipment rarely seen elsewhere. Equipment Highlights: - Minimax CO₂ high-pressure fire suppression system – maximum operational safety - KNOLL KF 600E/2600 coolant system – ensures consistent machining quality even for demanding applications - Camfil oil mist separator – for clean air and a safe working environment - Bielomatik central lubrication system – for optimal maintenance intervals and long service life A rare opportunity for discerning users! Further Advantages: - Machine is installed and fully functional - Inspection under power possible by appointment - Perfectly suited for companies wishing to start production immediately – without compromise on quality or features Conclusion: If you are looking for the very best that GROB machining centers have to offer – in as-new condition and with high-end accessories – this is your opportunity. Please contact us for further information or to arrange a viewing appointment. Gbsdewwl Saopfx Ah Eew No liability will be assumed for the accuracy, completeness, or currency of the information provided.

Condition: new, Bernardo swivel bending machine with segmented top -, bottom - and beam TB 1020 Flex Working length 1020 mm Max thickness of sheet metal (400 N / mm2) 2.0 mm Maximum opening width with segments 48 mm Maximum opening width without segments 150 mm Maximum clearance height 125 mm closed Godpfx Ajd Hxm Ish Esbw Bending angle 0-135 ° Backgauge 600 mm Working height 900 mm Width 1400 mm Depth * 1070 mm Height 1260 mm Weight 430 kg * with Backgauge Properties Piano inserts in the top, bottom and beam results in a large number of bending possibilities Tapes and special sections with opposite bends are easily achievable with these models Universal bending machines for sheet metal working and repairers Simple swivel movement of the beam by means of handle Slight adjustment of the upper beam for efficient working High upper beam for the manufacture of highly bent profiles Large-sized flat Guide for precise work A cylinder of help helps the edges off the bending process Scope of delivery Segmented top - sub and bending flange Backgauge Corner segment left / right side 75 mm | 25. 30. 35. 40. 45. 50. 75. 100. 200. 270 mm

Condition: used, With an impressive 85 cm working width and maneuverability as its trademark, the Taski Swingo 4000 maneuvers smoothly through any space, be it offices, warehouses or production halls. The two 43 cm disc brushes ensure thorough cleaning, supported by an adjustable brush pressure of 56 to 112 kg. This powerful scrubber is designed with you in mind, with a 200-liter fresh water tank and an impressive work time of approximately 5 hours. ECO mode optimizes performance, while safety features such as an emergency stop, anti-skid wheels and an automatic parking brake ensure your peace of mind. User-friendliness is at the heart of the Taski Swingo 4000. In addition to its intuitive operation, it offers easy maintenance and a comfortable operator's seat. So, whether you are a seasoned professional or new to the world of cleaning technology, this scrubber will adapt to your needs. Transform your cleaning routine with the Taski Swingo 4000 - the ideal blend of power, precision and ease of use. Other specifications: - Working capacity: 4,500 m²/h, - Battery working time: 3 hours, - Scrubbing width: 75 cm, - Mopping width: 99 cm, - Clean water tank capacity: 110 liters, - Holding tank capacity: 125 liters, - Number of disc brushes: 2 (Ø39 cm), - Power source: Battery 24V, - Maximum speed: 6 km/h, - Brush pressure: 30 - 60 kg, - Traction on: Front wheel, - Noise level: < 70 dB (A), - Weight (excluding batteries): 225 kg, - Weight (incl. batteries): 381 kg, - Dimensions: 149.5 x 77 x 132 cm, Gbjdjuqk Dfjpfx Ah Ejw Would you like to know more about the Taski Swingo 4000? Then contact us, we would be happy to tell you more about it!

Condition: excellent (used), Here we offer a Despatch lab oven. Despatch Laboratory Ovens + 8 "WAFER LCC: Maximum temperature 260 ° C Lockable circuit breakers turn on the control panel for easy maintenance Protocol 3 control with large LCD display, built-in data logging capabilities and USB port for easy oven setup and data export Edelstellenne room with interior seams welded continuously on the insulation side to protect the working space from pollution Programmable door locking prevents the operator from opening the oven door while the cycle is running The door lock switch turns off the heating when the door is open The rolled air flow consists of 100% HEPA (High Efficiency Particulate Air) and is filtered to ISO Class 5 (Class 100) throughout the process cycle The Magnehelic Manometer monitors the pressure drop of the HEPA filter so you know when to replace the filter Electric door unlocking for ergonomic operation UL & C-UL Listed Control Panel Open Modbus communication connection (RS485) for remote monitoring and recording Gbjded Nfq Ijpfx Ah Eew Chamber measure L 350 mm Chamber measure B 350 mm Chamber Measure H 350 mm Maximum temperature 260°C Digital screen Yes Electric connection 230 V Total size L 830 mm Total dimensions B 910 mm Total Measure H 560 mm Type: LCC1-16NV-3 Condition: used/used Delivery: (See picture) (Changes and errors in technical D

Condition: new, 8 St. range L-W-H 720 x 580 x 1000 mm weight 128 kg Gsdpfx Aju Impmeh Eobw 100Kg je Lade Stable tool cabinet with 8 drawers, lockable. 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 620x450 mm. Maximum load per drawer 100kg!!! Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers 1x stacking tray

Condition: good (used), total length: 40,000 mm, 40 running meters of Bito P20 pallet racking Used goods in very good condition, see pictures. height 3,5 m depth 110 cm, galvanized Field load 12 tons Beam length 2.7 m blue Beam with load / compartment 1800 kg Negotiated price: € 2.250,-- net ex stock Offer consists of: + 15 pre-assembled frames, depth 110 cm, height 3.5 m + 56 beams, length 2.7 m, 1800 kg load per compartment +112 pcs. safety catches + 60 pcs. concrete anchors Load plates, documents, etc. are included. Further accessories can be found in the accessories catalog. Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Gbodpfx Ahsq Dk Dvo Ejw Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock)

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 250 h, Since 2021 for customer prints, product demonstrations and trade fair appearances in our possession. Completely ready for use and prepared by manufacturer-certified personnel from IGO3D, Desktop Metal Partner. Can be demonstrated in Hanover, Germany (also remotely via video call). Easy-to-use Additive Manufacturing 2.0 solutions for industrial production — delivering transformative value. Office-friendly metal 3D printing with two steps (Print > Sinter) and eight materials. Key benefits: „ Easy, two-step processing „ User-friendly software-controlled workflow „ Patented smart Separable SupportsTM technology for quick post-processing „ Qualified for eight materials „ Designed for office-friendly printing „ A trusted system used worldwide with success The easy-to-use Studio System leverages proprietary Bound Metal Deposition™ (BMD), an extrusion-based metal additive manufacturing process where metal rods — metal powder held together by wax and polymer binder — are heated and extruded onto the build plate, shaping a part layer by layer. Once printed, the binder is removed via the debind process, and then sintered, causing the metal particles to densify. The Studio System 2 is even easier to use than ever before with new material formulations allowing printed parts to be placed directly into the furnace without the need for a solvent debind. The result is a streamlined two-step process with a nearly hands-free experience. Eight materials are available, including a range of steels, copper, and nickel and titanium alloys. Simplified metal part production using safe-to-handle bound metal rods The Desktop Metal Studio system creates metal parts for functional prototypes, tooling, jigs and fixtures, and low-volume production applications with expert metallurgy built-in. Easily produce difficult-to-machine parts featuring complex geometries like undercuts and internal channels to optimize metal components in an office setting. Gsdpsm Rgzaofx Ah Eebw

Condition: excellent (used), Year of construction: 2013, Cantilever rack, heavy-duty rack, single-sided cantilever rack, pallet rack --Manufacturer: Bito,Cantilever rack one-sided, 3 bays type S height 3220 mm Gjdpstpdm Iefx Ah Eebw -Stands: 4 pieces 3220/750/75 mm grid 60 mm adjustable -Cantilever arms: 28 pieces 630/40/120 mm usable depth 600 mm -Load capacity level: 1600 kg -Transport dimensions: 3220/800/H360 mm -Total weight: 350 kg

Condition: like new (used), Year of construction: 2021, New storage platform for sale - already dismantled and ready for loading - statics and construction drawings available - delivery by freight forwarder possible nationwide Gbsdpeuph Avefx Ah Eow