CNC horizontal milling center

TONGTAI TOPPER HB 630

Condition: used, Year of construction: 2021, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 508 mm, feed length Z-axis: 635 mm, feed rate X-axis: 16 m/min, feed rate Y-axis: 16 m/min, feed rate Z-axis: 16 m/min, nominal power (apparent): 26 kVA, torque: 122 Nm, controller manufacturer: HAAS, Used Machining Center Brand: HAAS Model: VF-4 Year: 07/2021 Serial number: 1183245 Operating hours: Spindle on time: 6,000h Specifications: - Travels (X, Y, Z): 1270mm, 508mm, 635mm - Spindle-to-table distance (Min. - Max.): 107 - 742mm - Spindle speed: 8100 rpm - Spindle taper: ISO 40 Lodpoxqct Sefx Ak Djaa - HAAS CNC Control - HaasDrop (for wireless file transfer to CNC) - Rigid tapping; synchronized tapping, with integrated tapping cycles and up to 8 retract speeds. - Safe Run; a HAAS Control software function that reduces the risk of significant damage in case the machine is impacted. - Tool changer carousel: 20 tools - Includes early power-failure detection module. - Coolant tank: 208 liters with coolant kit - Variable-flow coolant pump allows control of coolant flow and pressure via M-codes. - Maximum tool diameter: 89mm (adjacent tool slots filled) - Maximum tool weight: 5.4kg - Table dimensions: 1321 x 495mm - Maximum table load: 1588kg - Maximum rapid traverse (all axes): 25.4 m/min Included options: - Preparation for through-spindle coolant - Auger-type chip conveyor - Programmable coolant nozzle, multi-position device that automatically and precisely directs coolant to the cutting tool

Condition: good (used), Year of construction: 2008, HAAS VF-5D / 40 MACHINING CENTER TRAVELS : X : 1,270 mm Y : 660 mm Z : 635 mm DISTANCE BETWEEN PLANE – TABLE AND SPINDLE NOSE : 178 – 813 mm TABLE : DIMENSIONS : 1,321 x 584 mm LOAD CAPACITY : 1,815 mm NUMBER AND SIZE X PITCH OF T-SLOTTS : 7.14 X 80 mm SPINDLE : ROTATIONAL SPEED : 8,000 RPM SPEED RANGES : 2 SPINDLE NOSE : ISO 40 Lajdovf Nw Dspfx Ak Dsa HIGH PRESSURE / INTERNAL COOLANT FEEDS : RAPID SPEED : 18,000 mm / min. WORKING SPEED : 12,700 mm / min. JOG : 0 – 1,260 mm / min. TOOL MAGAZINE : 24 POSITIONS POWER : 15 KW WEIGHT : KG. 7,000 YEAR OF FIRST INSTALLATION : 2008

Year of construction: 2019, condition: ready for operation (used), A simultaneous turning center Spinner with three turrets and extensive accessories, spare parts and tools is available. Travel X1/X2/X3: 180mm, travel Y1/Y2: +/-45mm, travel Z1/Z3: 704mm, travel Z2/E2: 620mm/720mm, rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: Speed: 5000rpm, nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: Speed: 700rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. chuck jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turret 1/2/3: Turret stations: 3x12, speed: 8000rpm, tool holder: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2880mm/2130mm/1990mm, weight: approx. 7500kg, operating hours: 27102h, control: Fanuc 31i. Including loading magazine Top Automazioni, cooling/high pressure system with 80bar, chip conveyor, fire extinguishing system, a comprehensive tool package and other spare parts. Documentation available. On-site inspection is possible. Lajdoua E Trepfx Ak Dja

Condition: good (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: 4ROLL, roller (bottom) diameter: 470 mm, roller (top) diameter: 470 mm, side roll diameter: 420 mm, roller diameter: 470 mm, roller length: 3,050 mm, working width: 3,050 mm, working height: 1,800 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 45 mm, sheet thickness aluminum (max.): 45 mm, sheet thickness copper (max.): 45 mm, overall weight: 43,000 kg, total length: 7,700 mm, total width: 2,410 mm, total height: 2,470 mm, power: 37 kW (50.31 HP), input voltage: 380 V, type of input current: three-phase, working length: 3,050 mm, Equipment: documentation/manual, emergency stop, PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM MODEL 4HCI3-35/30 YEAR 1990 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE PINCH PRE-BENDING Machine in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower 470 mm -side rolls left/right 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven powered with gear unit with hydraulic motor • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centralized commands joysticks and 3 digital readout. • Digital readouts of the rolls position bending and pre-bending repeatability. • Hydraulic tank capacity oil 350 liters – power electric 37 Kw voltage 380 /50 • Dimension 7700 x2410 x H 2470 mm - weight 43000kgs Lodpowb Scmjfx Ak Deaa

Year of construction: 2000, condition: ready for operation (used), Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000rpm, spindle power: 8.5kW, tool holder: SK40, tool positions: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control: Heidenhain TNC 426. An on-site inspection is possible. Ljdpjv Uqb Nsfx Ak Dsaa

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, table load: 680 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, tool weight: 5,000 g, number of axes: 3, This 3s HAAS VF-2SSYT CNC Vertical Machining Center manufactured in 2024 features a maximum spindle speed of 12,000 rpm and a robust tool changer with a capacity of 30+1 tools. The machine has been lightly used and is in excellent condition, offering travels of 762 mm in the X-axis and 508 mm in both Y and Z axes. Consider the opportunity to buy this HAAS VF-2SSYT vertical machining center. Contact us for further details. • Spindle nose to table (max/min): 610 / 102 mm • Table: • Size: 914 x 457 mm • T-slots: 3 • T-slot width: 15.9–16 mm • T-slot center distance: 125 mm • Spindle: • Max torque: 122 Nm @ 2000 rpm • Drive: Inline Direct-Drive • Taper: CT40 / BT40 / HSK-A63 (depending on configuration) • Bearing lubrication: Air/Oil injection • Tool changer: • Type: SMTC • Capacity: 30+1 tools • Max tool diameter: 64 mm (127 mm with adjacent pocket empty) • Max tool length: 279 mm • Tool-to-tool: 1.8 s • Chip-to-chip: 2.4 s • Feedrates: • Max cutting feed: 21.2 m/min • Rapids (X/Y/Z): 35.6 / 35.6 / 35.6 m/min • Axis motors (thrust): • X: 8,874 N • Y: 8,874 N • Z: 13,723 N • Electrical: • Input voltage (low): 220 VAC, 70 A full load • Input voltage (high): 440 VAC, 35 A full load • Coolant: Capacity 208 L • Air requirements: • Air required: 113 L/min @ 6.9 bar • Minimum pressure: 5.5 bar • 4th-axis ready Additional equipment • Mist/vapor extraction system • Automatic water and oil dosing system for coolant Laodpfxjykrz Hs Ak Dsa • Integrated coolant oil separator • Renishaw probe system • 2 vises • Complete set of high-quality toolholders, end mills, and drills

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 7 St. Tool Trolley – 8 Drawers – Partially Equipped (6 Drawers) High-quality workshop trolley with 8 ball-bearing drawers, 6 of which are fully equipped with tools. The trolley is lockable and equipped with 4 sturdy casters (2 swivel, 2 lockable) for comfortable and safe operation. A robust polypropylene worktop completes the set. Lajdpfx Akeu Img Ss Dja Features & Quality: – Ball-bearing, extendable drawers – Central locking mechanism / lockable – 4 casters (2 swivel, 2 lockable) – Tools made of chrome vanadium steel – Tools neatly stored in foam inserts Drawer 1 Ratchet and socket sets 1/4", 3/8", and 1/2", including ratchets, universal joints, extensions, and short and long sockets (approx. 4–30 mm). Drawer 2 Extensive ratchet accessories: Torx (with/without bore), Allen, slotted, Phillips (PH/PZ), spline, Ribe, and five-point – for 1/4", 3/8", and 1/2". Drawer 3 Open-end/ratchet wrench set (approx. 8–22 mm), double box-end wrench set, and torque wrench. Drawer 4 Precision, slotted, Phillips, and Torx screwdrivers in various sizes, including soft-grip versions. Drawer 5 T-handle hex/Allen key set with ball end and T-handle Torx set (T10–T40). Drawer 6 Pliers and hand tool set: circlip pliers (internal/external), combination and needle-nose pliers, side cutters, pipe wrench, claw hammer, and center punch set.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 700/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] - Cutting feed rates (X/Y/Z) : 1-30000 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 850 x 410 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 2165 X 2087 [mm] - Machine height : 2345 [mm] - Machine weight : 2000 [kg] MACHINE HOURS - Number of working hours : 3207 [h] Ljdjx Tvizspfx Ak Djaa EQUIPMENT - CNC : Fanuc 31i model B5 - 3 colors status lamp DIVIDING UNIT * manufacturer : Häberle * model : DTTiB * travel 4th axis : 360 [°] * indexing precision 4th axis : 0.001 [°] * travel 5th axis : -7/+100 [°] * indexing precision 5th axis : 0.001 [°] * tightening type : Pneumatique - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : ARRIERE - Tool probe : Renishaw - Workpiece probe : Renishaw - Electric transformer - Milling vice - Tool-holders

Condition: used, Year of construction: 2005, travel distance X-axis: 1,020 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, total height: 2,770 mm, total length: 3,300 mm, total width: 2,687 mm, The Micron VCE 1000 Pro is a powerful and precise CNC machining center designed for demanding milling tasks. With travel distances of 1020 x 560 x 600 mm, it enables flexible machining of medium-sized workpieces. The machine is equipped with a Heidenhain iTNC 530 control, an ISO 40 tool taper, and a spindle speed of up to 10,000 rpm, making it ideal for high-precision, high-speed machining. Laodpjxyig Rjfx Ak Dja The robust table with a 1000 x 560 mm T-slot area supports workpieces up to 1,350 kg. Fitted with a chip conveyor, coolant pump, and a 18.5 kW motor, the VCE 1000 Pro offers a reliable combination of power and precision.

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT40 BIG PLUS - Spindle power : 26 [kW] - Spindle speeds : 15000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 560/640/640 [mm] - Rapid traverses rates (X/Y/Z) : 60 [m/min] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 PALLET CHANGER - Pallet changing device type : Rotopalette - Pallet size : 400X400 [mm] - Pallets number : 2 - Maximum weight upon pallet : 400 [kg] - Maximum workpiece diameter : 630 [mm] - Maximum workpiece height : 900 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 4100X2300 [mm] - Machine height : 2720 [mm] - Machine weight : 11000 [kg] MACHINE HOURS - Number of working hours : 3700 [h] EQUIPMENT - CNC : Fanuc 31 iB Interface : Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Linear scales - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 25 [bars] * Coolant through spindle * With cabin washing - Chips conveyor : Arrière - Spindle cooling unit - Tool probe Laodpfeuhbv Sjx Ak Dsa - Workpiece probe : Renishaw OMP60