Laser engraving machine

TRUMPF LASERSIGN PL 2

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine Iedoylk Nxjpfx Abgsar - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Condition: good (used), functionality: fully functional, Year of construction: 2019, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser hours: 980 h, laser power: 4,000 W, punching force: 22 t, Equipment: CE marking, nozzle changer, safety light barrier, Machine - C-frame - Coordinate guide - Linear magazine with 25 stations for clamps and tools - 4 x hydraulic clamps - Drives with maintenance-free three-phase motors - Repositioning system with programmable hold-down - Flap for punched parts 500x500mm incl. sensor - Foot pedal for closing clamps - FocusLine - NitroLine - FastLine - FlyLine - Additional XP and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500x500mm incl. sensor - Liftable laser cutting support TRUMPF Laser - TruFlow 4000 laser incl. LensLine and optimized standby - High-frequency excitation - Fine filtration of compressed air for beam tube ventilation - Closed beam guidance Cutting Head - Lens cutting head with 170mm focal length - Universal quick-change device for cutting head - LensLine - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Punch slug extraction - Calculation of fill level in the punching console - Stroke counter for punches - Spray lubrication for punches - Fill level monitoring for tool lubrication - Stripper position measuring system with sheet thickness measurement function Control System - TRUMPF control based on Rexroth IndraMotion - Touch panel with 19" TFT color display - Integrated technology data - Programmable cutting gas pressure - Remote Support interface - Automatic shut-off with wake-up function - Production planner Functions - PlasmaLine Data Transmission - USB interface - RJ-45 network interface - Wireless Operation Point Safety - CE marking - Two-beam safety light barrier - Monitoring system for gas pressure, temperature and cooling water - Emergency stop for drives - Warp detection - Protection against stray radiation Extended Standard Equipment: - Network installation via Remote Support - Chiller (water-air) - Compact extraction system - 1st locating pin (inside right) - 2 finished parts containers - Chip container - 40 used RTC cassettes + die plate Punch Quality Package - MultiShear - Deburring and rolling technology - Adaptive stroke calibration - StripLine Forming Package - Thread forming incl. thread former breakage control - Marking/fast beading - MultiBend - Height-adjustable clamps - Automatic nozzle changer - MultiTool - Engraving - Smart Punch Monitoring with sheet format detection - 4 individually openable clamps - Automatic clamp closing with mechanical sensor zero stop Iodeyu S D Aspfx Abgjar - Repositioning cylinder - Vibration-damped installation - Chip conveyor with tilting container - Foot pedal start incl. rear-view mirror - Brush tables with loading and unloading support - Ejector unit for small parts - CO2 extinguishing system for compact extractor - Connection piece for exhaust air duct of compact extractor MobileControl App SheetMaster (AK08) UF - Loading station with spreader magnet - Simultaneous loading and unloading during main time - Peeling system incl. positioning aid for oversize formats - Additional positioning aids for medium format - Additional positioning aids for large format - First add-on package with 9 suction cups (incl. vacuum ejector) - Unloading monitoring for laser parts - Loading of blanks GripMaster 4000 x 1500 mm SortMaster Pallet 4 pallets longitudinal ToolMaster Linear 54 stations with simultaneous tool setup during main time - Safety devices for warehouse connection incl. 2nd light barrier circuit - Warehouse interface

Condition: new, Year of construction: 2025, functionality: fully functional, shaft length: 10,700 mm, laser power: 30 W, Laser Engraving Machine with 30 Watt Laser Power - 30 Watt CO2 Metal Tube Laser Source Demonstration unit, with minimal operating hours - includes Windows 10 Pro 64-bit PC system - includes 22" monitor Iajdpfx Abjirmgmogor - fully installed and calibrated - Engraving software in German - Very easy to operate - Switch on and start immediately - 30 Watt CO2 laser source for high-contrast and fast marking with extremely high resolution - Capable of deep engraving - Wobble function - Suitable for engraving on, e. g., wood, plastic, anodized surfaces, etc. - Heavy-duty industrial quality - Complete system / ready for immediate use - Working area approx. 500 x 600 x 600 mm (W x D x H) - Clamping table with mounting threads in 50 mm grid - LED work area lighting - 50 mm connection for fume extraction - Engraving area approx. 180 x 180 mm - Expandable up to approx. 300 x 300 mm - Includes foot switch to start the engraving process Please also check our attractive leasing/financing offers. Sale exclusively to commercial customers. Delivery / consulting / sales only within Germany / Austria / Switzerland Machine dimensions approx.: Width: 800 mm Height: 1800 mm Depth: 1000 mm Weight: approx. 150 kg

Condition: excellent (used), Year of construction: 2013, CNC lathe DMC Korea model Q6 year of manufacture: 2013 chuck: 6 inches max turning diameter: 170 mm max turning length: 240 mm spindle bore: 44 mm weight: 2,500 kg dimensions: 2370x1430 mm machine height: 1640 mm Iedpfsxxb Scsx Abgjar

Condition: new, functionality: fully functional, Year of construction: 2026, Professional CO2 laser with a 1600mm x 1000mm work table and a tube with a rated power of 150W reaching 168W at peak! The standard equipment includes a CW5200 liquid cooler, a compressor for blowing the lens and material, and a smoke extractor. Working Area: The 1600x1000mm table allows you to work with large and complex projects. Laser Power: Rated power of 150W, reaching 168W at peak! This is a guarantee of fast and precise operation. Cooling and Efficiency: Equipped with a CW5200 liquid cooler ensuring optimal working conditions and a compressor for blowing the lens and material. Modern Technologies: Ruida RDC6445S controller and support for many graphic formats, WiFi and USB interface, and color separation. High Precision and Repeatability: Thanks to precise stepper motors and linear guides from LEADSHINE and the ability to work in 2500DPI resolution. Versatility: Excellent effects in engraving and cutting materials such as acrylic, wood, textiles, leather, plastics and much more! Exceptional Standard Equipment: PURI 150-168W laser tube, smoke extraction, steel honeycomb table, and blower compressor. Advanced functions, high quality of workmanship and a wide range of possibilities make our CO2 1610G laser not only a work tool, but also an investment in the future of your business! Model: 1610G Working area: 1600x1000mm (Y-axis pass-through table) Rated laser power: 150W Peak laser power: 168W (!) Laser tube type/type: Glass CO2 laser tube Cooling type: Closed-loop water cooling - CW5200 cooler Max. engraving speed: 800mm/s Iasdotvmnqspfx Abgjr Suggested max. cutting speed: 400mm/s Max. Cutting thickness: up to 25mm depending on the material and parameters Min. engraving size for letters: 1mm x 1mm Engraving precision: 2500DPI Repeatability: +-0.01mm NEW – Controller and motherboard: Ruida RDC6445S - a module with advanced functions providing advanced control over the parameters and processing process Supported graphic forms: DST, PLT, BMP, DXF, DWG, AI, LAS, etc. Supported interface: WiFi, USB Color separation: Yes Drive system: Hybrid closed-loop stepper motors with high holding torque by LEADSHINE 15mm linear guides by PMI Standard equipment: PURI 150-168W laser tube Fume extraction and piping CW5200 cooler Table knife Rigid, stable steel honeycomb table Blowing compressor

Condition: new, Year of construction: 2024, dimension of workpiece 200 x 200 x 200 mm travel -x axis 110 mm travel -y axis 110 mm Iaedewgn D Djpfx Abgsr

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 21,346 h, laser power: 3,200 W, X working area max.: 3000 mm Y working area max.: 1600 mm Control: Rexroth IndraMotion MTX Laser power: 3000 watts Machine - Enclosed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamps and tools - Hydraulic clamps (3 pieces) - Maintenance-free three-phase motors for drives - Repositioning device with programmable hold-down - Foot pedal for clamp closing - Beam protection with direct access - Parts chute on the right - Parts flap on the left - Sensor for parts flap - Work area illumination - FocusLine - Retrofittable for SortMaster Compact - Protective tool - Transport and installation device TRUMPF Laser - Laser light cable (LLK) according to standard layout (10m) - Laser power control - Laser logbook function - Closed beam guidance via laser light cable (LLK) - Separate power supply for TruDisk Compact Cutting Unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punching Head - Delta Drive - Rotatable mono-tool adapter - Programmable hold-down position - Tool length compensation - Punch spray lubrication - Punch slug extraction - Forming function - Stroke counter for punch Control - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color screen - Integrated technology data - Programmable cutting gas pressure - Remote support interface - Auto shut-off with wake-up function - Program management - Production plan Data Transmission - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety - CE marking - Two-beam safety light curtain Extended Standard Equipment - TruDisk 3001 solid-state laser with 1 LLK output - Chiller (water-air) - Compact dust extraction system - 1st locating pin (right inside) - Ball tables - Good parts container for parts chute - Chip container for rear removal Extended Laser Equipment - Copper cutting package - Brass cutting package Extended Punching Equipment - MultiShear function - Multitool function - MultiBend function - Thread forming with thread counter Thread former breakage monitoring Lubricant level monitoring - Marking/fast embossing function - Engraving function - Deburring and roller technology function - Ejecting small parts function Parts Ejection - Integrated sorting function for parts chute • Sensor for parts chute • Tray line for 4 standard trays 300 x 400 mm • Customer-supplied trays Extended Machine Equipment - 1x additional clamp - Machine rated for ambient temperatures up to 43°C Special Sheet Metal Processing Iodpfxeylk S Te Abgoar - Brush tables - Warping detection Options for Compact Dust Collector - CO2 extinguishing system for the compact dust collector Data Transmission - Wireless Operation Point Machine Accessories - 1 set RTC cassettes incl. die plate SheetMaster Compact - SheetMaster Compact 3000 x 1500 mm (AK05) • Loading station with spreader magnet for sheet separation • Suction frame • Vacuum sensor system • Double sheet detection • Unloading cart for scrap grid and microjoint sheets • 2nd operator's station for loading and unloading.

Condition: used, Year of construction: 2005, engraving field 120 x 120 mm table-size 250 x 250 mm workpiece weight max 50 kg Control Fobagraf machine weight ab. 1000 kg machine frame made of welded steel construction Cross slide, hard stone design, table top with steel stop iron Height-adjustable laser head Quality-switched ND: YAG laser head, lamp-pumped, 100 W Deflection unit mounted on the laser head (with standard lens) Z-axis with gearbox and servo drive Servo axis control with X-, Y-, and Z-axes Water-cooled Control: Fobagraf user software package Operating system: Windows 2000 Iodpsylcqhefx Abgjar operating hours: 17.388 h manual included

Year of construction: 2021, operating hours: 500 h, condition: excellent (used), functionality: fully functional, 🔴 Trotec Speedy 100 CO₂ Laser – 30W + Filtration Extractor – Excellent Condition Professional laser cutting and engraving machine, Trotec Laser Speedy 100, renowned for its reliability, precision, and speed. Ideal for laser engraving and cutting on wood, acrylic, leather, rubber, plastics, textiles, paper, etc. 🔧 Technical Specifications: Brand: Trotec Laser Model: Speedy 100 Technology: CO₂ Laser Laser tube power: 30 W Working area: approx. 610 × 305 mm Height-adjustable worktable Safety lid with filtered viewing window Integrated front control panel Compatible with Trotec software (JobControl and Ruby) / standard drivers 🌬️ Included: Trotec filter extractor (standalone solution, ideal for workshops without external ventilation) Honeycomb cutting table Lens Lens cleaning fluid 📌 Condition: Excellent condition Well-maintained machine, used in a professional environment Testing possible on site Iasdpjydvfvjfx Abgsr - Can be viewed and tested in Bordeaux - Assistance available for handling/loading - Transport at buyer’s expense (or can be arranged together); I can pack the machine in an OSB crate