Press brake

TRUMPF TruBend 5050

Condition: ready for operation (used), Year of construction: 2007, This TRUMPF TruBend V5050 press brake was manufactured in 2007. It features a press force of 500 kN and a bending length of 1275 mm. Equipped with a stable machine frame, electro-hydraulic upper drive, and a 2-axis backgauge system, it ensures precision and efficiency. Ideal for high-quality bending operations. Contact us for more information about this machine. Additional equipment • Stable machine frame as a welded construction in all-steel construction / Pressure beam with high bending strength / Spherical bearing of the pressure beam with pressure beam inclined position / Electro-hydraulic upper drive with 2-cylinder technology / Proportional valve technology and switchable double pump / Modern block hydraulics with control valves mounted on the cylinder / Electronic pressure compensator / Measuring system with centrally mounted glass scales and temperature compensation / Upper tool holder system "New Standard Clamping" manual, hardened, self-centering, for vertical tool changes / Lower tool holder with hydraulic clamping, hardened / Programmable lower tool displacement (pneumatic, 2 positions) / 2-axis backgauge system with rack and pinion drive for X and R axes, 2 stop fingers with secure front adjustment / Machine control: TRUMPF TASC 6000 / Control panel with LCD keypad, foot switch for emergency up, down, and emergency stop / Safety device: integrated side doors / Control cabinet cooling (air-to-air heat exchanger) / Oil cooler / Network-capable / Modern machine design / Installation, commissioning, and instruction / Hydraulic upper tool clamping / BendGuard / TruBend documentation Kwodex D Hb Hepfx Ab Tow Machine Benefits Technical Machine Benefits • Press force: 500 kn • Bending length: 1275 mm / free column clearance: 1040 mm / installation height: 385 mm • The machine was serviced annually by trumpf. • Trumpf maintenance contract.

Condition: excellent (used), Year of construction: 2007, turning length: 1,545 mm, turning diameter over cross slide: 660 mm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, Make: MAZAK Type: INTEGREX 200-4 ST Control: MAZATROL MATRIX Year: 2007 Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Kjdox S Hm Iepfx Ab Tjww Height: 2600mm Weight: 14000kg

Condition: new, Year of construction: 2026, High-class pallet jack with an accurate electronic scale and a load capacity of 2500 kg. It has double rollers made of polyurethane which ensures stable, quiet, long and trouble-free work. The pallet jack is designed to transport and control the weight of products in warehouses, shops, on construction sites or in delivery vehicles. Its reliability and lightweight design make it an indispensable helper in transporting loads up to 2500 kg. The SP2500 SUPER trolley is an ideal solution for logistics and warehouse workers weighing loads on a daily basis. Service departments often struggle with determining the weight for carriers. We met the needs with our modern model of a pallet truck with electronic scales. This is a solution that will significantly save time and facilitate internal transport. Machine characteristics: The trolley is equipped with exact scales, which allows you to weigh the load at any time. Swivel wheels and guide rollers covered are polyurethane which ensures light work, does not scratch or stain the surface. Pallet truck equipped with a hydraulic pump with a chrome-plated piston and a safety valve to prevent overloading the device. The model that we offer has the advantages of an ordinary pallet truck and is additionally characterized by an accurate weight. Large steering angle allows maneuvering in confined spaces. Weighing accuracy +/-0.5 kg, Accuracy level - III. Display and scale features: Backlit display Large letters/numbers displayed Kwedpfxjvvkyns Ab Tew 6-digit display. Battery accumulator placed in a solid steel casing Charger included Specifications Maximum lifting capacity 2500 kg Distance between fork arms 570 mm Fork length 1150mm Fork width 170mm Length / Width / Height 1570x570x1205mm Weight 89 kg

Year of construction: 2000, condition: excellent (used), Span approx. 20,0 m Kwedpfx Ajqfc Egob Tsw Lifting height approx. 8,0 m Make/reconstruction HILGERS/TEICHMANN Modification/New construction 2000/2021 Crane equipped with: - Double-rail trolley with 4-corner rope outlet - Magnet System prepared - Radio remote control - Optionally with magnetic traverse or spreader

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Sturdy base frame and manipulator made of cast aluminum construction - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger Kwsdoxayl Dspfx Ab Tsw - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Condition: excellent (used), feed length X-axis: 450 mm, feed length Y-axis: 300 mm, feed length Z-axis: 300 mm, CNC TOS INTOS ZEBRAK FNG30 milling machine TNC310 Heidenhain control X450mm Y300mm Z300mm tool clamping hydraulic inverter on spindle SK40 machine in very good condition Kodjrq D Ukopfx Ab Tsww

Year of construction: 1976, condition: good (used), strip width: 300 - 1.350 mm Kedpfsbh Ubwox Ab Tsww strip thickness: 0,35 - 3 mm coil weight: 12,5 t mandrel Ø: 508 mm

Condition: used, Year of construction: 2007, Technical details: x-travel: 635 mm y-travel: 460 mm z-travel: 510 mm control: 3D Heidenhain i TNC 530 table-size: 790 x 560 mm table load capacity: 600 kg tool taper: SK 40 Revolution per minute: 20 - 12 000 U/min. tool changer with: 20 place spindle hours: 36.050 h operating hours - idle run: 91.000 h total power requirement: 13,9 kW Kwsdpfow A I Uuex Ab Tsw Weight approx.: 3,6 t tool taper: SK 40 range of revolution per miute: 20-10.000 U/min Tool changer: 20-fach dimension machine xH: 3,0 x 2,0 x 2,15 m

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, overall weight: 22,800 kg, pressing force: 250 t, CNC press brake Kwsdjr Sxq Ropfx Ab Tsw Manufacturer: Weinbrenner Type: GP250 Machine specification:- Crowning -Matrix displacement -Rear stop type 2 -Front bending aid (removed for transportation) -DNC 900PS control unit All documentation for the machine is available.

Condition: excellent (used), Year of construction: 2016, For sale: Prima Power BCe Smart 2220 (2016) panel bending machine. Main advantages: Servo-electric technology – up to 60% lower energy consumption and up to 70% lower maintenance costs High bending quality and precision Compact layout, operator-friendly design Semi-automatic operation, manual sheet loading/unloading Equipped with a safety system: laser scanners, light curtains Technical specifications: Max. bending length: 2250 mm Max. sheet length: 2850 mm Max. sheet width: 1500 mm Max. panel diagonal: 3000 mm Max. bending height: 204 mm Bending force: 32 t (320 kN) Pressing force: 52 t (510 kN) Processable steel thickness: up to 3.0 mm Minimum thickness: 0.5 mm Kwjdpfx Abexfiw Ts Tew Average power consumption: 4.0 kWh Additional equipment and features: Software: Master BendCam 2D, Tulus HMI Tool library, visual simulation of the bending process Remote diagnostics, user-friendly control interface Lowerable work surfaces – convenient parts handling Year: 2016 Condition: Used, well-maintained, connected, can be seen in operation. If you have any further questions, we will be happy to answer them.