Twin Ribbon Mixer

Twin Ribbon Mixer

Condition: excellent (used), pressure: 210 bar, Gaulin, Homogenizer model MC18 3TPSX. stainless steel clad, 2 stage hydraulic valve assembly, Hnjdpfowf Itcsx Aaask 54mm pistons, Tungsten Carbide coated. aseptic cylinder block, puppet valves.. Remote controlled homogenization pressure adjustment and read-out. Capacity 6000 l/h, 210 bar Maintenance history available. Spare parts available. Excellent working condition

Condition: like new (used), Completely made of special stainless steel Speeds: 2 of the working worm and 2 of the feeding worm Hole plate diameter: 114 mm Hopper capacity: 100 liters Throughput depending on material type, speed, and cutting set: up to 1500 kg/h Machine width: 90.0 cm Machine depth: 84.0 cm Hsdpfewd N Nvox Aaasnk Machine height: 116.0 cm Power of motor: 11.0 kW, 21 A Voltage: 400 V, 50 Hz Machine weight: 450 kg

Condition: used, Power generator, emergency power generator, generator, power generator, power generator, emergency power generator Hsdpfedparyox Aaaenk -Power: 3 kW -Engine: Briggs & Stratton -Sockets: 2 x 220 V lighting current -Dimensions: 820/620/H460 mm -Weight: 60 kg

Condition: used, D-6886-Delford Type SP 800 Hnsdpfxoc Nlxpo Aaask Delford SP800, Film wrapping machine, Packing materials: stretch films 12,5 – 25 micron (50-100 gauge) P.V.C. or any suitable heat sealable types. Max. roll with 450 mm, max. roll dia. 250 mm. Speed of operation: 40 – 80 packs per minute. Max. Packs sizes: L 300 mm, W 200 mm, H 120 mm, Girth 420 mm, Min. Packs sizes: L 130 mm, W 90 mm, H 10 mm, Girth 200 mm, Dimension: 5290 x 1049 x 1430. Machine weight: approx. 1400 kg.

Condition: like new (used), Completely made of special stainless steel Specialized for grinding cheese and yellow cheese BLOCKS Hole plate diameter: 200 mm Hopper capacity: approx. 400 liters Synchronized speed for shatter and feed screw Hnjdpspgnftofx Aaask Working worm Machine dimensions in сm: Width: 215,0 Depth: 150,0 Height: 196,0 Main Motor Power: 45 kW Installed Power approx. 65 kW Voltage: 380 V, 50 Hz

Condition: ready for operation (used), Year of construction: 2008, A SIG Corpoplast blow molding machine is available. Output: 21600 bottles/h, bottle formats: 500ml/750ml/1000ml/1500ml, max. blowing air pressure: 40bar, dimensions X/Y/Z: approx. 7000mm/4300mm/3100mm, weight: approx. 20000kg. Including preform feeder Transver AG, year of construction: 2008, silo, elevator, sorting and chute. Documentation available. On-site inspection is possible. Hnjdpfxot Eu Azs Aaaek

Condition: good (used), Gardner 800l ribbon blender 800l ribbon blender, single shaft, stainless internals, swing top lid, discharge chute, 3Ph Hnedpfx Aelcdz Hjaask

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC Hnedpfxowp Rqfs Aaaek The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Year of construction: 1995, condition: ready for operation (used), Four dissolvers from various manufacturers are available. 1) Niemann NLD I, year of manufacture: 1995. 2) Vollrath VDSVY 15, year of manufacture: 1992, shaft length: 700mm, disk diameter: 400mm, tank volume: 400l, tank diameter: 785mm, tank height: 990mm, outlet diameter: 45mm. 3) Vollrath VDSVY 40, year of construction: 1991, tank volume: 400l, speed: 1000rpm, shaft length: 700mm, disk diameter: 400mm, machine dimensions X/Y/Z: approx. 3200mm/800mm/1200mm. 4) Pendraulic WDV 10, speed: 1800rpm, shaft length: 985mm, disk diameter: 275mm, lifting height: 1250mm, machine dimensions X/Z: 560mm/3450mm, weight: approx. 850kg. On-site inspection is possible. Hnedpevnuckefx Aaaek

Condition: ready for operation (used), Year of construction: 2011, Gas semi-trailer cryogenic for LNG (Liquid methane). manufacturer: CRYOCAN EU registration. Hnjdpfx Aotulh Isaask Year: 2011 Volume: 50,25 м3 Vacuum certificate We have also other tankers for LIN, LOX, LAR, LNG und CO2, argon, oxygen, nitrogen and carbon dioxide, hydrogen We will be glad to answer your questions via Phone and E-mail