Chuck flange

unbekannt Ø 200 mm

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 200 mm -Mount: Short cone 4 / Cone Ø 61-63 mm Short cone flange with camlock fastening -Bolt circle: Ø 82 mm -Through hole: Ø 41 mm -Dimensions: Ø 200 x 125 mm Kedpfx Agoxuflfszonf -Weight: 9.5 kg

Condition: used, Hydraulic scissor lift table GRUSE type ELS 0.5-8-1-G-SO Make No.: 124984 Year of construction 2017 lifting capacity 300 kg platform size 1250 x 800 mm useful stroke max. 785 mm Overall height - table bottom 345 mm Overall height - table top 1130 mm Motor power 0,8 kW Mains connection 400 Volt, 50 Hz - foot switch for up and down, with emergency stop and key switch for control on Knjdpfxeixq Hnj Agzjf - single shear with one lifting cylinder - revolving safety contact strip with limit switches under the upper frame - adjustable limit switch for the upper lifting restriction - Table top with sturdy wooden worktop and airliner rails with lashing eyes - hydraulic power unit with tank mounted under the table - feet under the table corners, mobile with lift truck own weight 250 kg very good condition, almost as new

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 200 mm -Bolt circle: Ø134 mm -Hole: short cone 6, cone Ø 101 - 106 mm Ksdpfx Agoxrk T Njzsnf -Dimensions total Ø 200 x 145 mm -Weight: 7.6 kg

Condition: good (used), Four-jaw chuck, 4-jaw chuck Knodsmxpvbjpfx Agzjf -Four-jaw chuck: chuck size Ø 200 mm -Passage: Ø 60 mm -Bolt circle: Ø 175 mm -Weight: 13.8kg

Condition: used, Year of construction: 2011, operating hours: 24,300 h, Equipment: all wheel drive, German Machine Technical Specifications – Caterpillar 988H (approx. 2012) Below is a comprehensive overview of the key specifications: Engine & Performance * Engine model: Cat C18 ACERT, 6-cylinder, turbocharged * Displacement: approx. 1104.5 cu in (18.1 l) * Rated power (net): 501 hp (374 kW) according to ISO 9249 or EEC 80/1269 * Gross power: approx. 555 hp (414 kW) * Additional info: ISO 14396 Net: 540 hp; ISO 3046-2 Gross: 520 hp Weight & Capacities Kjdpfx Aoxar Hysgzjnf * Operating weight: approx. 128,328 lb (58,209 kg) * Rated payload: approx. 27,558 lb (12,500 kg) * Maximum bucket capacity: approx. 10 yd³ (8 m³) heaped; 8 yd³ (6 m³) struck; 6.9 yd³ (5.3 m³) Dimensions & Volumes * Length with bucket on ground: approx. 40.08 ft (12.2 m) * Width over tires: approx. 11.75 ft (3.58 m) * Cab height: approx. 13.42 ft (4.13 m) * Maximum hinge pin height: approx. 19.18 ft (5.85 m) * Clearance at full lift: approx. 6.66 ft (2 m) * Ground clearance: approx. 1.67 ft (0.55 m)

Condition: good (used), Heavy-duty castors, heavy-duty wheels, tires, tires with rims, heavy-duty tires, forklift tires -Heavy-duty castors: 4 pieces, from electric forklift -Tires: Ø 200 x 80 mm -Hub: Ø 65 x 45 mm / Dimensions see photos Knsdpfxjxbyltj Agzef -Shipping/Price: complete -Dimensions each: Ø 200 x 170 mm -Weight: 10.5 kg/piece

Condition: used, Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Throughout: Ø 60 mm -Weight: 14.5 kg Knsdpfxjd I Ucye Agzof

Condition: used, Drilling machine, column drilling machine, pillar drilling machine, pillar drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear -with two-spindle drilling head Manufacturer Sigloch Schrieder Type: V602 -Drive power: 1.02/0.88 kW -Drill distance adjustable: 18-110 mm -Max. Drill: 2x Ø 6 mm -Table size: 275 mm -Spindle mount: MK3 -Projection: 220 mm Ksdpjc Rpnnjfx Agzjnf -Speeds: 100-2900 rpm -Columns: Ø 100 mm -Spindle stroke: 75 mm -Transmission -Dimensions: 900/400/H1910 mm -Weight: 230kg

Condition: good (used), 4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 200 mm Kjdpfx Agev Uwqkjzonf -Type: LK 200 A72-2163-132 -Thread: M20 -Bolt circle: Ø 140 x 17 mm -Jaw width: 23 mm -Passage: Ø 32 mm -Dimensions: Ø 200 x 170 mm -Weight: 18.8 kg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 200 mm -Hole circle: Ø 132/M16 -Price: per piece Kedpfsd N Uy Tox Agzonf -Number: 3 pieces -Dimensions: Ø 200/H51 mm -Weight: 7.9 kg

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: milling machine table -Table surface: 600 x 220 mm -Y-axis: 130 mm movable, hand crank with fine adjustment, see photos -T grooves: groove width 12 mm, groove spacing 45 mm -Total dimensions: 690/490/H300 mm -Weight: 72 kg Kodeqddi Uopfx Agzjnf

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 200 mm -Hole circle: Ø 120/Ø 12 mm -Dimensions: Ø 200/H37 mm -Weight: 7.5 kg Knjdpfxed Rakre Agzef

Condition: used, Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 200/142 mm Knjdpfxod Ta Nys Agzsf -Height: 20 mm -Hole circle: Ø 171/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 192x pillows available -Price: per piece -Weight: 0.3 kg/piece

Condition: good (used), Year of construction: 2016, Bosch Rexroth Linear Cylinder Machine The machine is a special production for Bosch for own use in the production process. The machine contains: Rexroth MSK050C-0600-NN-M1-UG1-NNN 3-Phase Synchronous PM-Motor Festo DGC-40-650-KF-Y5R-A 532449 H608 Rexroth EMC-063-NN-2 Schischke MY_1106 E2 - voltage 380-480, 6 bar, 1300 kg, year of construction 2016 Knedpfxohufclj Agzsf Condition: used  Complete plant closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 200 mm -Hole circle: Ø 176/Ø 11 mm Ksdpfx Aged Rakhozonf -Hole circle: Ø 114/4 x M10 -Dimensions: Ø 200/H20 mm -Weight: 3.4 kg