Flat and plate processing

UWM UWM 100

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5 kW weight of the machine ca. 0,42 t dimensions of the machine ca. 1,23 x 1,7 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting Gjdefgyh Ujpfx Ah Ejbw • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, Year of construction: 2025, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Godpjg U Uv Rjfx Ah Ejbw Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: new, Cutting range: round 0°: 170 mm square 0°: 150 x 150 mm flat 0°: 150 x 190 mm round 45°: 125 mm square 45°: 95 x 120 mm working height : 870 mm cutting speeds : 40 / 80 m/min saw band: 2080 x 20 x 0,9 mm coolant pump: 100 W saw motor: 0,75 kW connection: 400 V dimensions L x W x H, approx.: 1340 x 810 x 1320 mm Weight, approx.: 146 kg Features: - Saw bow can be tilted up to 45°. - With 2 saw blade speeds for optimum adaptation to the workpiece - Ideal for cutting tubes, profile material as well as solid material made of VA, iron, etc. - Generously dimensioned saw arm for low-vibration work - Lowering of the saw arm via hydraulic lowering cylinder - Low noise level due to stable design - Switch-off after end of cut by micro limit switch - Quick-action vice for simple and fast workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results Gjdpfx Ahjilk H Tj Ejbw - Coolant system with pump - Incl. base frame - CE/IEC, German documentation and German service Scope of delivery: - BiMetal saw band 2080 x 20 x 0.9 mm, 6/10 ZpZ - Band tension adjustable via manometer - quick clamping vice - material stop - Coolant device with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic limit stop after end of cut - underframe

Condition: new, Motor power 1,2 kW 50Hz/400V Gjdpsgrlapofx Ah Eebw belt opening belt dimensions 2450 x 27 x 0,9 mm weight 240 Kg Speed 35 + 70 m/min. cutting surface 0° 220 / 210 x 150 / 230 x 185 mm Cutting surface 45° right Cutting area 45° left 150 / 150 x 150 / 150 x 210 mm Cutting area 60° right Cutting area 60° left 90 / 90 x 90 / 90 x 100 mm Description The Zimmer Z241/R is a self-lowering saw for mitre cuts from 0° - 60° left. After the cut the machine stops by a safety limit switch. The lowering is infinitely variable via a hydraulic system. The saw arm can be raised to any position after the cut. The saw arm remains in the desired position. The Z241/R has the following equipment: Hydraulic cylinder, emulsion pump, eccentric clamp, base frame, saw band, 400V plug -16A-. The machine is delivered completely assembled and ready for immediate use. Footprint: 870 x 1550 x 1740 mm Working height: 915 mm please ask for further versions

Condition: new, - Capacity 160 tons - Cylinder stroke 400 mm - Working width 1100 mm - Cylinder is movable - Electric or manual operation - Pressure gauge - Emergency stop - 400V Gbedpfog Sr Rpex Ah Eow

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, Gsdehpktvopfx Ah Eebw - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: new, Technical data: Capacity: 160 t Installation height: 1100 mm working area, max.: 1100 x 350 mm piston stroke: 400 mm Gbsdpfx Aek Nz Ntjh Eow forward speed: 6,2 mm/s return speed: 6,8 mm/s motor power: 5,5 kW width: 1640 mm depth: 1000 mm height: 2550 mm Weight, approx.: 1300 kg Equipment: - Laterally displaceable cylinder via rack, pinion and handwheel - Generous working area - Height adjustable table - Torsion-resistant design with welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump

Condition: new, Sawing band --- 2925 x 27 x 0.9 mm Sawing speed --- variable 20 ~ 80 M/min Motor --- 400V - 2.2 kW Weight --- 495 kg Cutting capacity 90 ----- 270 mm / 260 x 320 mm Cutting capacity 60 ----- 140 mm / 140 x 140 mm Cutting capacity 45 ----- 230 mm / 220 x 220 mm Cutting capacity -45 ---- 200 mm / 220 x 150 mm Godpfx Ahega Tzuj Ejbw INCLUDED Saw band Workpiece stop Pedestal Pressure gauge for sawbelt tension Saw band guide with carbide inserts Quick Release Clamp Cooling pump Hydraulic cylinder Motor protection switch Automatic end stop

Condition: new, cutting diameter 220 mm saw band length 2450 mm cutting width 250 mm cutting speed 40 / 80 m/min dimensions of saw-band 2450 x 27 x 0,9 mm 100 mm Gbjdpfx Aolb I A Ssh Esw 90 mm 90 x 90 mm 160 mm 160 x 110 mm 250 x 190 mm total power requirement 0,75 / 1,1 kW table height 925 mm weight of the machine ca. 218 kg dimensions of the machine ca. 1300 x 700 x 1530 mm