TALC POWDERING MACHINE FOR CABLES

VOGAMAKINA VMCABLE

Condition: excellent (used), Year of construction: 2012, - 3-axis CNC center SCM Pratix S - model PRATIX 12B from 2012. - Range X, Y, Z axes: 2500x1250x150+ mm - Number of tool spaces in the magazine: 8 - Machine table: Raster aluminum table, 2 sections. - Control: PC control - Software: SCM NESTING, SCM XILOG MAESTRO - Serial no.: AH/115920 Number of milling axes: 1 Drilling unit: 1 - practically unused Maximum spindle speed: 24,000 rpm Tool holder: HSK-F63 Main engine: 6.6 kW Table measurements: 130 cm x 260 cm Portal construction: Machine with movable portal Vacuum pumps: 2 pcs. BECKER from 2012 - one placed outside, the other installed in the machine. Vacuum pump capacity m³/h: 240/280 m³/h. Interface for reading CAD format (.dxf) Security: Rejects Weight approx. 2,500 kg Hedeuu Ntgspfx Ac Tsr Length: 5,900 mm Width: 2,790 mm Height: 2,190 mm Automatic tool length measurement

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø Hodpfsxtbf Eox Ac Tor 710 mm Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), I sell plasma cutter hypertherm powermax 800 d very good condition. /////Price listed for 1 pc ///// Hedpeulc Ixjfx Ac Ter Plasma cutter Hypertherm Powermax 800 Plasma cutter description The Powermax800 plasma cutting system uses an inverter power supply to provide a smooth DC output voltage for superior cutting and gouging of mild steel, stainless steel, aluminum and other metals. The Powermax800's power supply provides a constant output current that varies from 20 to 50 amps, providing optimal performance for all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and cut metals up to 1 inch (25 mm) thick.

Condition: as good as new (ex-display), functionality: fully functional, Panel saw ALTENDORF HAND GUARD latest software 7/26 TwinFlex edition with 12" touchscreen, double sliding table, adjustable on both sides, manual parallel fence adjustment, parallel fence with fine adjustment, control panel at eye level, adjustable, dimension input via touchscreen, F 45 ElmoDrive control system, electric height adjustment, electric tilt adjustment, AKE tool clamping system, automatic correction of cutting height, when the saw unit is tilted, easy axis calibration, machine diagnostics, operating hour counter, USB interface, dust-proof ----- Technical data ----- Swivel range: 0 - 46 °, Cutting length: 3,000 mm, Cutting width: 1,000 mm, max. saw blade diameter: 450 mm, max. saw blade overhang: 150 mm, angle stop with fixed position: 90 °, manually adjustable via measuring scale: 3,200 mm, speeds: 3,000 / 4,000 / 5,000 rpm, motor power 400 V: 7.5 hp / 5.5 kW, screen size: 12 ", machine height: 91 cm Optical protection system: Two cameras collect data for hand recognition from a wide area around the saw blade. Hodpfezgwl Iox Ac Tjr As soon as hands are detected in that area, the saw unit is quickly lowered and quickly stopped within a quarter of a second. EDITION TWINFLEX - Double sliding table 3,000 mm - Saw blade overhang 150 mm - Motor power VARIO 5 kW (6.8 hp) - Adjustable on both sides - Angle miter stop DIGIT LD, cutting length up to 3,200 mm - CNC parallel fence, cutting width 1,000 mm - On/off switch on the double sliding table - Template holder - Surcharge for motor power 6.5 kW (8.8 hp) ALTENDORF with VARIO, for adjustment on both sides - Scoring unit 2-axis, 2-sided, ALTENDORF with motorized height and side adjustment Scoring blade height programmable - Quick lowering and quick lifting, - Drive motor 0.75 kW (1 hp), 8,200 rpm. - Scoring system RAPIDO 180 mm ALTENDORF for adjustment on both sides - LED lighting on the scoring unit ALTENDORF - Double sliding table 3,400 mm, ALTENDORF - CNC parallel fence, 1,300 mm, ALTENDORF - Camera arm, can be swivelled out of the way ALTENDORF - Front support roller ALTENDORF Width 300 mm - Air cushion table ALTENDORF - Table extension 840 mm ALTENDORF with air cushion - HandGuard 2025 new version The machine is sold with a new warranty of 1 year. The machine can be purchased at an absolute special price. We would be happy to make you an offer.

Condition: new, Year of construction: 2023, power: 1,150 kW (1,563.56 HP), total length: 6,460 mm, total width: 1,600 mm, total height: 1,840 mm, Selling price: € 129.500, US$ 147.900 Current frequency: 50 Hz Voltage: 400 Hjdpexfrz Isfx Ac Tjr

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. Hodpfx Acsv Sa I To Tsr In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 32006, input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System 180 Degree Load System HSK-63 Spindle Auto Stroke Adjustment Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Diameter: 100 mm Workpiece With Internal Gear: -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm -Maximum Internal Diameter: 100 mm Tool: -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm -Maximum Stroke Length: 30 mm Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: -External Diameter: 220 mm -Clamping Diameter: 160 mm -Bore: 63 mm Speeds: Hjdpfx Asrtrvyoc Tjr -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: -Operating Voltage: 480V -Supply Voltage: 115V -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg

Year of construction: 2023, condition: new, Continuous power: 20.12 kVA / 16.10 kW Hodomw Ui Ropfx Ac Ter Voltage: 230 V / 400 V Frequency: 50 Hz Engine: Perkins 404J-22G Fuel: Diesel Tank capacity: 51 liters Generator type: IP21 protection class, MeccALte Starting mode: electric Generator with AVR control Dimensions and weight: Length (mm):1645 Width (mm):870 Height (mm):1072 Weight, dry: 640 kg

Condition: excellent (used), turning diameter over bed 900 mm turning diameter over slide rest 600 mm turning length 3000 mm spindle turning speed range 11,2 - 560 U/min Hedpfx Aeym D H Toc Tor tool holder Multifix D1 total power requirement 22 kW weight of the machine ca. 5,6 t dimensions of the machine ca. 5,6 x 1,8 x 1,7 m Safety-related conversion according to CE standard 2017 2011 new plan pull spindle, lock case partially renewed, lubrication according to internal plan

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Hsdpfx Aexfrv Eec Tsr Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands